Utilice la orden scswitch(1M) junto con la orden de Solaris shutdown(1M) para detener un nodo individual. Utilice la orden scshutdown únicamente para parar todo el clúster.
Tarea |
Para obtener instrucciones |
---|---|
Parar un nodo del clúster Use scswitch(1M) y shutdown(1M) | |
Iniciar un nodo El nodo debe disponer de una conexión funcional con la interconexión del clúster para pertenecer a éste. | |
Parar y reiniciar (rearrancar) un nodo del clúster Use scswitch y shutdown El nodo debe disponer de una conexión funcional con la interconexión del clúster para pertenecer a éste. | |
Arrancar un nodo de forma que deje de pertenecer al clúster Use scswitch y shutdown , a continuación boot -x o b -x |
No utilice la orden send brk en una consola del clúster para parar un nodo de éste, ya que esta orden no se admite dentro de un clúster.
SPARC: Si el nodo del clúster está ejecutando Oracle Parallel Server/Real Application Clusters, pare todas las instancias de la base de datos.
Para averiguar los procedimientos de parada, consulte la documentación del producto de Oracle Parallel Server/Real Application Clusters.
Conviértase en usuario root en el nodo del clúster que se debe parar.
Pase todos los recursos y los grupos de dispositivos y de recursos del nodo que se va a parar a los otros miembros del clúster.
Escriba la siguiente orden en el nodo que se va a parar:
# scswitch -S -h nodo |
Evacúa todos los servicios de dispositivo y grupos de recursos del nodo especificado.
Especifica el nodo del que se van a retirar todos los grupos de recursos y grupos de dispositivos.
Pare el nodo del clúster.
Escriba la siguiente orden en el nodo que se va a parar:
# shutdown -g0 -y -i0 |
Compruebe que el nodo del clúster aparezca en el indicador ok o en el indicador Seleccione (b)arranque o (i)ntérprete de la pantalla Parámetros de arranque actuales.
Si es necesario, apague el nodo.
En el ejemplo siguiente se muestra la salida de la consola correspondiente a parar el nodo phys-schost-1. La opción -g0 establece en cero el período de gracia, -y ofrece una respuesta afirmativa automática a la pregunta de confirmación e -i0 llama al nivel de ejecución 0 (cero). En las consolas de los otros nodos del clúster aparecen mensajes de parada de este nodo.
# scswitch -S -h phys-schost-1 # shutdown -g0 -y -i0 Wed Mar 10 13:47:32 phys-schost-1 cl_runtime: WARNING: CMM monitoring disabled. phys-schost-1# INIT: New run level: 0 The system is coming down. Please wait. Notice: rgmd is being stopped. Notice: rpc.pmfd is being stopped. Notice: rpc.fed is being stopped. umount: /global/.devices/node@1 busy umount: /global/phys-schost-1 busy The system is down. syncing file systems... done Program terminated ok |
En el ejemplo siguiente se muestra la salida de la consola correspondiente a parar el nodo phys-schost-1>. La opción -g0 establece en cero el período de gracia, -y ofrece una respuesta afirmativa automática a la pregunta de confirmación e -i0 llama al nivel de ejecución 0 (cero). En las consolas de los otros nodos del clúster aparecen mensajes de parada de este nodo.
# scswitch -S -h phys-schost-1 # shutdown -g0 -y -i0 Shutdown started. Wed Mar 10 13:47:32 PST 2004 Changing to init state 0 - please wait Broadcast Message from root (console) on phys-schost-1 Wed Mar 10 13:47:32... THE SYSTEM phys-schost-1 IS BEING SHUT DOWN NOW ! ! ! Log off now or risk your files being damaged phys-schost-1# INIT: New run level: 0 The system is coming down. Please wait. System services are now being stopped. /etc/rc0.d/K05initrgm: Calling scswitch -S (evacuate) failfasts disabled on node 1 Print services already stopped. Mar 10 13:47:44 phys-schost-1 syslogd: going down on signal 15 umount: /global/.devices/node@2 busy umount: /global/.devices/node@1 busy The system is down. syncing file systems... done WARNING: CMM: Node being shut down. Type any key to continue |
Consulte Cómo arrancar un nodo del clúster para rearrancar un nodo del clúster detenido.
