test

Sun Cluster 系統管理指南 (適用於 Solaris 作業系統)

關閉與啟動單一叢集節點

注意 –

將 scswitch(1M) 指令與 Solaris shutdown(1M) 指令配合使用來關閉個別節點。唯有在關閉整個叢集時，才使用 scshutdown 指令。

表 3–2 對應作業：關閉與啟動叢集節點

工作 

相關說明 

停止叢集節點 

    － 使用 scswitch(1M) 與 shutdown(1M)

如何關閉叢集節點

啟動節點 

節點和叢集互連之間必須有運轉中的連線，才能夠成為叢集成員。 

如何啟動叢集節點

停止並重新啟動 (重新開機) 叢集節點 

    - 使用 scswitch 與 shutdown

節點和叢集互連必須有運轉中的連線，才能夠成為叢集成員。 

如何重新啟動叢集節點

啟動節點，以讓此節點不參與成為叢集成員 

    － 使用 scswitch 與 shutdown，然後使用 boot -x 或 b -x

如何以非叢集模式啟動叢集節點

如何關閉叢集節點

注意 – 注意 –

請勿在叢集主控台上使用 send brk 來關閉叢集節點。叢集中並不支援這個指令。

  1. SPARC：如果叢集正在執行 Oracle Parallel Server or Oracle Real Application Clusters，請關閉所有資料庫實例。

    請參閱 Oracle Parallel Server or Oracle Real Application Clusters 產品說明文件，以取得關機程序的說明。

  2. 成為要關機之叢集節點的超級使用者。

  3. 將所有的資源群組、資源以及裝置群組，從要關閉的節點切換到其他叢集成員。

    在要關閉的節點上，鍵入下列指令。


    # scswitch -S -h node

    -S

    從指定的節點撤出所有的裝置服務與資源群組。

    -h node

    指定您要用來轉換資源群組及裝置群組的節點。

  4. 關閉叢集節點。

    在要關閉的節點上，鍵入下列指令。


    # shutdown -g0 -y -i0

  5. 在 [目前的啟動參數] 畫面上，請確認叢集節點顯示 ok 提示符號或 Select (b)oot or (i)nterpreter 提示符號。

  6. 必要時請關閉節點電源。

SPARC: 範例—關閉叢集節點

以下範例顯示關閉 phys-schost-1 節點時的主控台輸出。-g0 選項將寬限期設成零，-y 提供自動的 yes 回應，以確認問題，以及 -i0 啟動執行層次 0 (零)。這個節點的關閉訊息出現在叢集中另一個節點的主控台上。


# scswitch -S -h phys-schost-1
# shutdown -g0 -y -i0
Wed Mar 10 13:47:32 phys-schost-1 cl_runtime:
WARNING: CMM monitoring disabled.
phys-schost-1# 
INIT: New run level: 0
The system is coming down.  Please wait.
Notice: rgmd is being stopped.
Notice: rpc.pmfd is being stopped.
Notice: rpc.fed is being stopped.
umount: /global/.devices/node@1 busy
umount: /global/phys-schost-1 busy
The system is down.
syncing file systems... done
Program terminated
ok

x86: 範例—關閉叢集節點

以下範例顯示關閉 phys-schost-1 節點時的主控台輸出。-g0 選項將寬限期設成零，-y 提供自動的 yes 回應，以確認問題，以及 -i0 啟動執行層次 0 (零)。這個節點的關閉訊息出現在叢集中另一個節點的主控台上。


# scswitch -S -h phys-schost-1
# shutdown -g0 -y -i0
Shutdown started.    Wed Mar 10 13:47:32 PST 2004

Changing to init state 0 - please wait
Broadcast Message from root (console) on phys-schost-1 Wed Mar 10 13:47:32... 
THE SYSTEM phys-schost-1 IS BEING SHUT DOWN NOW ! ! !
Log off now or risk your files being damaged

phys-schost-1#
INIT: New run level: 0
The system is coming down.  Please wait.
System services are now being stopped.
/etc/rc0.d/K05initrgm: Calling scswitch -S (evacuate)
failfasts disabled on node 1
Print services already stopped.
Mar 10 13:47:44 phys-schost-1 syslogd: going down on signal 15
umount: /global/.devices/node@2 busy
umount: /global/.devices/node@1 busy
The system is down.
syncing file systems... done
WARNING: CMM: Node being shut down.
Type any key to continue

