Sun Cluster 3.0 12/01 소프트웨어 설치 안내서

예: 두 번째 노드에 Sun Cluster 소프트웨어 설치

다음은 scinstall 명령을 사용할 때 클러스터에 두 번째로 설치되는 노드 phys-schost-2에서 scinstall 유틸리티의 설치 작업이 완료된 후에 표시되는 진행 메시지의 예입니다.


>>> Confirmation <<<
  
    Your responses indicate the following options to scinstall:
  
      scinstall -ik \
           -C sc-cluster \
           -N phys-schost-1 \
           -A trtype=dlpi,name=hme1 -A trtype=dlpi,name=hme3 \
           -B type=switch,name=switch1 -B type=switch,name=switch2 \
           -m endpoint=:hme1,endpoint=switch1 \
           -m endpoint=:hme3,endpoint=switch2
  
    Are these the options you want to use (yes/no) [yes]?
  
    Do you want to continue with the install (yes/no) [yes]?
  
Checking device to use for global devices file system ... done
  
Adding node "phys-schost-2" to the cluster configuration ... done
Adding adapter "hme1" to the cluster configuration ... done
Adding adapter "hme3" to the cluster configuration ... done
Adding cable to the cluster configuration ... done
Adding cable to the cluster configuration ... done
  
Copying the config from "phys-schost-1" ... done
Setting the node ID for "phys-schost-2" ... done (id=2)
  
Checking for global devices global file system ... done
Updating vfstab ... done
  
Verifying that NTP is configured ... done
Installing a default NTP configuration ... done
Please complete the NTP configuration after scinstall has finished.
  
Verifying that "cluster" is set for "hosts" in nsswitch.conf ... done
Adding the "cluster" switch to "hosts" in nsswitch.conf ... done
  
Verifying that "cluster" is set for "netmasks" in nsswitch.conf ... done
Adding the "cluster" switch to "netmasks" in nsswitch.conf ... done
  
Verifying that power management is NOT configured ... done
Unconfiguring power management ... done
/etc/power.conf has been renamed to /etc/power.conf.61501001054
Power management is incompatible with the HA goals of the cluster.
Please do not attempt to re-configure power management.
  
Ensure network routing is disabled ... done
Network routing has been disabled on this node by creating /etc/notrouter.
Having a cluster node act as a router is not supported by Sun Cluster.
Please do not re-enable network routing.
  
Log file - /var/cluster/logs/install/scinstall.log.9853
  
  
Rebooting ...