Index (Sun Cluster 3.1 10/03 Software Installation Guide)

Sun Cluster 3.1 10/03 Software Installation Guide


A

	adapters
		IP Network Multipathing groups
			requirements ( )
			test IP addresses ( )
		`local-mac-address?` variable
			changes during upgrade ( )
			requirements ( )
		SCI-PCI
			configuring on additional nodes ( )
			configuring on all nodes ( ) ( )
			installing Solaris packages ( )
			installing Solaris packages with JumpStart ( )
			installing Sun Cluster packages ( ) ( )
			installing Sun Cluster packages with JumpStart ( )
			package requirements ( )
			port names ( )

	adding
		See also installing
		disk drives to a diskset ( )
		mediator hosts ( )
		nodes to the Sun Cluster module to Sun Management Center ( )

	administrative console
		installing CCP software ( )
		IP addresses ( )
		`MANPATH` ( )
		`PATH` ( )

	alternate boot path, displaying ( )

	Apache
		installing packages
			by using JumpStart ( )
			by using `pkgadd` ( )
		modifying links during upgrade ( )

	authentication
		authorized-node list
			adding nodes ( )
			removing nodes ( )
		DES ( ) ( )

	authorized-node list
		adding nodes ( )
		removing nodes ( )

	`autoscinstall.class` file ( )


B

	boot devices, alternate boot path ( )


C

	C locale ( ) ( )

	`cconsole` command ( )
		installing the software ( )
		using ( ) ( )

	`ccp` command ( )

	CCP software
		installing ( )
		starting ( )

	checking
		See verifying

	`class` file, modifying ( )

	Cluster Control Panel (CCP) software
		installing ( )
		starting ( )

	cluster file systems
		caution notice ( )
		configuring ( )
		planning ( ) ( )
		required mount options ( )
		verifying the configuration ( )
		VxFS restrictions ( )

	cluster interconnects
		configuring
			additional nodes ( )
			by using JumpStart ( )
			by using `scinstall` ( ) ( )
			by using SunPlex Manager ( )
		planning ( )

	cluster mode, verifying ( )

	cluster name ( )

	cluster nodes
		adding to the Sun Cluster module to Sun Management Center ( )
		DES authentication ( ) ( )
		determining the node-ID number ( )
		installing
			additional nodes ( )
			by using JumpStart ( )
			by using `scinstall` ( ) ( )
			by using SunPlex Manager ( )
			single-node clusters ( )
		planning ( )
		upgrading
			nonrolling ( )
			rolling ( )
		verifying cluster mode ( )

	`clusters` file, administrative console ( )

	configuring
		cluster file systems ( )
		disksets ( )
		IP Network Multipathing groups ( ) ( )
		`md.tab` file ( )
		name-service switch ( )
		Network Time Protocol (NTP) ( )
		quorum devices ( )
		Solaris Volume Manager ( )
		Solstice DiskSuite ( )
		state database replicas ( )
		user work environment ( )
		VERITAS Volume Manager (VxVM) ( )

	console-access devices
		IP addresses ( )
		planning ( )
		serial-port numbers ( )

	creating
		See configuring


D

	Data Encryption Standard (DES) authentication ( ) ( )

	data services
		installing
			by using `scinstall` ( )
			by using SunPlex Manager ( )
		upgrading
			nonrolling ( )
			rolling ( )

	deporting disk device groups ( )

	DES authentication ( ) ( )

	device groups
		See also disk device groups
		See also raw-disk device groups
		evacuating ( ) ( )

	device-ID names
		determining ( )
		displaying ( )
		updating after upgrade ( )

	DID driver, updating ( )

	Dirty Region Logging (DRL), planning ( )

	disabling
		installation mode ( )
		resources ( )

	disk device groups
		See also raw-disk device groups
		importing and deporting ( )
		planning ( )
		registering changes to ( )
		registering disk groups as ( )
		reminoring ( )
		status ( )
		verifying
			evacuation ( )
			registration ( )

	disk drives
		adding to disksets ( )
		mirroring differing disk sizes ( )
		repartitioning ( )

	disk groups
		See also disk device groups
		configuring ( )
		registering as disk device groups ( )
		verifying the configuration ( )

	disk strings, mediator requirements ( )

	disks
		See disk drives

	disksets
		adding disk drives ( )
		configuring ( )
		planning the maximum number ( )
		repartitioning disk drives ( )
		setting the maximum number ( )

	domain console network interfaces, IP addresses ( )

	drives
		See disk drives

	DRL, planning ( )