下一步

請參閱如何啟動叢集節點 以重新啟動已關閉的叢集節點。

如何啟動叢集節點

如果您計劃關閉或重新啟動叢集中其他的使用中節點，請至少等待至您正啟動的節點已到達登入提示。否則，該節點將不能用於接管來自您關閉或重新啟動的叢集中其他節點的服務。

注意 –

啟動叢集節點會受到法定數目配置的影響。在擁有兩個節點的叢集中，您必須配置法定裝置以使叢集的法定總數為三。每一個節點都應有一個法定計數，以及一個法定計數用於法定裝置。在這個情況下，如果第一個節點關閉，第二個節點會使法定裝置繼續當作單獨的叢集成員執行。要使第一個節點回到叢集中成為叢集節點，則第二個節點必須啟動並執行。必要的叢集法定計數 (二) 必須存在。

  1. 若要啟動已經關閉的叢集節點，請啟動節點。

    • SPARC：


      ok boot

    • x86：


                            <<< Current Boot Parameters >>>
Boot path: /pci@0,0/pci8086,2545@3/pci8086,1460@1d/pci8086,341a@7,1/
sd@0,0:a
Boot args:

Type    b [file-name] [boot-flags] <ENTER>  to boot with options
or      i <ENTER>                           to enter boot interpreter
or      <ENTER>                             to boot with defaults

                  <<< timeout in 5 seconds >>>
Select (b)oot or (i)nterpreter: b

    當叢集元件啟動時，訊息會出現在啟動節點的主控台上。

    注意 –

    叢集節點和叢集互連之間必須有運轉中的連線，才能夠成為叢集成員。

  2. 確認節點啟動成功而且是在線上狀態。

    scstat 指令報告節點的狀態。


     # scstat -n

    注意 –

    如果叢集節點的 /var 檔案系統已滿，Sun Cluster 可能無法在該節點上重新啟動。如果發生此問題，請參閱如何修復整個 /var 檔案系統。

SPARC: 範例—啟動叢集節點

以下範例顯示 phys-schost-1 節點啟動為叢集時的主控台輸出。


ok boot
Rebooting with command: boot 
...
Hostname: phys-schost-1
Booting as part of a cluster
...
NOTICE: Node phys-schost-1: attempting to join cluster
...
NOTICE: Node phys-schost-1: joined cluster
...
The system is coming up.  Please wait.
checking ufs filesystems
...
reservation program successfully exiting
Print services started.
volume management starting.
The system is ready.
phys-schost-1 console login:

x86: 範例—啟動叢集節點

以下範例顯示 phys-schost-1 節點啟動為叢集時的主控台輸出。


                     <<< Current Boot Parameters >>>
Boot path: /pci@0,0/pci8086,2545@3/pci8086,1460@1d/pci8086,341a@7,1/sd@0,0:a
Boot args: 

Type    b [file-name] [boot-flags] <ENTER>   to boot with options
or      i <ENTER>                            to enter boot interpreter
or      <ENTER>                              to boot with defaults