El inicio de un nodo del clúster puede quedar afectado por la configuración del quórum. En un clúster de dos nodos, debe disponer de un dispositivo del quórum configurado de tal modo que la cuenta total del quórum para el clúster sea tres. Deberá tener un quórum de uno por cada nodo y uno adicional por el dispositivo de quórum. En esta situación, si se para el primer nodo, el segundo sigue teniendo quórum y funciona como miembro único del clúster. Para que el primer nodo vuelva al clúster como nodo de éste, el segundo nodo debe estar en marcha y activo. El total del quórum requerido del clúster (dos) debe estar presente.
Para iniciar un nodo del clúster que ha sido parado, arranque el nodo.
SPARC:
ok boot |
x86:
<<< Parámetros de arranque actuales >>> Ruta de arranque: /pci@0,0/pci8086,2545@3/pci8086,1460@1d/pci8086,341a@7,1/ sd@0,0:a Argumentos de arranque: Escriba b [nombre-archivo] [indicadores-arranque] <INTRO> arrancar con opciones o i <INTRO> introducir el intérprete de arranque o <INTRO> arrancar con los valores predeterminados <<< tiempo de espera sobrepasado en 5 segundos >>> Seleccione (b)arranque o (i)ntérprete: b -x |
El nodo debe disponer de una conexión funcional con la interconexión del clúster para pertenecer a éste.
Compruebe que el nodo haya arrancado sin errores y se encuentre en línea.
La orden scstat informa del estado de un nodo.
# scstat -n |
Si esto llegara a suceder, es posible que Sun Cluster no pueda reiniciarse en ese nodo. Si surge este problema, consulteCómo reparar un sistema de archivos /var completo.
En el ejemplo siguiente se muestra la salida de la consola correspondiente a arrancar el nodo phys-schost-1 en el clúster.
ok boot Rebooting with command: boot ... Hostname: phys-schost-1 Booting as part of a cluster ... NOTICE: Node phys-schost-1: attempting to join cluster ... NOTICE: Node phys-schost-1: joined cluster ... The system is coming up. Please wait. checking ufs filesystems ... reservation program successfully exiting Print services started. volume management starting. The system is ready. phys-schost-1 console login: |
En el ejemplo siguiente se muestra la salida de la consola correspondiente a arrancar el nodo phys-schost-1 en el clúster.
<<< Parámetros de arranque actuales>>> Ruta de arranque: /pci@0,0/pci8086,2545@3/pci8086,1460@1d/pci8086,341a@7,1/sd@0,0:a Argumentos de arranque: Escriba b [nombre_archivo] [indicadores_arranque] <INTRO> arrancar con opciones o i <INTRO> introducir el intérprete de arranque o <INTRO> arrancar con los valores predeterminados <<< tiempo de espera sobrepasado en 5 segundos >>> Seleccione (b)arranque o (i)ntérprete: Size: 276915 + 22156 + 150372 Bytes /platform/i86pc/kernel/unix loaded - 0xac000 bytes used SunOS Release 5.9 Version on81-feature-patch:08/30/2003 32-bit Copyright 1983-2003 Sun Microsystems, Inc. All rights reserved. Use is subject to license terms. configuring IPv4 interfaces: e1000g2. Hostname: phys-schost-1 Booting as part of a cluster NOTICE: CMM: Node phys-schost-1 (nodeid = 1) with votecount = 1 added. NOTICE: CMM: Node phys-schost-2 (nodeid = 2) with votecount = 1 added. NOTICE: CMM: Quorum device 1 (/dev/did/rdsk/d1s2) added; votecount = 1, bitmask of nodes with configured paths = 0x3. WARNING: CMM: Initialization for quorum device /dev/did/rdsk/d1s2 