	Dynamic Multipathing (DMP) ( ) ( ) ( )


E

	enabling the kernel cage ( )

	encapsulated root disks
		configuring ( )
		mirroring ( )
		planning ( )

	Enclosure-Based Naming, planning ( )

	error messages
		cluster ( )
		`metainit` command ( )
		`sccheck` command ( ) ( ) ( )
		`scconf` command ( )
		`scdidadm` command ( )
		`scgdevs` command ( )
		SunPlex Manager ( )
		`xntpd` daemon ( )

	`/etc/clusters` file ( )

	`/etc/inet/hosts` file ( ) ( ) ( )

	`/etc/inet/ntp.conf.cluster` file
		configuring ( )
		starting ( )

	`/etc/inet/ntp.conf` file
		changes during upgrade ( )
		configuring ( )
		starting ( )

	`/etc/init.d/xntpd.cluster start` command ( )

	`/etc/init.d/xntpd start` command ( )

	`/etc/lvm/md.tab` file ( )

	`/etc/name_to_major` file
		non-VxVM nodes ( ) ( ) ( )
		VxVM–installed nodes ( ) ( ) ( )

	`/etc/nsswitch.conf` file ( )

	`/etc/release` file ( )

	`/etc/serialports` file ( )

	`/etc/system` file
		`kernel_cage_enable` variable ( )
		stack-size setting ( ) ( )

	`/etc/vfstab` file
		adding mount points ( )
		modifying during upgrade
			nonrolling ( )
			rolling ( )
		verifying the configuration ( )

	Ethernet adapters
		`local-mac-address?` variable
			changes during upgrade ( )
			requirements ( )

	evacuating, resource groups and device groups ( )


F

	file–system logging, planning ( )

	`finish` script, JumpStart ( )


G

	global devices
		caution notice ( )
		`/global/.devices` directory
			mirroring ( )
			`node@nodeid` file system ( )
		`/globaldevices` partition
			creating ( )
			planning ( )
		planning ( )
		updating the namespace ( )

	`/global` directory ( )

	global file systems
		See cluster file systems


H

	help ( )

	`hosts` file ( ) ( ) ( )

	hot spare disks, planning ( )


I

	importing disk device groups ( )

	initialization files ( )

	installation mode ( )

	installing
		See also adding
		Apache packages
			by using JumpStart ( )
			by using `pkgadd` ( )
		Cluster Control Panel (CCP) ( )
		data services
			by using `scinstall` ( )
			by using SunPlex Manager ( )
			by using Web Start ( )
		RSMAPI
			Solaris packages ( ) ( )
			Sun Cluster packages ( ) ( )
			Sun Cluster packages with JumpStart ( )
		Solaris
			alone ( )
			with Sun Cluster ( )
		Solstice DiskSuite ( )
			by using SunPlex Manager ( )
			from the Solaris CD-ROM ( )
		Sun Cluster
			additional nodes ( )
			by using JumpStart ( )
			by using SunPlex Manager ( )
			custom ( )
			module to Sun Management Center ( )
			single-node clusters ( )
			status ( )
			typical ( )
			verifying ( )
		Sun Management Center
			requirements ( )
			Sun Cluster module ( )
		SunPlex Manager ( )
		VERITAS File System (VxFS) ( ) ( )
		VERITAS Volume Manager (VxVM) ( )
			and encapsulating the root disk ( )
			without encapsulating the root disk ( )

	interconnects
		See cluster interconnects

	IP addresses, planning ( )

	IP Network Multipathing groups
		configuring ( ) ( )
		planning ( )
		test-IP-address requirements
			planning ( )
			upgrade ( )
		upgrading NAFO groups ( ) ( )

	IPMP
		See IP Network Multipathing groups


J

	JumpStart
		`class` file ( )
		`/etc/inet/hosts` file ( )
		`finish` script ( )
		installing Solaris and Sun Cluster ( )

	junctions
		See transport junctions


K

	`kernel_cage_enable` variable ( )