                  <<< timeout in 5 seconds >>>

Select (b)oot or (i)nterpreter: Size: 276915 + 22156 + 150372 Bytes
/platform/i86pc/kernel/unix loaded - 0xac000 bytes used
SunOS Release 5.9 Version on81-feature-patch:08/30/2003 32-bit
Copyright 1983-2003 Sun Microsystems, Inc.  All rights reserved.
Use is subject to license terms.
configuring IPv4 interfaces: e1000g2.
Hostname: phys-schost-1
Booting as part of a cluster
NOTICE: CMM: Node phys-schost-1 (nodeid = 1) with votecount = 1 added.
NOTICE: CMM: Node phys-schost-2 (nodeid = 2) with votecount = 1 added.
NOTICE: CMM: Quorum device 1 (/dev/did/rdsk/d1s2) added; votecount = 1, bitmask
of nodes with configured paths = 0x3.
WARNING: CMM: Initialization for quorum device /dev/did/rdsk/d1s2 failed with
error EACCES. Will retry later.
NOTICE: clcomm: Adapter e1000g3 constructed
NOTICE: clcomm: Path phys-schost-1:e1000g3 - phys-schost-2:e1000g3 being constructed
NOTICE: clcomm: Path phys-schost-1:e1000g3 - phys-schost-2:e1000g3 being initiated
NOTICE: clcomm: Path phys-schost-1:e1000g3 - phys-schost-2:e1000g3 online
NOTICE: clcomm: Adapter e1000g0 constructed
NOTICE: clcomm: Path phys-schost-1:e1000g0 - phys-schost-2:e1000g0 being constructed
NOTICE: CMM: Node phys-schost-1: attempting to join cluster.
WARNING: CMM: Reading reservation keys from quorum device /dev/did/rdsk/d1s2
failed with error 2.
NOTICE: CMM: Cluster has reached quorum.
NOTICE: CMM: Node phys-schost-1 (nodeid = 1) is up; new incarnation number =
1068503958.
NOTICE: CMM: Node phys-schost-2 (nodeid = 2) is up; new incarnation number =
1068496374.
NOTICE: CMM: Cluster members: phys-schost-1 phys-schost-2.
NOTICE: CMM: node reconfiguration #3 completed.
NOTICE: CMM: Node phys-schost-1: joined cluster.
NOTICE: clcomm: Path phys-schost-1:e1000g0 - phys-schost-2:e1000g0 being initiated
NOTICE: clcomm: Path phys-schost-1:e1000g0 - phys-schost-2:e1000g0 online
NOTICE: CMM: Retry of initialization for quorum device /dev/did/rdsk/d1s2 was
successful.
WARNING: mod_installdrv: no major number for rsmrdt
ip: joining multicasts failed (18) on clprivnet0 - will use link layer
broadcasts for multicast
The system is coming up.  Please wait.
checking ufs filesystems
/dev/rdsk/c1t0d0s5: is clean.
NIS domain name is dev.eng.mycompany.com
starting rpc services: rpcbind keyserv ypbind done.
Setting netmask of e1000g2 to 192.168.255.0
Setting netmask of e1000g3 to 192.168.255.128
Setting netmask of e1000g0 to 192.168.255.128
Setting netmask of clprivnet0 to 192.168.255.0
Setting default IPv4 interface for multicast: add net 224.0/4: gateway phys-schost-1
syslog service starting.
obtaining access to all attached disks


*****************************************************************************
*
* The X-server can not be started on display :0...
*
*****************************************************************************
volume management starting.
Starting Fault Injection Server...
The system is ready.

phys-schost-1 console login:

如何重新啟動叢集節點

如果您計劃關閉或重新啟動叢集中其他的作用中節點，請至少等待至您正重新啟動的節點已到達登入提示。否則，該節點將不能用於接管來自您關閉或重新啟動的叢集中其他節點的服務。

  1. SPARC：如果叢集節點正在執行 Oracle Parallel Server or Oracle Real Application Clusters，請關閉所有資料庫實例。

    請參閱 Oracle Parallel Server or Oracle Real Application Clusters 產品說明文件，以取得關機程序的說明。