failed with error EACCES. Will retry later. NOTICE: clcomm: Adapter e1000g3 constructed NOTICE: clcomm: Path phys-schost-1:e1000g3 - phys-schost-2:e1000g3 being constructed NOTICE: clcomm: Path phys-schost-1:e1000g3 - phys-schost-2:e1000g3 being initiated NOTICE: clcomm: Path phys-schost-1:e1000g3 - phys-schost-2:e1000g3 online NOTICE: clcomm: Adapter e1000g0 constructed NOTICE: clcomm: Path phys-schost-1:e1000g0 - phys-schost-2:e1000g0 being constructed NOTICE: CMM: Node phys-schost-1: attempting to join cluster. WARNING: CMM: Reading reservation keys from quorum device /dev/did/rdsk/d1s2 failed with error 2. NOTICE: CMM: Cluster has reached quorum. NOTICE: CMM: Node phys-schost-1 (nodeid = 1) is up; new incarnation number = 1068503958. NOTICE: CMM: Node phys-schost-2 (nodeid = 2) is up; new incarnation number = 1068496374. NOTICE: CMM: Cluster members: phys-schost-1 phys-schost-2. NOTICE: CMM: node reconfiguration #3 completed. NOTICE: CMM: Node phys-schost-1: joined cluster. NOTICE: clcomm: Path phys-schost-1:e1000g0 - phys-schost-2:e1000g0 being initiated NOTICE: clcomm: Path phys-schost-1:e1000g0 - phys-schost-2:e1000g0 online NOTICE: CMM: Retry of initialization for quorum device /dev/did/rdsk/d1s2 was successful. WARNING: mod_installdrv: no major number for rsmrdt ip: joining multicasts failed (18) on clprivnet0 - will use link layer broadcasts for multicast The system is coming up. Please wait. checking ufs filesystems /dev/rdsk/c1t0d0s5: is clean. NIS domain name is dev.eng.mycompany.com starting rpc services: rpcbind keyserv ypbind done. Setting netmask of e1000g2 to 255.255.255.0 Setting netmask of e1000g3 to 255.255.255.128 Setting netmask of e1000g0 to 255.255.255.128 Setting netmask of clprivnet0 to 255.255.255.0 Setting default IPv4 interface for multicast: add net 224.0/4: gateway phys-schost-1 syslog service starting. obtaining access to all attached disks ***************************************************************************** * * The X-server can not be started on display :0... * ***************************************************************************** volume management starting. Starting Fault Injection Server... The system is ready. phys-schost-1 console login: |
SPARC: Si el nodo del clúster está ejecutando Oracle Parallel Server/Real Application Clusters, pare todas las instancias de la base de datos.
Para averiguar los procedimientos de parada, consulte la documentación del producto de Oracle Parallel Server/Real Application Clusters.
Conviértase en usuario root en el nodo del clúster que se debe parar.
Pare el nodo del clúster mediante las órdenes scswitch y shutdown.
Escriba estas órdenes en el nodo que se debe parar. La opción -i 6 de la orden shutdown hace que el nodo rearranque después de pararse.
# scswitch -S -h nodo # shutdown -g0 -y -i6 |
Los nodos deben disponer de una conexión funcional con la interconexión del clúster para pertenecer a éste.
Compruebe que el nodo haya arrancado sin errores y se encuentre en línea.
# scstat -n |
En el ejemplo siguiente se muestra la salida de la consola correspondiente a la acción de rearrancar el nodo phys-schost-1. Los mensajes correspondientes a este nodo, como la notificación de parada y la de rearranque, aparecen en las consolas de los otros nodos del clúster.
