Exécutez la commande scshutdown( 1M) pour arrêter le cluster, puis initialisez le cluster à l'aide de la commande boot( 1M) sur chaque noeud.
SPARC : si votre cluster exploite Oracle Parallel Server/Real Application Clusters, fermez toutes les instances de la base de données.
Reportez-vous à la documentation d'Oracle Parallel Server/Real Application Clusters pour connaître les procédures d'arrêt.
Devenez superutilisateur sur un noeud du cluster.
Arrêtez le cluster.
Sur un noeud du cluster, entrez la commande suivante :
# scshutdown -g0 -y |
Chaque noeud est arrêté.
les noeuds de cluster doivent avoir une connexion fonctionnelle avec l'interconnexion du cluster pour en devenir membres.
Initialisez chaque noeud.
L'ordre d'initialisation des noeuds n'a aucune incidence, sauf si vous modifiez la configuration entre les arrêts. Si vous modifiez la configuration entre les arrêts,dans ce cas initialisez d'abord le noeud dont la configuration est la plus récente.
SPARC :
ok boot |
x86 :
<<< Paramètres d'initialisation actuels>>> Chemin d'initialisation : /pci@0,0/pci8086,2545@3/pci8086,1460@1d/pci8086,341a@7,1/sd@0,0:a Arguments d'initialisation : Entrez b [nom fichier] [balises d'initialisation] <ENTER> pour initialiser les options ou i <ENTER> pour accéder à l'interprète d'initialisation ou <ENTER> pour initialiser les paramètres par défaut <<< déconnexion automatique dans 5 secondes >>> Sélectionnez (b)oot ou (i)nterpreter : b |
Vérifiez que les noeuds sont correctement initialisés et qu'ils sont en ligne.
La commande scstat(1M) récapitule le statut des noeuds.
# scstat -n |
si le système de fichiers /var du noeud d'un cluster est saturé, il est possible que Sun Cluster ne puisse pas redémarrer sur ce noeud. Le cas echéant, reportez-vous à la rubrique Réparation d'un système de fichiers /var saturé.
L'exemple suivant reproduit l'affichage de la console lors d'un arrêt normal du cluster avec retour de tous les noeuds à l'invite ok, suivi du redémarrage du cluster. L'option -g 0 remet le délai à zéro et -y répond automatiquement oui à la demande de confirmation. Les messages d'arrêt apparaissent également sur les consoles des autres noeuds du cluster.
# scshutdown -g0 -y Wed Mar 10 13:47:32 phys-schost-1 cl_runtime: WARNING: CMM monitoring disabled. phys-schost-1# INIT: New run level: 0 The system is coming down. Please wait. ... The system is down. syncing file systems... done Program terminated ok boot Rebooting with command: boot ... Hostname: phys-schost-1 Booting as part of a cluster ... NOTICE: Node phys-schost-1: attempting to join cluster ... NOTICE: Node phys-schost-2 (incarnation # 937690106) has become reachable. NOTICE: Node phys-schost-3 (incarnation # 937690290) has become reachable. NOTICE: cluster has reached quorum. ... NOTICE: Cluster members: phys-schost-1 phys-schost-2 phys-schost-3. ... NOTICE: Node phys-schost-1: joined cluster ... The system is coming up. Please wait. checking ufs filesystems ... reservation program successfully exiting Print services started. volume management starting. The system is ready. phys-schost-1 console login: NOTICE: Node phys-schost-1: joined cluster ... The system is coming up. Please wait. checking ufs filesystems ... reservation program successfully exiting Print services started. volume management starting. The system is ready. phys-schost-1 console login: |
L'exemple suivant reproduit l'affichage de la console lors d'un arrêt normal du cluster avec retour de tous les noeuds, suivi du redémarrage du cluster. L'option -g 0 remet le délai à zéro et -y répond automatiquement yes à la demande de confirmation. Les messages d'arrêt apparaissent également sur les consoles des autres noeuds du cluster.
# scshutdown -g0 -y May 2 10:32:57 phys-schost-1 cl_runtime: WARNING: CMM: Monitoring disabled. root@phys-schost-1# INIT: New run level: 0 The system is coming down. Please wait. System services are now being stopped. /etc/rc0.d/K05initrgm: Calling scswitch -S (evacuate) failfasts already disabled on node 1 Print services already stopped. May 2 10:33:13 phys-schost-1 syslogd: going down on signal 15 The system is down. syncing file systems... done Type any key to continue ATI RAGE SDRAM BIOS P/N GR-xlint.007-4.330 * BIOS Lan-Console 2.0 Copyright (C) 1999-2001 Intel Corporation MAC ADDR: 00 02 47 31 38 3C AMIBIOS (C)1985-2002 American Megatrends Inc., Copyright 1996-2002 Intel Corporation SCB20.86B.1064.P18.0208191106 SCB2 Production BIOS Version 2.08 BIOS Build 1064 2 X Intel(R) Pentium(R) III CPU family 1400MHz Testing system memory, memory size=2048MB 2048MB Extended Memory Passed 512K L2 Cache SRAM Passed ATAPI CD-ROM SAMSUNG CD-ROM SN-124 Press <F2> to enter SETUP, <F12> Network Adaptec AIC-7899 SCSI BIOS v2.57S4 (c) 2000 Adaptec, Inc. All Rights Reserved. Press <Ctrl><A> for SCSISelect(TM) Utility! Ch B, SCSI ID: 0 SEAGATE ST336605LC 160 SCSI ID: 1 SEAGATE ST336605LC 160 SCSI ID: 6 ESG-SHV SCA HSBP M18 ASYN Ch A, SCSI ID: 2 SUN StorEdge 3310 160 SCSI ID: 3 SUN StorEdge 3310 160 AMIBIOS (C)1985-2002 American Megatrends Inc., Copyright 1996-2002 Intel Corporation SCB20.86B.1064.P18.0208191106 SCB2 Production BIOS Version 2.08 BIOS Build 1064 2 X Intel(R) Pentium(R) III CPU family 1400MHz Testing system memory, memory size=2048MB 2048MB Extended Memory Passed 512K L2 Cache SRAM Passed ATAPI CD-ROM SAMSUNG CD-ROM SN-124 SunOS - Intel Platform Edition Primary Boot Subsystem, vsn 2.0 Current Disk Partition Information Part# Status Type Start Length ================================================ 1 Active X86 BOOT 2428 21852 2 SOLARIS 24280 71662420 3 <unused> 4 <unused> Please select the partition you wish to boot: * * Solaris DCB loading /solaris/boot.bin SunOS Secondary Boot version 3.00 Solaris Intel Platform Edition Booting System Autobooting from bootpath: /pci@0,0/pci8086,2545@3/pci8086,1460@1d/ pci8086,341a@7,1/sd@0,0:a If the system hardware has changed, or to boot from a different device, interrupt the autoboot process by pressing ESC. Press ESCape to interrupt autoboot in 2 seconds. Initializing system Please wait... Warning: Resource Conflict - both devices are added NON-ACPI device: ISY0050 Port: 3F0-3F5, 3F7; IRQ: 6; DMA: 2 ACPI device: ISY0050 Port: 3F2-3F3, 3F4-3F5, 3F7; IRQ: 6; DMA: 2 <<< Current Boot Parameters >>> Boot path: /pci@0,0/pci8086,2545@3/pci8086,1460@1d/pci8086,341a@7,1/ sd@0,0:a Boot args: Type b [file-name] [boot-flags] <ENTER> to boot with options or i <ENTER> to enter boot interpreter or <ENTER> to boot with defaults <<< timeout in 5 seconds >>> Select (b)oot or (i)nterpreter: b Size: 275683 + 22092 + 150244 Bytes /platform/i86pc/kernel/unix loaded - 0xac000 bytes used SunOS Release 5.9 Version Generic_112234-07 32-bit Copyright 1983-2003 Sun Microsystems, Inc. All rights reserved. Use is subject to license terms. configuring IPv4 interfaces: e1000g2. Hostname: phys-schost-1 Booting as part of a cluster NOTICE: CMM: Node phys-schost-1 (nodeid = 1) with votecount = 1 added. NOTICE: CMM: Node phys-schost-2 (nodeid = 2) with votecount = 1 added. NOTICE: CMM: Quorum device 1 (/dev/did/rdsk/d1s2) added; votecount = 1, bitmask of nodes with configured paths = 0x3. NOTICE: clcomm: Adapter e1000g3 constructed NOTICE: clcomm: Path phys-schost-1:e1000g3 - phys-schost-2:e1000g3 being constructed NOTICE: clcomm: Path phys-schost-1:e1000g3 - phys-schost-2:e1000g3 being initiated NOTICE: clcomm: Path phys-schost-1:e1000g3 - phys-schost-2:e1000g3 online NOTICE: clcomm: Adapter e1000g0 constructed NOTICE: clcomm: Path phys-schost-1:e1000g0 - phys-schost-2:e1000g0 being constructed NOTICE: CMM: Node phys-schost-1: attempting to join cluster. NOTICE: clcomm: Path phys-schost-1:e1000g0 - phys-schost-2:e1000g0 being initiated NOTICE: CMM: Quorum device /dev/did/rdsk/d1s2: owner set to node 1. NOTICE: CMM: Cluster has reached quorum. NOTICE: CMM: Node phys-schost-1 (nodeid = 1) is up; new incarnation number = 1068496374. NOTICE: CMM: Node phys-schost-2 (nodeid = 2) is up; new incarnation number = 1068496374. NOTICE: CMM: Cluster members: phys-schost-1 phys-schost-2. NOTICE: CMM: node reconfiguration #1 completed. NOTICE: CMM: Node phys-schost-1: joined cluster. WARNING: mod_installdrv: no major number for rsmrdt ip: joining multicasts failed (18) on clprivnet0 - will use link layer broadcasts for multicast The system is coming up. Please wait. checking ufs filesystems /dev/rdsk/c1t0d0s5: is clean. NOTICE: clcomm: Path phys-schost-1:e1000g0 - phys-schost-2:e1000g0 online NIS domain name is dev.eng.mycompany.com starting rpc services: rpcbind keyserv ypbind done. Setting netmask of e1000g2 to 255.255.255.0 Setting netmask of e1000g3 to 255.255.255.128 Setting netmask of e1000g0 to 255.255.255.128 Setting netmask of clprivnet0 to 255.255.255.0 Setting default IPv4 interface for multicast: add net 224.0/4: gateway phys-schost-1 syslog service starting. obtaining access to all attached disks ***************************************************************************** * * The X-server can not be started on display :0... * ***************************************************************************** volume management starting. Starting Fault Injection Server... The system is ready. phys-schost-1 console login: |