Mit dem scswitch(1M)-Befehl zusammen mit dem Solaris-shutdown(1M)-Befehl fahren Sie einen einzelnen Knoten herunter. Setzen Sie den scshutdown-Befehl nur ein, wenn Sie einen ganzen Cluster herunterfahren.
Schritt |
Anweisungen siehe |
---|---|
Stoppen eines Cluster-Knotens - Verwenden Sie scswitch(1M) und shutdown(1M) | |
Starten eines Knotens Der Knoten muss eine funktionierende Verbindung zum Cluster-Interconnect haben, um die Cluster-Mitgliedschaft zu erlangen. | |
Stoppen und Neustarten (Neubooten) eines Cluster-Knotens - Verwenden Sie scswitch und shutdown Der Knoten muss eine funktionierende Verbindung zum Cluster-Interconnect haben, um die Cluster-Mitgliedschaft zu erlangen. | |
Booten eines Knotens ohne Zugang zur Cluster-Mitgliedschaft - Verwenden Sie scswitch und shutdown, dann boot -x oder b -x |
Arbeiten Sie auf einer Cluster-Konsole nicht mit dem send brk-Befehl, um einen Cluster-Knoten herunterzufahren. Dieser Befehl wird in einem Cluster nicht unterstützt.
SPARC: Wird Oracle Parallel Server oder Oracle Real Application Clusters auf dem Cluster ausgeführt, beenden Sie alle Datenbankinstanzen.
Verfahren zum Herunterfahren finden Sie in der Oracle Parallel Server oder Oracle Real Application Clusters-Produktdokumentation.
Melden Sie sich beim herunterzufahrenden Cluster-Knoten als Superbenutzer an.
Schalten Sie alle Ressourcengruppen, Ressourcen und Gerätegruppen von dem herunterzufahrenden Knoten auf andere Cluster-Mitglieder um.
Geben Sie auf dem herunterzufahrenden Knoten folgenden Befehl ein:
# scswitch -S -h node |
Nimmt alle Gerätedienste und Ressourcengruppen vom angegebenen Knoten.
Gibt den Knoten an, von dem Sie die Ressourcen- und Gerätegruppen umschalten.
Fahren Sie den Cluster-Knoten herunter.
Geben Sie auf dem herunterzufahrenden Knoten folgenden Befehl ein:
# shutdown -g0 -y -i0 |
Überprüfen Sie, ob der Cluster-Knoten an der ok-Eingabeaufforderung oder an der Select (b)oot or (i)nterpreter-Eingabeaufforderung des Bildschirms mit den aktuellen Boot-Parametern steht.
Schalten Sie den Knoten bei Bedarf ab.
Das nachstehende Beispiel zeigt die Konsolenausgabe beim Herunterfahren des Knotens phys-schost-1 an. Die Option -g0 stellt die Toleranzzeit auf Null ein, -y sorgt für eine automatische yes-Antwort auf die Bestätigungsabfrage, und -i0 ruft die Laufebene 0 (Null) auf. Die Meldungen zum Herunterfahren dieses Knotens werden auf den Konsolen der restlichen Cluster-Knoten angezeigt.
# scswitch -S -h phys-schost-1 # shutdown -g0 -y -i0 Wed Mar 10 13:47:32 phys-schost-1 cl_runtime: WARNING: CMM monitoring disabled. phys-schost-1# INIT: New run level: 0 The system is coming down. Please wait. Notice: rgmd is being stopped. Notice: rpc.pmfd is being stopped. Notice: rpc.fed is being stopped. umount: /global/.devices/node@1 busy umount: /global/phys-schost-1 busy The system is down. syncing file systems... done Program terminated ok |
Das nachstehende Beispiel zeigt die Konsolenausgabe beim Herunterfahren des Knotens phys-schost-1 an. Die Option -g0 stellt die Toleranzzeit auf Null ein, -y sorgt für eine automatische yes-Antwort auf die Bestätigungsabfrage, und -i0 ruft die Laufebene 0 (Null) auf. Die Meldungen zum Herunterfahren dieses Knotens werden auf den Konsolen der restlichen Cluster-Knoten angezeigt.
