sccheck(1M) コマンドは、クラスタファイルシステムとその広域マウントポイントに構成エラーがないかどうか /etc/vfstab ファイルを確認します。
sccheck は、デバイスやボリューム管理コンポーネントに影響を及ぼすような変更をクラスタ構成に加えた後で実行してください。
次の例は、クラスタ sunclusterのノード phys-schost-2 にマウントポイント /global/schost-1 がないことを示しています。 レポートが出力ディレクトリ /var/cluster/sccheck/myReports/ に送信されます。
# sccheck -v1 -h phys-schost-1,phys-schost-2 -o /var/cluster/sccheck/myReports sccheck: Requesting explorer data and node report from phys-schost-1. sccheck: Requesting explorer data and node report from phys-schost-2. sccheck: phys-schost-1: Explorer finished. sccheck: phys-schost-1: Starting single-node checks. sccheck: phys-schost-1: Single-node checks finished. sccheck: phys-schost-2: Explorer finished. sccheck: phys-schost-2: Starting single-node checks. sccheck: phys-schost-2: Single-node checks finished. sccheck: Starting multi-node checks. sccheck: Multi-node checks finished. sccheck: One or more checks failed. sccheck: The greatest severity of all check failures was 3 (HIGH). sccheck: Reports are in /var/cluster/sccheck/myReports. # # cat /var/cluster/sccheck/myReports/sccheck-results.suncluster.txt ... =================================================== = ANALYSIS DETAILS = =================================================== ------------------------------------ CHECK ID : 3065 SEVERITY : HIGH FAILURE : Global filesystem /etc/vfstab entries are not consistent across all Sun Cluster 3.x nodes. ANALYSIS : The global filesystem /etc/vfstab entries are not consistent across all nodes in this cluster. Analysis indicates: FileSystem '/global/phys-schost-1' is on 'phys-schost-1' but missing from 'phys-schost-2'. RECOMMEND: Ensure each node has the correct /etc/vfstab entry for the filesystem(s) in question. ... # # cat /var/cluster/sccheck/myReports/sccheck-results.phys-schost-1.txt ... =================================================== = ANALYSIS DETAILS = =================================================== ------------------------------------ CHECK ID : 1398 SEVERITY : HIGH FAILURE : An unsupported server is being used as a Sun Cluster 3.x node. ANALYSIS : This server may not been qualified to be used as a Sun Cluster 3.x node. Only servers that have been qualified with Sun Cluster 3.x are supported as Sun Cluster 3.x nodes. RECOMMEND: Because the list of supported servers is always being updated, check with your Sun Microsystems representative to get the latest information on what servers are currently supported and only use a server that is supported with Sun Cluster 3.x. ... # |