您还可以使用 SunPlex Manager GUI 来完成此过程。有关详细信息,请参阅 SunPlex Manager 的联机帮助。
您可能需要禁用群集传输电缆,以便临时关闭群集互连路径。这在排除群集互连的故障或更换群集互连硬件时很有用。
禁用电缆后,电缆的两个端点仍处于已配置状态。如果适配卡仍用作传输电缆的一个端点,则无法删除该适配卡。
一个群集节点要成为一个群集的成员,至少需要有一个工作正常的电缆连接到群集互连。禁用电缆前,请务必检验节点的群集互连的状态。对于一个电缆连接,只有验证了它是冗余的(即除它之外还有另外一个连接),才予以禁用。禁用节点所剩的最后一个工作电缆会使该节点脱离群集。
成为群集中任一节点的超级用户。
禁用电缆前,请检查群集互连的状态。
# scstat -W |
如果在尝试删除由两个节点组成的群集中的一个节点时接收到错误(如 "path faulted"),请先调查问题,然后再继续进行此过程。这样的问题可能表明节点路径不可用。如果删除所剩的正常路径,则会使节点脱离群集,并可能导致重新配置群集。
输入 scsetup 实用程序。
# scsetup |
这时将显示主菜单。
通过键入 3(群集互连)来访问 "Cluster Interconnect" 菜单。
通过键入 8(禁用传输电缆)来禁用电缆。
按说明输入请求的信息。这时将禁用此群集互连中的所有组件。您需要输入您尝试标识的电缆的一个端点的节点名称和适配卡名称。
检验是否已禁用电缆。
# scconf -p | grep cable |
此示例说明了如何禁用节点 phys-schost-2 上的适配卡 qfe-1 上的群集传输电缆。
[Become superuser on any node.] [Enter the scsetup utility:] # scsetup Select Cluster interconnect>Disable a transport cable. Answer the questions when prompted. You will need the following information. You Will Need: Example: node names phys-schost-2 adapter names qfe1 junction names hub1 [Verify that the scconf command completed successfully:] scconf -c -m endpoint=phys-schost-2:qfe1,state=disabled Command completed successfully. Quit the scsetup Cluster Interconnect Menu and Main Menu. [Verify that the cable is disabled:] # scconf -p | grep cable Transport cable: phys-schost-2:qfe1@0 ethernet-1@2 Disabled Transport cable: phys-schost-3:qfe0@1 ethernet-1@3 Enabled Transport cable: phys-schost-1:qfe0@0 ethernet-1@1 Enabled |