	`/kernel/drv/md.conf` file ( )
		caution notice ( ) ( )
		configuring ( )


L

	licenses, planning ( )

	loading the Sun Cluster module to Sun Management Center ( )

	`local-mac-address?` variable
		changes during upgrade ( )
		requirements ( )

	locales ( ) ( )

	`localonly` property, enabling ( )

	log files
		`sccheck` command ( )
		Sun Cluster installation ( )
		SunPlex Manager installation ( )
		Web Start installation ( )

	logging for cluster file systems
		planning ( )
		Solstice DiskSuite/Solaris Volume Manager ( )
		UFS ( )
		VxFS ( )

	logical addresses, planning ( )


M

	`MANPATH`
		administrative console ( )
		cluster nodes ( )

	`md.conf` file
		caution notice ( )
		configuring ( )
		planning ( )

	`md_nsets` field
		configuring ( )
		planning ( )

	`md.tab` file, configuring ( )

	mediators
		adding hosts ( )
		overview ( )
		planning ( )
		repairing data ( )
		status ( )

	`messages` files
		See also error messages
		cluster ( )
		SunPlex Manager ( )

	metadevices
		activating ( )
		planning the maximum number ( )
		setting the maximum number ( )

	minor-number conflicts, repairing ( )

	mirroring
		differing disk sizes ( )
		global namespace ( )
		multihost disks ( )
		planning ( )
		root disks ( )
			caution notice ( )
			planning ( )

	mount options for cluster file systems
		requirements ( )
		Solstice DiskSuite/Solaris Volume Manager ( )
		UFS ( )
		VxFS ( ) ( )

	mount points
		cluster file systems ( )
		modifying the `/etc/vfstab` file ( )
		nested ( )

	multihost disks, mirroring ( )

	multiported disks, planning ( )


N

	NAFO groups
		See also IP Network Multipathing groups
		upgrading to IP Network Multipathing groups ( )

	name-service switch, configuring ( )

	`name_to_major` file
		non-VxVM nodes ( ) ( ) ( )
		VxVM–installed nodes ( )

	Network Time Protocol (NTP)
		configuring ( )
		`xnptd` daemon error messages ( )

	`nmd` field
		configuring ( )
		planning ( )

	node lists
		disk device groups ( )
		raw-disk device groups
			removing nodes from ( )
			viewing ( )

	nodes
		See cluster nodes

	noncluster mode
		rebooting into ( )
		rebooting into single-user ( ) ( )

	`nsswitch.conf file`, configuring ( )

	NTP
		configuring ( )
		`xnptd` daemon error messages ( )

	`ntp.conf.cluster` file
		configuring ( )
		starting ( )

	`ntp.conf` file
		changes during upgrade ( )
		configuring ( )
		starting ( )


O

	online help, Sun Cluster module to Sun Management Center ( )

	`/opt/SUNWcluster/bin/cconsole` command ( )
		installing the software ( )
		using ( ) ( )

	`/opt/SUNWcluster/bin/ccp` command ( )

	`/opt/SUNWcluster/bin` directory ( )

	`/opt/SUNWcluster/man` directory ( )


P

	partitions
		`/globaldevices` ( ) ( )
		repartitioning disk drives ( )
		root (`/`) ( )
		`/sds` ( )
		`swap` ( )
		volume manager ( )

	patches
		default installation directory ( )
		patch-list file ( )
		planning ( )

	`PATH`
		administrative console ( )
		cluster nodes ( )

	PCI adapters
		See SCI-PCI adapters

	ports
		See serial ports

	private hostnames
		changing ( )
		planning ( )
		verifying ( )

	private network, planning ( )

	profile, JumpStart ( )

	public network, planning ( )


Q

	quorum devices
		caution notice ( )
		initial setup ( )
		and mirroring ( )
		planning ( )


R

	raw-disk device group node lists
		removing nodes ( )
		viewing ( )

	raw-disk device groups
		See disk device groups

	rebooting
		into noncluster mode ( )
		into single-user noncluster mode ( ) ( )

	registering, VxVM disk device groups ( )

	`release` file ( )

