Sun Cluster 3.1 Software Installation Guide

Example—Installing Sun Cluster Software on the Second Node

The following example shows the scinstall command executed and progress messages displayed as scinstall installation tasks are completed on the node phys-schost-2, which is the second node to be installed in the cluster.


 >>> Confirmation <<<
  
    Your responses indicate the following options to scinstall:
  
      scinstall -ik \
           -C sc-cluster \
           -N phys-schost-1 \
           -A trtype=dlpi,name=hme1 -A trtype=dlpi,name=hme3 \
           -B type=switch,name=switch1 -B type=switch,name=switch2 \
           -m endpoint=:hme1,endpoint=switch1 \
           -m endpoint=:hme3,endpoint=switch2
  
    Are these the options you want to use (yes/no) [yes]?
  
    Do you want to continue with the install (yes/no) [yes]?
  
Checking device to use for global devices file system ... done
  
Adding node "phys-schost-2" to the cluster configuration ... done
Adding adapter "hme1" to the cluster configuration ... done
Adding adapter "hme3" to the cluster configuration ... done
Adding cable to the cluster configuration ... done
Adding cable to the cluster configuration ... done
  
Copying the config from "phys-schost-1" ... done
Setting the node ID for "phys-schost-2" ... done (id=2)
  
Checking for global devices global file system ... done
Updating vfstab ... done
  
Verifying that NTP is configured ... done
Installing a default NTP configuration ... done
Please complete the NTP configuration after scinstall has finished.
  
Verifying that "cluster" is set for "hosts" in nsswitch.conf ... done
Adding the "cluster" switch to "hosts" in nsswitch.conf ... done
  
Verifying that "cluster" is set for "netmasks" in nsswitch.conf ... done
Adding the "cluster" switch to "netmasks" in nsswitch.conf ... done
  
Verifying that power management is NOT configured ... done
Unconfiguring power management ... done
/etc/power.conf has been renamed to /etc/power.conf.61501001054
Power management is incompatible with the HA goals of the cluster.
Please do not attempt to re-configure power management.
  
Ensure network routing is disabled ... done
Network routing has been disabled on this node by creating /etc/notrouter.
Having a cluster node act as a router is not supported by Sun Cluster.
Please do not re-enable network routing.
  
Log file - /var/cluster/logs/install/scinstall.log.9853
  
  
Rebooting ...