按照此过程将根 (/) 文件系统恢复到一个新磁盘上,比如在替换一个坏的根磁盘后进行恢复。 不应引导正在恢复的节点。 在执行此恢复过程前确保群集正在无故障地运行。
由于必须使用与故障磁盘相同的格式来给新的磁盘进行分区,所以在进行此过程前必须确定分区方案,并相应地重新创建文件系统。
成为某个有权访问元集的群集节点(而不是所要恢复的那个节点)的超级用户。
从所有元集中删除要恢复的节点的主机名。
从元集中的某个节点(而非正要删除的那个节点)运行此命令。
# metaset -s setname -f -d -h nodelist |
指定磁盘集名称。
强制。
从磁盘集中删除。
指定要从磁盘集中删除的节点的名称。
替换正恢复其根 (/) 文件系统的那个节点上的故障磁盘。
请参阅服务器所附带的文档,以了解磁盘替换过程。
引导要恢复的节点。
如果使用 Solaris CD-ROM,请运行以下命令:
ok boot cdrom -s |
如果使用的是 Solaris JumpStartTM 服务器,则运行以下命令:
ok boot net -s |
使用 format(1M) 命令在根磁盘上创建所有的分区和交换。
重建故障磁盘上的原分区方案。
使用 newfs(1M) 命令适当创建根 (/) 文件系统和其他文件系统。
重建故障磁盘上的原文件系统。
确保创建了 /global/.devices/node@nodeid 文件系统。
在临时安装点上安装根 (/) 文件系统。
# mount device temp-mountpoint |
使用以下命令来恢复根 (/) 文件系统。
# cd temp-mountpoint # ufsrestore rvf dump-device # rm restoresymtable # cd / # umount temp-mountpoint # fsck raw-disk-device |
此时文件系统已恢复。
在新磁盘上安装新的引导块。
# /usr/sbin/installboot /usr/platform/`uname -i`/lib/fs/ufs/bootblk raw-disk-device |
以单用户模式重新引导节点。
# reboot -- "-s" |
使用 scdidadm 命令替换磁盘 ID。
# scdidadm -R rootdisk |
使用 metadb(1M) 命令来重建状态数据库的副本。
# metadb -c copies -af raw-disk-device |
指定所要创建的副本数量。
要在其上创建副本的原始磁盘设备。
添加副本。
以群集模式重新引导该节点。
从除所恢复的那个节点之外的任何一个群集节点,使用 metaset(1M) 命令将所恢复的那个节点添加到所有元集。
phys-schost-2# metaset -s setname -a -h nodelist |
创建并将主机添加到磁盘集中。
已将节点重新引导到群集模式下。 群集已经就绪。
下面的示例展示了将根 (/) 文件系统从磁带设备 /dev/rmt/0 恢复到节点 phys-schost-1 的过程。从群集中的另一节点 phys-schost-2 运行 metaset 命令,以删除节点 phys-schost-1,稍后再将它重新添加到磁盘集 schost-1 中。 所有其他命令都是从 phys-schost-1 上运行的。 在 /dev/rdsk/c0t0d0s0 上创建了一个新的引导块,而状态数据库的三个副本则是在 /dev/rdsk/c0t0d0s4 上重建的。
[Become superuser on a cluster node other than the node to be restored.] [Remove the node from the metaset:] phys-schost-2# metaset -s schost-1 -f -d -h phys-schost-1 [Replace the failed disk and boot the node:] ok boot cdrom -s [Use format and newfs to recreate partitions and file systems.] [Mount the root file system on a temporary mount point:] # mount /dev/dsk/c0t0d0s0 /a [Restore the root file system:] # cd /a # ufsrestore rvf /dev/rmt/0 # rm restoresymtable # cd / # umount /a # fsck /dev/rdsk/c0t0d0s0 [Install a new boot block:] # /usr/sbin/installboot /usr/platform/`uname \ -矛/lib/fs/ufs/bootblk /dev/rdsk/c0t0d0s0 [Reboot in single-user mode:] # reboot -- "-s" [Replace the disk ID:] # scdidadm -R /dev/dsk/c0t0d0 [Recreate state database replicas:] # metadb -c 3 -af /dev/rdsk/c0t0d0s4 # reboot Press CTL-d to boot into multiuser mode. [Add the node back to the metaset:] phys-schost-2# metaset -s schost-1 -a -h phys-schost-1 |