# scswitch -S -h phys-schost-1 # shutdown -g0 -y -i6 Shutdown started. Wed Mar 10 13:47:32 phys-schost-1 cl_runtime: WARNING: CMM monitoring disabled. phys-schost-1# INIT: New run level: 6 The system is coming down. Please wait. System services are now being stopped. Notice: rgmd is being stopped. Notice: rpc.pmfd is being stopped. Notice: rpc.fed is being stopped. umount: /global/.devices/node@1 busy umount: /global/phys-schost-1 busy The system is down. syncing file systems... done rebooting... Resetting ... ,,, Sun Ultra 1 SBus (UltraSPARC 143MHz), No Keyboard OpenBoot 3.11, 128 MB memory installed, Serial #5932401. Ethernet address 8:8:20:99:ab:77, Host ID: 8899ab77. ... Rebooting with command: boot ... Hostname: phys-schost-1 Booting as part of a cluster ... NOTICE: Node phys-schost-1: attempting to join cluster ... NOTICE: Node phys-schost-1: joined cluster ... The system is coming up. Please wait. The system is ready. phys-schost-1 console login: |
En el ejemplo siguiente se muestra la salida de la consola correspondiente a la acción de rearrancar el nodo phys-schost-1. Los mensajes correspondientes a este nodo, como la notificación de parada y la de rearranque, aparecen en las consolas de los otros nodos del clúster.
# scswitch -S -h phys-schost-1 # shutdown -g0 -y -i6 Shutdown started. Wed Mar 10 13:47:32 PST 2004 Changing to init state 6 - please wait Broadcast Message from root (console) on phys-schost-1 Wed Mar 10 13:47:32... THE SYSTEM phys-schost-1 IS BEING SHUT DOWN NOW ! ! ! Log off now or risk your files being damaged phys-schost-1# INIT: New run level: 6 The system is coming down. Please wait. System services are now being stopped. /etc/rc0.d/K05initrgm: Calling scswitch -S (evacuate) Print services already stopped. Mar 10 13:47:44 phys-schost-1 syslogd: going down on signal 15 umount: /global/.devices/node@2 busy umount: /global/.devices/node@1 busy The system is down. syncing file systems... done WARNING: CMM: Node being shut down. rebooting... ATI RAGE SDRAM BIOS P/N GR-xlint.007-4.330 * BIOS Lan-Console 2.0 Copyright (C) 1999-2001 Intel Corporation MAC ADDR: 00 02 47 31 38 3C AMIBIOS (C)1985-2002 American Megatrends Inc., Copyright 1996-2002 Intel Corporation SCB20.86B.1064.P18.0208191106 SCB2 Production BIOS Version 2.08 BIOS Build 1064 2 X Intel(R) Pentium(R) III CPU family 1400MHz Testing system memory, memory size=2048MB 2048MB Extended Memory Passed 512K L2 Cache SRAM Passed ATAPI CD-ROM SAMSUNG CD-ROM SN-124 Press <F2> to enter SETUP, <F12> Network Adaptec AIC-7899 SCSI BIOS v2.57S4 (c) 2000 Adaptec, Inc. All Rights Reserved. Press <Ctrl><A> for SCSISelect(TM) Utility! Ch B, SCSI ID: 0 SEAGATE ST336605LC 160 SCSI ID: 1 SEAGATE ST336605LC 160 SCSI ID: 6 ESG-SHV SCA HSBP M18 ASYN Ch A, SCSI ID: 2 SUN StorEdge 3310 160 SCSI ID: 3 SUN StorEdge 3310 160 AMIBIOS (C)1985-2002 American Megatrends Inc., Copyright 1996-2002 Intel Corporation SCB20.86B.1064.P18.0208191106 SCB2 Production BIOS Version 2.08 BIOS Build 1064 2 X Intel(R) Pentium(R) III CPU family 1400MHz Testing system memory, memory size=2048MB 2048MB Extended Memory Passed 512K L2 Cache SRAM Passed ATAPI CD-ROM SAMSUNG CD-ROM SN-124 SunOS - Intel Platform Edition Primary Boot Subsystem, vsn 2.0 Current Disk Partition Information Part# Status Type Start Length ================================================ 1 Active X86 BOOT 2428 21852 2 SOLARIS 24280 71662420 3 <unused> 4 <unused> Please select the partition you wish to boot: * * Solaris DCB loading /solaris/boot.bin SunOS Secondary Boot version 3.00 Solaris Intel Platform Edition Booting System Autobooting from bootpath: /pci@0,0/pci8086,2545@3/pci8086,1460@1d/ pci8086,341a@7,1/sd@0,0:a If the system hardware has changed, or to boot from a different device, interrupt the autoboot process by pressing ESC. Press ESCape to interrupt autoboot in 2 seconds. Initializing system Please wait... Warning: Resource Conflict - both devices are added NON-ACPI device: ISY0050 Port: 3F0-3F5, 3F7; IRQ: 6; DMA: 2 ACPI device: ISY0050 Port: 3F2-3F3, 3F4-3F5, 3F7; IRQ: 6; DMA: 2 <<< Parámetros de arranque actuales>>> Ruta de arranque: /pci@0,0/pci8086,2545@3/pci8086,1460@1d/pci8086,341a@7,1/sd@0,0:a Argumentos de arranque: Escriba b [nombre_archivo] [indicadores_arranque] <INTRO> arrancar con opciones o i <INTRO> introducir el intérprete de arranque o <INTRO> arrancar con los valores predeterminados <<< tiempo de espera sobrepasado en 5 segundos >>> Seleccione (b)arranque o (i)ntérprete: Size: 276915 + 22156 + 150372 Bytes /platform/i86pc/kernel/unix loaded - 0xac000 bytes used SunOS Release 5.9 Version on81-feature-patch:08/30/2003 32-bit Copyright 1983-2003 Sun Microsystems, Inc. All rights reserved. Use is subject to license terms. configuring IPv4 interfaces: e1000g2. Hostname: phys-schost-1 Booting as part of a cluster NOTICE: CMM: Node phys-schost-1 (nodeid = 1) with votecount = 1 added. NOTICE: CMM: Node phys-schost-2 (nodeid = 2) with votecount = 1 added. NOTICE: CMM: Quorum device 1 (/dev/did/rdsk/d1s2) added; votecount = 1, bitmask of nodes with configured paths = 0x3. WARNING: CMM: Initialization for quorum device /dev/did/rdsk/d1s2 failed with error EACCES. Will retry later. NOTICE: clcomm: Adapter e1000g3 constructed NOTICE: clcomm: Path phys-schost-1:e1000g3 - phys-schost-2:e1000g3 being constructed NOTICE: clcomm: Path phys-schost-1:e1000g3 - phys-schost-2:e1000g3 being initiated NOTICE: clcomm: Path phys-schost-1:e1000g3 - phys-schost-2:e1000g3 online NOTICE: clcomm: Adapter e1000g0 constructed NOTICE: clcomm: Path phys-schost-1:e1000g0 - phys-schost-2:e1000g0 being constructed NOTICE: CMM: Node phys-schost-1: attempting to join cluster. WARNING: CMM: Reading reservation keys from quorum device /dev/did/rdsk/d1s2 failed with error 2. NOTICE: CMM: Cluster has reached quorum. NOTICE: CMM: Node phys-schost-1 (nodeid = 1) is up; new incarnation number = 1068503958. NOTICE: CMM: Node phys-schost-2 (nodeid = 2) is up; new incarnation number = 1068496374. NOTICE: CMM: Cluster members: phys-schost-1 phys-schost-2. NOTICE: CMM: node reconfiguration #3 completed. NOTICE: CMM: Node phys-schost-1: joined cluster. NOTICE: clcomm: Path phys-schost-1:e1000g0 - phys-schost-2:e1000g0 being initiated NOTICE: clcomm: Path phys-schost-1:e1000g0 - phys-schost-2:e1000g0 online NOTICE: CMM: Retry of initialization for quorum device /dev/did/rdsk/d1s2 was successful. WARNING: mod_installdrv: no major number for rsmrdt ip: joining multicasts failed (18) on clprivnet0 - will use link layer broadcasts for multicast The system is coming up. Please wait. checking ufs filesystems /dev/rdsk/c1t0d0s5: is clean. NIS domain name is dev.eng.mycompany.com starting rpc services: rpcbind keyserv ypbind done. Setting netmask of e1000g2 to 255.255.255.0 Setting netmask of e1000g3 to 255.255.255.128 Setting netmask of e1000g0 to 255.255.255.128 Setting netmask of clprivnet0 to 255.255.255.0 Setting default IPv4 interface for multicast: add net 224.0/4: gateway phys-schost-1 syslog service starting. obtaining access to all attached disks ***************************************************************************** * * The X-server can not be started on display :0... * ***************************************************************************** volume management starting. Starting Fault Injection Server... The system is ready. phys-schost-1 console login: |
Es posible arrancar un nodo de forma que no pertenezca al clúster; es decir, en modo sin clúster. Este modo se utiliza para instalar software o efectuar determinados procedimientos de administración, como instalar modificaciones en el nodo.
Conviértase en usuario root en el nodo que se debe iniciar en el modo sin clúster.
Pare el nodo mediante las órdenes scswitch y shutdown.
# scswitch -S -h nodo # shutdown -g0 -y -i0 |
Compruebe que el nodo aparezca en el indicador ok o en el Select (b)oot or (i)nterpreter en la pantalla Parámetros de arranque actuales.
Arranque el nodo en el modo sin clúster con la orden boot(1M) o b con la opción -x.
SPARC:
ok boot -x |
x86:
<<< Parámetros de arranque actuales >>> Ruta de arranque: /pci@0,0/pci8086,2545@3/pci8086,1460@1d/pci8086,341a@7,1/ sd@0,0:a Argumentos de arranque: Escriba b [nombre-archivo] [indicadores-arranque] <INTRO> arrancar con opciones o i <INTRO> introducir el intérprete de arranque o <INTRO> arrancar con los valores predeterminados <<< tiempo de espera sobrepasado en 5 segundos >>> Seleccione (b)arranque o (i)ntérprete: b -x |
En el ejemplo siguiente se muestra la salida de consola obtenida al parar el nodo phys-schost-1 y reiniciarlo en modo sin clúster. La opción -g0 establece en cero el período de gracia, -y ofrece una respuesta afirmativa automática a la pregunta de confirmación e -i0 llama al nivel de ejecución 0 (cero). En las consolas de los otros nodos del clúster aparecen mensajes de parada de este nodo.
# scswitch -S -h phys-schost-1 # shutdown -g0 -y -i0 Shutdown started. Wed Mar 10 13:47:32 phys-schost-1 cl_runtime: WARNING: CMM monitoring disabled. phys-schost-1# ... rg_name = schost-sa-1 ... offline node = phys-schost-2 ... num of node = 0 ... phys-schost-1# INIT: New run level: 0 The system is coming down. Please wait. System services are now being stopped. Print services stopped. syslogd: going down on signal 15 ... The system is down. syncing file systems... done WARNING: node phys-schost-1 is being shut down. Program terminated ok boot -x ... Not booting as part of cluster ... The system is ready. phys-schost-1 console login: |
En el ejemplo siguiente se muestra la salida de consola obtenida al parar el nodo phys-schost-1 y reiniciarlo en modo sin clúster. La opción -g0 establece en cero el período de gracia, -y ofrece una respuesta afirmativa automática a la pregunta de confirmación e -i0 llama al nivel de ejecución 0 (cero). En las consolas de los otros nodos del clúster aparecen mensajes de parada de este nodo.