	Remote Shared Memory Application Programming Interface (RSMAPI)
		package requirements ( )
		Solaris packages
			installing by using JumpStart ( )
			installing by using `pkgadd` ( )
		Sun Cluster packages
			installing by using JumpStart ( ) ( )
			installing by using `pkgadd` ( )

	removing Sun Cluster software ( )

	repairing
		mediator data ( )
		minor-number conflicts ( )
		storage reconfiguration during upgrade ( )

	resource groups
		evacuating ( ) ( )
		making unmanaged ( )
		taking offline ( )
		verifying ( )

	resource types
		reregistering after upgrade ( ) ( )

	resources
		disabling ( )
		listing ( )

	root (`/`) file systems, mirroring ( )

	root-disk groups (`rootdg`)
		configuring
			on encapsulated root disks ( )
			on nonroot disks ( )
		planning ( )

	root disks
		encapsulating ( )
		mirroring ( )
			caution notice ( )
			planning ( )
		unencapsulating ( )

	root environment, configuring ( )

	`rpcmod` settings ( ) ( )

	RSMAPI
		See Remote Shared Memory Application Programming Interface (RSMAPI)


S

	`sccheck` command
		log files ( )
		preinstallation check ( ) ( ) ( ) ( )
		Sun Explorer requirement ( ) ( )
		`vfstab` file check ( )

	`scconf` command
		adding nodes to the authorized-node list ( )
		enabling the `localonly` property ( ) ( ) ( ) ( )
		error messages ( )
		removing nodes from a node list
			authorized-node list ( )
			raw-disk device groups ( ) ( )
		verifying installation mode ( )
		viewing private hostnames ( )

	`scdidadm` command
		determining device-ID names ( )
		displaying device-ID names ( )
		error messages ( )
		updating device IDs after upgrade ( ) ( )
		verifying device-ID conversion ( ) ( )

	`scgdevs` command
		error messages ( )
		updating the global-devices namespace ( )
		verifying command processing ( )

	SCI-PCI adapters
		configuring
			on additional nodes ( )
			on all nodes ( ) ( )
		package requirements ( )
		port names ( )
		Solaris packages
			installing by using JumpStart ( )
			installing by using `pkgadd` ( )
		Sun Cluster packages
			installing by using JumpStart ( ) ( )
			installing by using `pkgadd` ( )

	`scinstall` command
		installing Sun Cluster
			additional nodes ( )
			by using JumpStart ( )
			custom ( )
			data services ( )
			single-node clusters ( )
			typical ( )
		uninstalling Sun Cluster ( )
		upgrading data services ( )
		upgrading Sun Cluster
			nonrolling ( )
			rolling ( )
		verifying Sun Cluster software ( )

	`scrgadm` command, listing resources ( )

	`scsetup` command
		changing private hostnames ( )
		postinstallation setup ( )
		registering disk device groups ( )

	`scshutdown` command ( )

	`scstat` command
		verifying cluster mode ( )
		verifying disk-group configurations ( )

	`scswitch` command
		disabling resources ( )
		evacuating resource groups and device groups ( ) ( )
		making resource groups unmanaged ( )
		taking resource groups offline ( )

	`scvxinstall` command
		installing VxVM and encapsulating the root disk ( )
		installing VxVM only ( )

	`/sds` partition ( )

	secondary root disks ( )

	serial ports
		configuring on the administrative console ( )
		Simple Network Management Protocol (SNMP) ( )

	`serialports` file ( )

	shutting down the cluster ( )

	Simple Network Management Protocol (SNMP), port for Sun Management Center ( )

	single-node clusters ( )

	single-user noncluster mode
		rebooting into ( ) ( )

	SNMP, port for Sun Management Center ( )

	Solaris
		installing
			alone ( )
			with Sun Cluster ( )
		planning ( )
			`/globaldevices` file system ( )
			partitions ( )
			root (`/`) file system ( )
			software groups ( )
			volume managers ( )
		restrictions
			automatic power-saving shutdown ( )
			interface groups ( )
		upgrading
			nonrolling ( )
			rolling ( )
		verifying device-ID conversion ( )
		version ( )