# scswitch -S -h phys-schost-1 # shutdown -g0 -y -i0 Shutdown started. Wed Mar 10 13:47:32 PST 2004 Changing to init state 0 - please wait Broadcast Message from root (console) on phys-schost-1 Wed Mar 10 13:47:32... THE SYSTEM phys-schost-1 IS BEING SHUT DOWN NOW ! ! ! Log off now or risk your files being damaged phys-schost-1# INIT: New run level: 0 The system is coming down. Please wait. System services are now being stopped. /etc/rc0.d/K05initrgm: Calling scswitch -S (evacuate) failfasts disabled on node 1 Print services already stopped. Mar 10 13:47:44 phys-schost-1 syslogd: going down on signal 15 umount: /global/.devices/node@2 busy umount: /global/.devices/node@1 busy The system is down. syncing file systems... done WARNING: CMM: Node being shut down. Type any key to continue |
Weitere Informationen zum Neubooten eines Cluster-Knotens, der heruntergefahren wurde, finden Sie unter So booten Sie einen Cluster-Knoten.
Wenn Sie andere aktive Knoten im Cluster herunterfahren oder neu booten möchten, sollten Sie zumindest so lange warten, bis der gerade gebootete Knoten die Anmelde-Eingabeaufforderung erreicht hat. Andernfalls kann der Knoten keine Dienste von anderen Knoten im Cluster übernehmen, die Sie herunterfahren oder neu booten.
Das Starten eines Cluster-Knotens kann von der Quorum-Konfiguration beeinflusst werden. In einem Zwei-Knoten-Cluster müssen Sie das Quorum-Gerät so konfigurieren, dass der Quorum-Gesamtstimmenzähler für den Cluster Drei beträgt. Sie sollten einen Quorum-Zähler für jeden Knoten und einen für das Quorum-Gerät konfiguriert haben. Wenn der erste Knoten in diesem Fall heruntergefahren wird, hat der zweite Knoten weiterhin Quorum und läuft als einziges Cluster-Mitglied. Damit der erste Knoten dem Cluster wieder als Cluster-Knoten beitreten kann, muss der zweite Knoten aktiv sein und laufen. Der erforderliche Cluster-Quorum-Zählerwert (Zwei) muss erreicht werden.
Zum Starten eines heruntergefahrenen Cluster-Knotens booten Sie den Knoten.
SPARC:
ok boot |
x86:
<<< Current Boot Parameters >>> Boot path: /pci@0,0/pci8086,2545@3/pci8086,1460@1d/pci8086,341a@7,1/ sd@0,0:a Boot args: Type b [file-name] [boot-flags] <ENTER> to boot with options or i <ENTER> to enter boot interpreter or <ENTER> to boot with defaults <<< timeout in 5 seconds >>> Select (b)oot or (i)nterpreter: b |
Auf den Konsolen der gebooteten Knoten werden beim Aktivieren der Cluster-Komponenten Meldungen angezeigt.
Ein Cluster-Knoten muss eine funktionierende Verbindung zum Cluster-Interconnect haben, um die Cluster-Mitgliedschaft zu erlangen.
Überprüfen Sie, ob der Knoten fehlerfrei gebootet wurde und online ist.
Der scstat-Befehl gibt den Status eines Knotens zurück.
# scstat -n |
Wenn das /var-Dateisystem eines Cluster-Knotens voll wird, kann Sun Cluster auf dem Knoten möglicherweise nicht neu gestartet werden. Wenn dieses Problem auftritt, lesen Sie den Abschnitt So reparieren Sie ein volles /var-Dateisystem.
Das nachstehende Beispiel zeigt die Konsolenausgabe beim Start des Knotens phys-schost-1 in einem Cluster.
ok boot Rebooting with command: boot ... Hostname: phys-schost-1 Booting as part of a cluster ... NOTICE: Node phys-schost-1: attempting to join cluster ... NOTICE: Node phys-schost-1: joined cluster ... The system is coming up. Please wait. checking ufs filesystems ... reservation program successfully exiting Print services started. volume management starting. The system is ready. phys-schost-1 console login: |
Das nachstehende Beispiel zeigt die Konsolenausgabe beim Start des Knotens phys-schost-1 in einem Cluster.