  2. 成為要關機之叢集節點的超級使用者。

  3. 使用 scswitch 以及 shutdown 指令來關閉叢集節點。

    在要關機的節點上，輸入下列指令。-i 6 選項與 shutdown 指令配合使用可讓節點在關閉後重新啟動。


    # scswitch -S -h node
# shutdown -g0 -y -i6
    注意 –

    叢集節點和叢集互連之間必須有運轉中的連線，才能夠成為叢集成員。

  4. 確認節點啟動成功而且是在線上狀態。


     # scstat -n

SPARC: 範例—重新啟動叢集節點

以下範例顯示重新啟動節點 phys-schost-1 時的主控台輸出。這個節點的訊息，例如關機和啟動通知，會顯示在叢集中其他節點的主控台上。


# scswitch -S -h phys-schost-1
# shutdown -g0 -y -i6
Shutdown started.    Wed Mar 10 13:47:32 phys-schost-1 cl_runtime: 

WARNING: CMM monitoring disabled.
phys-schost-1# 
INIT: New run level: 6
The system is coming down.  Please wait.
System services are now being stopped.
Notice: rgmd is being stopped.
Notice: rpc.pmfd is being stopped.
Notice: rpc.fed is being stopped.
umount: /global/.devices/node@1 busy
umount: /global/phys-schost-1 busy
The system is down.
syncing file systems... done
rebooting...
Resetting ... 
,,,
Sun Ultra 1 SBus (UltraSPARC 143MHz), No Keyboard
OpenBoot 3.11, 128 MB memory installed, Serial #5932401.
Ethernet address 8:8:20:99:ab:77, Host ID: 8899ab77.
...
Rebooting with command: boot
...
Hostname: phys-schost-1
Booting as part of a cluster
...
NOTICE: Node phys-schost-1: attempting to join cluster
...
NOTICE: Node phys-schost-1: joined cluster
...
The system is coming up.  Please wait.
The system is ready.
phys-schost-1 console login:

x86: 範例—重新啟動叢集節點

以下範例顯示重新啟動節點 phys-schost-1 時的主控台輸出。這個節點的訊息，例如關機和啟動通知，會顯示在叢集中其他節點的主控台上。


# scswitch -S -h phys-schost-1
# shutdown -g0 -y -i6
Shutdown started.    Wed Mar 10 13:47:32 PST 2004

Changing to init state 6 - please wait
Broadcast Message from root (console) on phys-schost-1 Wed Mar 10 13:47:32...
THE SYSTEM phys-schost-1 IS BEING SHUT DOWN NOW ! ! !
Log off now or risk your files being damaged

phys-schost-1# 
INIT: New run level: 6
The system is coming down.  Please wait.
System services are now being stopped.
/etc/rc0.d/K05initrgm: Calling scswitch -S (evacuate)
Print services already stopped.
Mar 10 13:47:44 phys-schost-1 syslogd: going down on signal 15

umount: /global/.devices/node@2 busy
umount: /global/.devices/node@1 busy
The system is down.
syncing file systems... done
WARNING: CMM: Node being shut down.
rebooting...

ATI RAGE SDRAM BIOS P/N GR-xlint.007-4.330
*                                        BIOS Lan-Console 2.0
Copyright (C) 1999-2001  Intel Corporation
MAC ADDR: 00 02 47 31 38 3C
AMIBIOS (C)1985-2002 American Megatrends Inc.,
Copyright 1996-2002 Intel Corporation
SCB20.86B.1064.P18.0208191106
SCB2 Production BIOS Version 2.08
BIOS Build 1064
2 X Intel(R) Pentium(R) III CPU family      1400MHz
Testing system memory, memory size=2048MB
2048MB Extended Memory Passed
512K L2 Cache SRAM Passed
ATAPI CD-ROM SAMSUNG CD-ROM SN-124

Press <F2> to enter SETUP, <F12> Network

Adaptec AIC-7899 SCSI BIOS v2.57S4
(c) 2000 Adaptec, Inc. All Rights Reserved.
    Press <Ctrl><A> for SCSISelect(TM) Utility!

Ch B,  SCSI ID: 0 SEAGATE  ST336605LC        160
       SCSI ID: 1 SEAGATE  ST336605LC        160
       SCSI ID: 6 ESG-SHV  SCA HSBP M18      ASYN
Ch A,  SCSI ID: 2 SUN      StorEdge 3310     160
       SCSI ID: 3 SUN      StorEdge 3310     160

AMIBIOS (C)1985-2002 American Megatrends Inc.,
Copyright 1996-2002 Intel Corporation
SCB20.86B.1064.P18.0208191106
SCB2 Production BIOS Version 2.08
BIOS Build 1064

