How to Install Sun Cluster Support for Oracle Parallel Server/Real Application Clusters Packages With Hardware RAID (Sun Cluster 3.0 12/01 Data Services Installation and Configuration Guide)

Sun Cluster 3.0 12/01 Data Services Installation and Configuration Guide

How to Install Sun Cluster Support for Oracle Parallel Server/Real Application Clusters Packages With Hardware RAID

To complete this procedure, you need the Sun Cluster 3.0 Agents 12/01 CD-ROM. Perform this procedure on all of the cluster nodes that can run Sun Cluster Support for Oracle Parallel Server/Real Application Clusters.

Note -

Due to the preparation that is required prior to installation, the scinstall(1M) utility does not support automatic installation of the data service packages.

Load the Sun Cluster 3.0 Agents 12/01 CD-ROM into the CD-ROM drive.

Become superuser.

On all of the nodes, run the following command to install the data service packages.
# pkgadd -d . SUNWscucm SUNWudlm SUNWudlmr SUNWschwr

Caution -

Before you reboot the nodes, you must ensure that you have correctly installed and configured the Oracle UDLM software ("How to Install the Oracle UDLM Software"). Also verify that you have correctly installed your volume manager packages. If you use VxVM, check that you have installed the software and that the license for the VxVM cluster feature is valid. Otherwise, a panic will occur.

Where to Go From Here

Go to "Installing the Oracle Software" to install the Oracle UDLM and Oracle software.