您也可使用 SunPlex Manager GUI 來完成此程序。請參閱 SunPlex Manager 線上說明,以取得詳細資訊。
這個選項用來啟動已經存在的叢集傳輸電纜。
成為叢集中任何節點的超級使用者。
輸入 scsetup(1M) 公用程式。
# scsetup |
顯示 Main Menu。
輸入 2 (叢集交互連接) 來存取 Cluster Interconnect Menu。
輸入 7 (啟動傳輸電纜) 來啟動傳輸電纜。
請依出現的提示及指示進行。您需要同時輸入要識別之電纜某個端點的節點名稱和配接卡名稱。
確認電纜啟動成功。
# scconf -p | grep cable |
這個範例顯示如何啟動位於節點 phys-schost-2 上之配接卡 qfe-1 的叢集傳輸電纜。
[Become superuser on any node.] [Enter the scsetup utility:] # scsetup Select Cluster interconnect>Enable a transport cable. Answer the questions when prompted. You will need the following information. You Will Need: Example: node names phys-schost-2 adapter names qfe1 junction names hub1 [Verify that the scconf command completed successfully:] scconf -c -m endpoint=phys-schost-2:qfe1,state=enabled Command completed successfully. Quit the scsetup Cluster Interconnect Menu and Main Menu. [Verify that the cable is enabled:] # scconf -p | grep cable Transport cable: phys-schost-2:qfe1@0 ethernet-1@2 Enabled Transport cable: phys-schost-3:qfe0@1 ethernet-1@3 Enabled Transport cable: phys-schost-1:qfe0@0 ethernet-1@1 Enabled |