2 X Intel(R) Pentium(R) III CPU family      1400MHz
Testing system memory, memory size=2048MB
2048MB Extended Memory Passed
512K L2 Cache SRAM Passed
ATAPI CD-ROM SAMSUNG CD-ROM SN-124    

SunOS - Intel Platform Edition             Primary Boot Subsystem, vsn 2.0

                        Current Disk Partition Information

                 Part#   Status    Type      Start       Length
                ================================================
                   1     Active   X86 BOOT     2428       21852
                   2              SOLARIS     24280     71662420
                   3              <unused> 
                   4              <unused>
              Please select the partition you wish to boot: *       *

Solaris DCB

			       loading /solaris/boot.bin

SunOS Secondary Boot version 3.00

                  Solaris Intel Platform Edition Booting System

Autobooting from bootpath: /pci@0,0/pci8086,2545@3/pci8086,1460@1d/
pci8086,341a@7,1/sd@0,0:a

If the system hardware has changed, or to boot from a different
device, interrupt the autoboot process by pressing ESC.
Press ESCape to interrupt autoboot in 2 seconds.
Initializing system
Please wait...
Warning: Resource Conflict - both devices are added

NON-ACPI device: ISY0050
     Port: 3F0-3F5, 3F7; IRQ: 6; DMA: 2
ACPI device: ISY0050
     Port: 3F2-3F3, 3F4-3F5, 3F7; IRQ: 6; DMA: 2

                     <<< Current Boot Parameters >>>
Boot path: /pci@0,0/pci8086,2545@3/pci8086,1460@1d/pci8086,341a@7,1/
sd@0,0:a
Boot args: 

Type    b [file-name] [boot-flags] <ENTER>   to boot with options
or      i <ENTER>                            to enter boot interpreter
or      <ENTER>                              to boot with defaults

                  <<< timeout in 5 seconds >>>

Select (b)oot or (i)nterpreter: Size: 276915 + 22156 + 150372 Bytes
/platform/i86pc/kernel/unix loaded - 0xac000 bytes used
SunOS Release 5.9 Version on81-feature-patch:08/30/2003 32-bit
Copyright 1983-2003 Sun Microsystems, Inc.  All rights reserved.
Use is subject to license terms.
configuring IPv4 interfaces: e1000g2.
Hostname: phys-schost-1
Booting as part of a cluster
NOTICE: CMM: Node phys-schost-1 (nodeid = 1) with votecount = 1 added.
NOTICE: CMM: Node phys-schost-2 (nodeid = 2) with votecount = 1 added.
NOTICE: CMM: Quorum device 1 (/dev/did/rdsk/d1s2) added; votecount = 1, bitmask
of nodes with configured paths = 0x3.
WARNING: CMM: Initialization for quorum device /dev/did/rdsk/d1s2 failed with
error EACCES. Will retry later.
NOTICE: clcomm: Adapter e1000g3 constructed
NOTICE: clcomm: Path phys-schost-1:e1000g3 - phys-schost-2:e1000g3 being constructed
NOTICE: clcomm: Path phys-schost-1:e1000g3 - phys-schost-2:e1000g3 being initiated
NOTICE: clcomm: Path phys-schost-1:e1000g3 - phys-schost-2:e1000g3 online
NOTICE: clcomm: Adapter e1000g0 constructed
NOTICE: clcomm: Path phys-schost-1:e1000g0 - phys-schost-2:e1000g0 being constructed
NOTICE: CMM: Node phys-schost-1: attempting to join cluster.
WARNING: CMM: Reading reservation keys from quorum device /dev/did/rdsk/d1s2
failed with error 2.
NOTICE: CMM: Cluster has reached quorum.
NOTICE: CMM: Node phys-schost-1 (nodeid = 1) is up; new incarnation number =
1068503958.
NOTICE: CMM: Node phys-schost-2 (nodeid = 2) is up; new incarnation number =
1068496374.
NOTICE: CMM: Cluster members: phys-schost-1 phys-schost-2.
NOTICE: CMM: node reconfiguration #3 completed.
NOTICE: CMM: Node phys-schost-1: joined cluster.
NOTICE: clcomm: Path phys-schost-1:e1000g0 - phys-schost-2:e1000g0 being initiated
NOTICE: clcomm: Path phys-schost-1:e1000g0 - phys-schost-2:e1000g0 online
NOTICE: CMM: Retry of initialization for quorum device /dev/did/rdsk/d1s2 was
successful.
WARNING: mod_installdrv: no major number for rsmrdt
ip: joining multicasts failed (18) on clprivnet0 - will use link layer
broadcasts for multicast
The system is coming up.  Please wait.
checking ufs filesystems
/dev/rdsk/c1t0d0s5: is clean.
NIS domain name is dev.eng.mycompany.com
starting rpc services: rpcbind keyserv ypbind done.
Setting netmask of e1000g2 to 192.168.255.0
Setting netmask of e1000g3 to 192.168.255.128
Setting netmask of e1000g0 to 192.168.255.128
Setting netmask of clprivnet0 to 192.168.255.0
Setting default IPv4 interface for multicast: add net 224.0/4: gateway phys-schost-1
syslog service starting.
obtaining access to all attached disks


