您也可使用 SunPlex Manager GUI 來完成此程序。請參閱 SunPlex Manager 線上說明,以取得詳細資訊。
請使用下列程序,來從節點配置移除叢集傳輸電纜、傳輸配接卡與傳輸接點。當電纜停用後,電纜的二個端點仍保持為配置狀態。如果配接卡仍當作傳輸電纜的端點使用,則無法移除。
叢集節點要求至少有一條作用中的電纜連到叢集交互連接,以成為叢集的成員。請務必要先確認節點的叢集交互連接的狀態,然後再停用電纜。請在驗證後發現某電纜為多餘 (有另一個連線可用) 時才停用該電纜。停用節點最後一條繼續運轉中的電纜會使該節點失去叢集成員的資格。
成為叢集中任何節點的超級使用者。
檢查其餘叢集傳輸路徑的狀態。
# scstat -W |
您試圖移除兩個節點叢集中的任一個節點而收到"路徑失效"的錯誤時,請先解決問題再繼續執行本程序。這種問題可能指示節點路徑無法使用。移除其餘好的路徑會使節點失去叢集成員資格,而導致必須重新配置。
輸入 scsetup 公用程式。
# scsetup |
顯示 Main Menu。
輸入 3 (叢集交互連接) 來存取「叢集交互連接功能表」。
輸入 4 (移除傳輸電纜) 來移除電纜。
請依指示進行並輸入所要求的資訊。
如果您移除實體電纜,請切斷電纜與通訊埠以及目標裝置之間的連接。
輸入 5 (從節點移除傳輸配接卡) 來移除配接卡。
請依指示進行並輸入所要求的資訊。
如果您要從節點移除實體配接卡,請參閱 Sun Cluster 3.0 U1 Hardware Guide,以取得硬體服務程序。
輸入 6 (移除傳輸接點) 來移除接點。
請依指示進行並輸入所要求的資訊。
當任何通訊埠仍被當作任何傳輸電纜的端點時,將無法移除接點。
確認電纜或配接卡成功移除。
# scconf -p | grep cable # scconf -p | grep adapter # scconf -p | grep junction |
從指定節點移除傳輸電纜或配接卡,應該不會出現在這個指令的輸出中。
以下範例顯示如何使用 scsetup 指令,來移除傳輸電纜、傳輸配接卡或傳輸接點。
[Become superuser on any node in the cluster.] [Enter the scsetup utility:] # scsetup Select Cluster interconnect. Select either Add a transport cable, Add a transport adapter to a node, or Add a transport junction. Answer the questions when prompted. You Will Need: Example: node names phys-schost-1 adapter names qfe1 junction names hub1 [Verify that the scconf command completed successfully:] "Command completed successfully." Quit the scsetup Cluster Interconnect Menu and Main Menu. [Verify that the cable, adapter, or junction is removed:] # scconf -p | grep cable Transport cable: phys-schost-2:qfe0@1 ethernet-1@2 Enabled Transport cable: phys-schost-3:qfe0@1 ethernet-1@3 Enabled Transport cable: phys-schost-1:qfe0@0 ethernet-1@1 Enabled # scconf -p | grep adapter Node transport adapters: qfe2 hme1 qfe0 Node transport adapter: qfe0 Node transport adapters: qfe0 qfe2 hme1 Node transport adapter: qfe0 Node transport adapters: qfe0 qfe2 hme1 Node transport adapter: qfe0 # scconf -p | grep junction Cluster transport junctions: hub0 hub2 Cluster transport junction: hub0 Cluster transport junction: hub2 |