Dieses Beispiel zeigt das Entfernen eines Knotens (phys-schost-2) aus einer im raw-Modus betriebenen Plattengerätegruppe. Alle Befehle werden von einem anderen Knoten im Cluster durchgeführt (phys-schost-1).
[Identify the disk device groups connected to the node being removed:] phys-schost-1# scconf -pvv | grep phys-schost-2 | grep "Device group node list" (dsk/d4) Device group node list: phys-schost-2 (dsk/d2) Device group node list: phys-schost-1, phys-schost-2 (dsk/d1) Device group node list: phys-schost-1, phys-schost-2 [Identify the raw disk device groups:] phys-schost-1# scconf -pvv | grep Disk (dsk/d4) Device group type: Local_Disk (dsk/d8) Device group type: Local_Disk [Disable the localonly flag for each local disk on the node:] phys-schost-1# scconf -c -D name=dsk/d4,localonly=false [Verify that the localonly flag is disabled:] phys-schost-1# scconf -pvv | grep Disk (dsk/d4) Device group type: Disk (dsk/d8) Device group type: Local_Disk [Remove the node from all raw disk device groups:] phys-schost-1# scconf -r -D name=dsk/d4,nodelist=phys-schost-2 phys-schost-1# scconf -r -D name=dsk/d2,nodelist=phys-schost-2 phys-schost-1# scconf -r -D name=dsk/d1,nodelist=phys-schost-2 |