*****************************************************************************
*
* The X-server can not be started on display :0...
*
*****************************************************************************
volume management starting.
Starting Fault Injection Server...
The system is ready.

phys-schost-1 console login:

如何以非叢集模式啟動叢集節點

您可以啟動一個節點以便該節點不以叢集成員身份參與作業，即非叢集模式。在安裝叢集軟體或執行某些管理程序 (如修補節點) 時，非叢集模式非常有用。

  1. 在以非叢集模式啟動的叢集上成為超級使用者。

  2. 使用 scswitch 和 shutdown 指令來關閉節點。


    # scswitch -S -h node
# shutdown -g0 -y -i0

  3. 在 [目前的啟動參數] 畫面上，請確認節點顯示 ok 提示符號或 Select (b)oot or (i)nterpreter 提示符號。

  4. 使用 boot(1M) 或帶 -x 選項的 b 指令，以非叢集模式啟動節點。

    • SPARC：


      ok boot -x

    • x86：


                            <<< Current Boot Parameters >>>
Boot path: /pci@0,0/pci8086,2545@3/pci8086,1460@1d/pci8086,341a@7,1/
sd@0,0:a
Boot args:

Type    b [file-name] [boot-flags] <ENTER>  to boot with options
or      i <ENTER>                           to enter boot interpreter
or      <ENTER>                             to boot with defaults

                  <<< timeout in 5 seconds >>>
Select (b)oot or (i)nterpreter: b -x

    節點的主控台出現的訊息指出，節點不是叢集的一部分。

SPARC: 範例—以非叢集模式啟動叢集節點

以下範例顯示 phys-schost-1 節點先關閉，再以非叢集模式啟動節點時的主控台輸出。-g0 選項將寬限期設成零，-y 提供自動的 yes 回應，以確認問題，以及 -i0 啟動執行層次 0 (零)。這個節點的關閉訊息出現在叢集中另一個節點的主控台上。


# scswitch -S -h phys-schost-1
# shutdown -g0 -y -i0
Shutdown started.    Wed Mar 10 13:47:32 phys-schost-1 cl_runtime: 

WARNING: CMM monitoring disabled.
phys-schost-1# 
...
rg_name = schost-sa-1 ...
offline node = phys-schost-2 ...
num of node = 0 ...
phys-schost-1# 
INIT: New run level: 0
The system is coming down.  Please wait.
System services are now being stopped.
Print services stopped.
syslogd: going down on signal 15
...
The system is down.
syncing file systems... done
WARNING: node phys-schost-1 is being shut down.
Program terminated

ok boot -x
...
Not booting as part of cluster
...
The system is ready.
phys-schost-1 console login:

x86: 範例—以非叢集模式啟動叢集節點

以下範例顯示 phys-schost-1 節點先關閉，再以非叢集模式啟動節點時的主控台輸出。-g0 選項將寬限期設成零，-y 提供自動的 yes 回應，以確認問題，以及 -i0 啟動執行層次 0 (零)。這個節點的關閉訊息出現在叢集中另一個節點的主控台上。