# scswitch -S -h phys-schost-1 # shutdown -g0 -y -i0 Shutdown started. Wed Mar 10 13:47:32 PST 2004 phys-schost-1# INIT: New run level: 0 The system is coming down. Please wait. System services are now being stopped. Print services already stopped. Mar 10 13:47:44 phys-schost-1 syslogd: going down on signal 15 ... The system is down. syncing file systems... done WARNING: CMM: Node being shut down. Type any key to continue ATI RAGE SDRAM BIOS P/N GR-xlint.007-4.330 * BIOS Lan-Console 2.0 Copyright (C) 1999-2001 Intel Corporation MAC ADDR: 00 02 47 31 38 3C AMIBIOS (C)1985-2002 American Megatrends Inc., Copyright 1996-2002 Intel Corporation SCB20.86B.1064.P18.0208191106 SCB2 Production BIOS Version 2.08 BIOS Build 1064 2 X Intel(R) Pentium(R) III CPU family 1400MHz Testing system memory, memory size=2048MB 2048MB Extended Memory Passed 512K L2 Cache SRAM Passed ATAPI CD-ROM SAMSUNG CD-ROM SN-124 Press <F2> to enter SETUP, <F12> Network Adaptec AIC-7899 SCSI BIOS v2.57S4 (c) 2000 Adaptec, Inc. All Rights Reserved. Press <Ctrl><A> for SCSISelect(TM) Utility! Ch B, SCSI ID: 0 SEAGATE ST336605LC 160 SCSI ID: 1 SEAGATE ST336605LC 160 SCSI ID: 6 ESG-SHV SCA HSBP M18 ASYN Ch A, SCSI ID: 2 SUN StorEdge 3310 160 SCSI ID: 3 SUN StorEdge 3310 160 AMIBIOS (C)1985-2002 American Megatrends Inc., Copyright 1996-2002 Intel Corporation SCB20.86B.1064.P18.0208191106 SCB2 Production BIOS Version 2.08 BIOS Build 1064 2 X Intel(R) Pentium(R) III CPU family 1400MHz Testing system memory, memory size=2048MB 2048MB Extended Memory Passed 512K L2 Cache SRAM Passed ATAPI CD-ROM SAMSUNG CD-ROM SN-124 SunOS - Intel Platform Edition Primary Boot Subsystem, vsn 2.0 Current Disk Partition Information Part# Status Type Start Length ================================================ 1 Active X86 BOOT 2428 21852 2 SOLARIS 24280 71662420 3 <unused> 4 <unused> Please select the partition you wish to boot: * * Solaris DCB loading /solaris/boot.bin SunOS Secondary Boot version 3.00 Solaris Intel Platform Edition Booting System Autobooting from bootpath: /pci@0,0/pci8086,2545@3/pci8086,1460@1d/ pci8086,341a@7,1/sd@0,0:a If the system hardware has changed, or to boot from a different device, interrupt the autoboot process by pressing ESC. Press ESCape to interrupt autoboot in 2 seconds. Initializing system Please wait... Warning: Resource Conflict - both devices are added NON-ACPI device: ISY0050 Port: 3F0-3F5, 3F7; IRQ: 6; DMA: 2 ACPI device: ISY0050 Port: 3F2-3F3, 3F4-3F5, 3F7; IRQ: 6; DMA: 2 <<< Parámetros de arranque actuales >>> Ruta de arranque: /pci@0,0/pci8086,2545@3/pci8086,1460@1d/pci8086,341a@7,1/ sd@0,0:a Argumentos de arranque: Escriba b [nombre-archivo] [indicadores-arranque] <INTRO> arrancar con opciones o i <INTRO> introducir el intérprete de arranque o <INTRO> arrancar con los valores predeterminados <<< tiempo de espera sobrepasado en 5 segundos >>> Seleccione (b)arranque o (i)ntérprete: b -x ... Not booting as part of cluster ... The system is ready. phys-schost-1 console login: |