	Solaris Volume Manager
		coexistence with VxVM ( ) ( )
		configuring ( )
		disksets
			adding disk drives ( )
			configuring ( )
			repartitioning disk drives ( )
			setting the maximum number ( )
		error messages ( )
		`MANPATH` ( )
		`md.tab` file ( )
		mediators
			adding hosts ( )
			overview ( ) ( )
			repairing bad data ( )
			status ( )
		mirroring
			global namespace ( )
			root (`/`) file system ( )
			root disks ( )
		planning ( )
		state database replicas ( )
		transactional-volume logging
			configuring ( )
			planning ( )
		volumes
			activating ( )
			planning the maximum number ( )
			setting the maximum number ( )

	Solstice DiskSuite
		coexistence with VxVM ( ) ( )
		configuring ( )
		disksets
			adding disk drives ( )
			configuring ( )
			repartitioning disk drives ( )
			setting the maximum number ( )
		error messages ( )
		installing ( )
			by using SunPlex Manager ( )
			from the Solaris CD-ROM ( )
		`MANPATH` ( )
		`md.tab` file ( )
		mediators
			adding hosts ( )
			overview ( ) ( )
			repairing bad data ( )
			status ( )
		metadevices
			activating ( )
			planning the maximum number ( )
			setting the maximum number ( )
		mirroring
			root (`/`) file system ( )
			root disks ( )
		planning ( )
		state database replicas ( )
		trans-metadevice logging
			configuring ( )
			planning ( )

	SSP
		See console-access devices

	stack-size setting ( ) ( )

	starting
		Cluster Control Panel (CCP) ( )
		Sun Management Center ( )
		SunPlex Manager ( )

	state database replicas, configuring ( )

	status
		disk device groups ( )
		mediators ( )
		Sun Cluster
			installation logs ( )
			verifying ( )

	Sun Cluster module to Sun Management Center ( )
		adding nodes ( )
		installing ( )
		loading ( )
		online help ( )
		requirements ( ) ( )
		upgrade
			nonrolling ( )
			rolling ( )

	Sun Enterprise 10000 servers
		dynamic reconfiguration support ( )
		`kernel_cage_enable` variable ( )
		`serialports` file ( )

	Sun Explorer
		minimum required version ( ) ( )
		upgrading ( ) ( )

	Sun Fire 15000 servers
		IP addresses ( )
		serial-port numbers ( )

	Sun Management Center
		starting ( )
		Sun Cluster module ( )
			adding nodes ( )
			installing ( )
			loading ( )
			online help ( )
			upgrading ( ) ( )
		upgrading ( )

	SunPlex Manager ( )
		installing ( )
		starting ( )
		using to install software ( )

	`swap`, planning ( )

	SyMON
		See Sun Management Center

	system controllers (SC)
		See console-access devices

	`system` file
		`kernel_cage_enable` variable ( )
		stack-size setting ( ) ( )

	System Service Processor (SSP)
		See console-access devices


T

	technical support ( )

	`telnet` command, serial-port numbers ( )

	terminal concentrators (TC)
		See console-access devices

	test-IP-address requirements
		new installations ( )
		upgrades ( ) ( )

	three-way mirroring ( )

	transport adapters
		See adapters

	transport junctions
		planning ( )
		port names
			configuring ( )
			planning ( )


U

	UFS logging
		configuring ( )
		planning ( )

	unencapsulating the root disk ( )

	uninstalling Sun Cluster software ( )

	upgrading
		choosing an upgrade method ( )
		guidelines for ( )
		nonrolling ( )
			data services ( )
			preparing the cluster ( )
			resource types ( )
			Solaris ( )
		recovering from storage changes ( )
		rolling ( )
			data services ( )
			preparing the cluster ( )
			resource types ( )
			Solaris ( )
		Sun Cluster module to Sun Management Center ( ) ( )
		Sun Explorer ( ) ( )
		Sun Management Center ( )
		verifying
			cluster status ( )
			device-ID conversion ( )
			successful upgrade ( )
			version ( )

	user-initialization files, modifying ( )

	`/usr/cluster/bin` directory ( )

	`/usr/cluster/bin/sccheck` command
		log files ( )
		preinstallation check ( ) ( ) ( ) ( )
		Sun Explorer requirement ( ) ( )
		`vfstab` file check ( )

	`/usr/cluster/bin/scconf` command
		adding nodes to the authorized-node list ( )
		enabling the `localonly` property ( ) ( ) ( ) ( )
		error messages ( )
		removing nodes from a node list
			authorized-node list ( )
			raw-disk device groups ( ) ( )
		verifying installation mode ( )
		viewing private hostnames ( )

	`/usr/cluster/bin/scdidadm` command
		determining device-ID names ( )
		displaying device-ID names ( )
		error messages ( )
		updating device IDs after upgrade ( ) ( )
		verifying device-ID conversion ( ) ( )

	`/usr/cluster/bin/scgdevs` command
		error messages ( )
		updating the global-devices namespace ( )
		verifying command processing ( )

	`/usr/cluster/bin/scinstall` command
		installing Sun Cluster
			additional nodes ( )
			by using JumpStart ( )
			custom ( )
			data services ( )
			single-node clusters ( )
			typical ( )
		uninstalling Sun Cluster ( )
		verifying Sun Cluster software ( )

	`/usr/cluster/bin/scrgadm` command, listing resources ( )

	`/usr/cluster/bin/scsetup` command
		changing private hostnames ( )
		postinstallation setup ( )
		registering disk device groups ( )

	`/usr/cluster/bin/scshutdown` command ( )

	`/usr/cluster/bin/scstat` command
		verifying cluster mode ( )
		verifying disk-group configurations ( )

	`/usr/cluster/bin/scswitch` command
		disabling resources ( )
		evacuating resource groups and device groups ( ) ( )
		making resource groups unmanaged ( )
		taking resource groups offline ( )

	`/usr/cluster/bin/scvxinstall` command
		installing VxVM and encapsulating the root disk ( )
		installing VxVM only ( )

	`/usr/cluster/man` directory ( )


V

	`/var/sadm/install/logs` directory ( )

	`/var/adm/messages` file ( )

	`/var/cluster/spm/messages` file ( )

	verifying ( )
		cluster status ( )
		device group configurations ( )
		device-ID conversion ( )
		installation mode ( )
		preconfiguration requirements ( ) ( )
		resource group configurations ( )
		`scgdevs` command processing ( )
		upgrade ( ) ( )
		`vfstab` configuration ( )
		VxVM disk-group configurations ( )

	VERITAS File System (VxFS)
		administering ( )
		installing ( ) ( )
		logging
			configuring ( )
			planning ( )
		mounting cluster file systems ( ) ( )
		`PATH` ( )
		planning ( )

	VERITAS Volume Manager (VxVM)
		and Dynamic Multipathing (DMP) ( )
		cluster feature ( )
		configuring ( )
			disk groups ( )
			non-VxVM nodes ( ) ( )
			volumes ( )
		disk device groups
			importing and deporting ( )
			reminoring ( )
		disk-group registration ( )
		Dynamic Multipathing (DMP) ( )
		encapsulation ( )
		Enclosure-Based Naming ( )
		installing ( )
			and encapsulating the root disk ( )
			VxVM only ( )
		`MANPATH` ( )
		mirroring the encapsulated root disk ( )
		`PATH` ( )
		planning ( ) ( )
		removing man pages ( ) ( )
		root-disk groups (`rootdg`)
			configuring on nonroot disks ( )
			planning ( ) ( )
		root disks
			caution when unencapsulating ( )
			unencapsulating ( )
		verifying disk-group configurations ( )

	`vfstab` file
		adding mount points ( )
		modifying during upgrade
			nonrolling ( )
			rolling ( )
		verifying the configuration ( )

	`vold` daemon ( )

	volume managers
		See also VERITAS Volume Manager (VxVM)
		partitions ( )
		planning
			general ( )
			Solaris Volume Manager ( )
			Solstice DiskSuite ( )
			VERITAS Volume Manager ( )

	volumes
		Solaris Volume Manager
			activating ( )
			planning the maximum number ( )
			setting the maximum number ( )
		VxVM
			configuring ( )
			verifying ( )

	VxFS
		See VERITAS File System (VxFS)

	`vxio` driver major number
		non-VxVM nodes ( ) ( )
		VxVM–installed nodes ( ) ( )

	VxVM
		See VERITAS Volume Manager (VxVM)


W

	Web Start package installation
		Cluster Control Panel (CCP) software ( )
		data services ( )
		Sun Cluster software ( )


X

	`xntpd.cluster start` command ( )

	`xntpd start` command ( )