# scswitch -S -h phys-schost-1
# shutdown -g0 -y -i0
Shutdown started.    Wed Mar 10 13:47:32 PST 2004

phys-schost-1# 
INIT: New run level: 0
The system is coming down.  Please wait.
System services are now being stopped.
Print services already stopped.
Mar 10 13:47:44 phys-schost-1 syslogd: going down on signal 15
...
The system is down.
syncing file systems... done
WARNING: CMM: Node being shut down.
Type any key to continue

ATI RAGE SDRAM BIOS P/N GR-xlint.007-4.330
*                                        BIOS Lan-Console 2.0
Copyright (C) 1999-2001  Intel Corporation
MAC ADDR: 00 02 47 31 38 3C
AMIBIOS (C)1985-2002 American Megatrends Inc.,
Copyright 1996-2002 Intel Corporation
SCB20.86B.1064.P18.0208191106
SCB2 Production BIOS Version 2.08
BIOS Build 1064
2 X Intel(R) Pentium(R) III CPU family      1400MHz
Testing system memory, memory size=2048MB
2048MB Extended Memory Passed
512K L2 Cache SRAM Passed
ATAPI CD-ROM SAMSUNG CD-ROM SN-124

Press <F2> to enter SETUP, <F12> Network

Adaptec AIC-7899 SCSI BIOS v2.57S4
(c) 2000 Adaptec, Inc. All Rights Reserved.
    Press <Ctrl><A> for SCSISelect(TM) Utility!

Ch B,  SCSI ID: 0 SEAGATE  ST336605LC        160
       SCSI ID: 1 SEAGATE  ST336605LC        160
       SCSI ID: 6 ESG-SHV  SCA HSBP M18      ASYN
Ch A,  SCSI ID: 2 SUN      StorEdge 3310     160
       SCSI ID: 3 SUN      StorEdge 3310     160

AMIBIOS (C)1985-2002 American Megatrends Inc.,
Copyright 1996-2002 Intel Corporation
SCB20.86B.1064.P18.0208191106
SCB2 Production BIOS Version 2.08
BIOS Build 1064

2 X Intel(R) Pentium(R) III CPU family      1400MHz
Testing system memory, memory size=2048MB
2048MB Extended Memory Passed
512K L2 Cache SRAM Passed
ATAPI CD-ROM SAMSUNG CD-ROM SN-124    

SunOS - Intel Platform Edition             Primary Boot Subsystem, vsn 2.0

                        Current Disk Partition Information

                 Part#   Status    Type      Start       Length
                ================================================
                   1     Active   X86 BOOT     2428       21852
                   2              SOLARIS     24280     71662420
                   3              <unused> 
                   4              <unused>
              Please select the partition you wish to boot: *       *

Solaris DCB

			       loading /solaris/boot.bin

SunOS Secondary Boot version 3.00

                  Solaris Intel Platform Edition Booting System

Autobooting from bootpath: /pci@0,0/pci8086,2545@3/pci8086,1460@1d/
pci8086,341a@7,1/sd@0,0:a

If the system hardware has changed, or to boot from a different
device, interrupt the autoboot process by pressing ESC.
Press ESCape to interrupt autoboot in 2 seconds.
Initializing system
Please wait...
Warning: Resource Conflict - both devices are added

NON-ACPI device: ISY0050
     Port: 3F0-3F5, 3F7; IRQ: 6; DMA: 2
ACPI device: ISY0050
     Port: 3F2-3F3, 3F4-3F5, 3F7; IRQ: 6; DMA: 2

                     <<< Current Boot Parameters >>>
Boot path: /pci@0,0/pci8086,2545@3/pci8086,1460@1d/pci8086,341a@7,1/
sd@0,0:a
Boot args: 

Type    b [file-name] [boot-flags] <ENTER>  to boot with options
or      i <ENTER>                           to enter boot interpreter
or      <ENTER>                             to boot with defaults

                  <<< timeout in 5 seconds >>>

Select (b)oot or (i)nterpreter: b -x
...
Not booting as part of cluster
...
The system is ready.
phys-schost-1 console login: