使用此过程来恢复执行备份时元设备上存在的根 (/) 文件系统。比如: 在根磁盘损坏后更换新磁盘时,就可以执行此过程, 不应引导正在恢复的节点。在执行此恢复过程前确保群集正在无故障地运行。
由于必须使用与故障磁盘相同的格式来给新的磁盘进行分区,所以在进行此过程前必须确定分区方案,并相应地重新创建文件系统。
成为要恢复的节点之外的一个有权访问元集的群集节点的超级用户。
从所有元集中删除要恢复的节点的主机名。
# metaset -s setname -f -d -h nodelist |
指定元集名称。
强制。
从元集中删除。
指定要从元集中删除的节点的名称。
在要在其上恢复根 (/) 文件系统的节点上更换故障磁盘。
请参考服务器附带的文档中的磁盘更换过程。
引导要恢复的节点。
如果使用 Solaris CD-ROM,请运行以下命令:
ok boot cdrom -s |
如果使用 JumpStart 服务器,请运行以下命令:
ok boot net -s |
使用 format (1M) 命令在根磁盘上创建所有的分区和交换。
重建故障磁盘上的原分区方案。
使用 newfs (1M) 命令,相应地创建根 (/) 文件系统和其它文件系统
重建故障磁盘上的原文件系统。
确保创建 /global/.devices/node@nodeid 文件系统。
在一个临时安装点上安装根 (/) 文件系统。
# mount device temp-mount-point |
使用下面的命令来恢复根 (/) 文件系统。
# cd temp-mount-point # ufsrestore rvf dump-device # rm restoresymtable |
在新磁盘上安装一个新引导块。
# /usr/sbin/installboot /usr/platform/`uname -i`/lib/fs/ufs/bootblkraw-disk-device |
在 /temp-mount-point/etc/system 文件中删除有关 MDD 根信息的行。
* Begin MDD root info (do not edit) forceload: misc/md_trans forceload: misc/md_raid forceload: misc/md_mirror forceload: misc/md_hotspares forceload: misc/md_stripe forceload: drv/pcipsy forceload: drv/glm forceload: drv/sd rootdev:/pseudo/md@0:0,10,blk * End MDD root info (do not edit) |
对于作为元设备的一部分的根磁盘上的每一个文件系统,编辑 /temp-mount-point/etc/vfstab 文件以将根条目从元设备更改到对应的一个正常片上。
Example: Change from- /dev/md/dsk/d10 /dev/md/rdsk/d10 / ufs 1 no - Change to- /dev/dsk/c0t0d0s0 /dev/rdsk/c0t0d0s0 /usr ufs 1 no - |
卸载临时文件系统,并检查原始磁盘设备。
# cd / # umount temp-mount-point # fsck raw-disk-device |
以单用户模式重新引导节点。
# reboot -- "-s" |
使用 scdidadm 命令更换磁盘 ID。
# scdidadm -R rootdisk |
使用 metadb (1M) 命令来重建状态数据库复制品。
# metadb -c copies -af raw-disk-device |
指定要创建的复制品的编号。
在指定的原始磁盘设备上创建初始状态数据库复制品。
以群集模式重新引导该节点。
从已恢复的节点之外的一个群集节点,使用 metaset (1M) 命令来将恢复的节点添加到所有的元集中。
phys-schost-2# metaset -s setname -a -h nodelist |
添加(创建)元集。
根据 Solstice DiskSuite 文档为根 (/) 设置元设备/镜像。
节点已引导到群集模式下, 群集已经就绪。
下面的示例展示从磁带设备 /dev/rmt/0 恢复到节点 phys-schost-1 的根 (/) 文件系统。从群集中的另一节点 phys-schost-2 运行 metaset 命令,以删除节点 phys-schost-1,稍后再将它重新添加到元集 schost-1 中。所有其它命令都是从 phys-schost-1 上运行的。/dev/rdsk/c0t0d0s0 上创建了一个新的引导块,/dev/rdsk/c0t0d0s4 上重建了三个状态数据库复制品。
[Become superuser on a cluster node with access to the metaset, other than the node to be restored.] [Remove the node from the metaset:] phys-schost-2# metaset -s schost-1 -f -d -h phys-schost-1 [Replace the failed disk and boot the node:] ok boot cdrom -s [Use format and newfs to recreate partitions and file systems.] [Mount the root file system on a temporary mount point:] # mount /dev/dsk/c0t0d0s0 /a [Restore the root file system:] # cd /a # ufsrestore rvf /dev/rmt/0 # rm restoresymtable [Install a new boot block:] # /usr/sbin/installboot /usr/platform/`uname \ -i`/lib/fs/ufs/bootblk /dev/rdsk/c0t0d0s0 [Remove the lines in /temp-mount-point/etc/system file for MDD root information:] * Begin MDD root info (do not edit) forceload: misc/md_trans forceload: misc/md_raid forceload: misc/md_mirror forceload: misc/md_hotspares forceload: misc/md_stripe forceload: drv/pcipsy forceload: drv/glm forceload: drv/sd rootdev:/pseudo/md@0:0,10,blk * End MDD root info (do not edit) [Edit the /temp-mount-point/etc/vfstab file] Example: Change from- /dev/md/dsk/d10 /dev/md/rdsk/d10 / ufs 1 no - Change to- /dev/dsk/c0t0d0s0 /dev/rdsk/c0t0d0s0 /usr ufs 1 no - [Unmount the temporary file system and check the raw disk device:] # cd / # umount /a # fsck /dev/rdsk/c0t0d0s0 [Reboot in single-user mode:] # reboot -- "-s" [Replace the disk ID:] # scdidadm -R /dev/dsk/c0t0d0 [Recreate state database replicas:] # metadb -c 3 -af /dev/rdsk/c0t0d0s4 # reboot Type CTRL-d to boot into multiuser mode. [Add the node back to the metaset:] phys-schost-2# metaset -s schost-1 -a -h phys-schost-1 |