<<< Current Boot Parameters >>> Boot path: /pci@0,0/pci8086,2545@3/pci8086,1460@1d/pci8086,341a@7,1/sd@0,0:a Boot args: Type b [file-name] [boot-flags] <ENTER> to boot with options or i <ENTER> to enter boot interpreter or <ENTER> to boot with defaults <<< timeout in 5 seconds >>> Select (b)oot or (i)nterpreter: Size: 276915 + 22156 + 150372 Bytes /platform/i86pc/kernel/unix loaded - 0xac000 bytes used SunOS Release 5.9 Version on81-feature-patch:08/30/2003 32-bit Copyright 1983-2003 Sun Microsystems, Inc. All rights reserved. Use is subject to license terms. configuring IPv4 interfaces: e1000g2. Hostname: phys-schost-1 Booting as part of a cluster NOTICE: CMM: Node phys-schost-1 (nodeid = 1) with votecount = 1 added. NOTICE: CMM: Node phys-schost-2 (nodeid = 2) with votecount = 1 added. NOTICE: CMM: Quorum device 1 (/dev/did/rdsk/d1s2) added; votecount = 1, bitmask of nodes with configured paths = 0x3. WARNING: CMM: Initialization for quorum device /dev/did/rdsk/d1s2 failed with error EACCES. Will retry later. NOTICE: clcomm: Adapter e1000g3 constructed NOTICE: clcomm: Path phys-schost-1:e1000g3 - phys-schost-2:e1000g3 being constructed NOTICE: clcomm: Path phys-schost-1:e1000g3 - phys-schost-2:e1000g3 being initiated NOTICE: clcomm: Path phys-schost-1:e1000g3 - phys-schost-2:e1000g3 online NOTICE: clcomm: Adapter e1000g0 constructed NOTICE: clcomm: Path phys-schost-1:e1000g0 - phys-schost-2:e1000g0 being constructed NOTICE: CMM: Node phys-schost-1: attempting to join cluster. WARNING: CMM: Reading reservation keys from quorum device /dev/did/rdsk/d1s2 failed with error 2. NOTICE: CMM: Cluster has reached quorum. NOTICE: CMM: Node phys-schost-1 (nodeid = 1) is up; new incarnation number = 1068503958. NOTICE: CMM: Node phys-schost-2 (nodeid = 2) is up; new incarnation number = 1068496374. NOTICE: CMM: Cluster members: phys-schost-1 phys-schost-2. NOTICE: CMM: node reconfiguration #3 completed. NOTICE: CMM: Node phys-schost-1: joined cluster. NOTICE: clcomm: Path phys-schost-1:e1000g0 - phys-schost-2:e1000g0 being initiated NOTICE: clcomm: Path phys-schost-1:e1000g0 - phys-schost-2:e1000g0 online NOTICE: CMM: Retry of initialization for quorum device /dev/did/rdsk/d1s2 was successful. WARNING: mod_installdrv: no major number for rsmrdt ip: joining multicasts failed (18) on clprivnet0 - will use link layer broadcasts for multicast The system is coming up. Please wait. checking ufs filesystems /dev/rdsk/c1t0d0s5: is clean. NIS domain name is dev.eng.mycompany.com starting rpc services: rpcbind keyserv ypbind done. Setting netmask of e1000g2 to 192.168.255.0 Setting netmask of e1000g3 to 192.168.255.128 Setting netmask of e1000g0 to 192.168.255.128 Setting netmask of clprivnet0 to 192.168.255.0 Setting default IPv4 interface for multicast: add net 224.0/4: gateway phys-schost-1 syslog service starting. obtaining access to all attached disks ***************************************************************************** * * The X-server can not be started on display :0... * ***************************************************************************** volume management starting. Starting Fault Injection Server... The system is ready. phys-schost-1 console login: |
Wenn Sie andere aktive Knoten im Cluster herunterfahren oder neu booten möchten, sollten Sie zumindest so lange warten, bis der gerade neu gebootete Knoten die Anmelde-Eingabeaufforderung erreicht hat. Andernfalls kann der Knoten keine Dienste von anderen Knoten im Cluster übernehmen, die Sie herunterfahren oder neu booten.
SPARC: Wird Oracle Parallel Server oder Oracle Real Application Clusters auf dem Cluster ausgeführt, beenden Sie alle Datenbankinstanzen.
Verfahren zum Herunterfahren finden Sie in der Oracle Parallel Server oder Oracle Real Application Clusters-Produktdokumentation.
Melden Sie sich beim herunterzufahrenden Cluster-Knoten als Superbenutzer an.
Fahren Sie den Cluster-Knoten mit den Befehlen scswitch und shutdown herunter.
Geben Sie diese Befehle auf dem herunterzufahrenden Knoten ein. Die Option -i 6 mit dem shutdown-Befehl sorgt für das Neubooten des Knotens, nachdem dieser heruntergefahren wurde.
# scswitch -S -h node # shutdown -g0 -y -i6 |
Cluster-Knoten müssen eine funktionierende Verbindung zum Cluster-Interconnect haben, um die Cluster-Mitgliedschaft zu erlangen.
Überprüfen Sie, ob der Knoten fehlerfrei gebootet wurde und online ist.
# scstat -n |
Das nachstehende Beispiel zeigt die Konsolenausgabe beim Neubooten des Knotens phys-schost-1. Meldungen für diesen Knoten wie Benachrichtigungen über Herunterfahren und Starten werden auf den Konsolen anderer Knoten im Cluster angezeigt.
# scswitch -S -h phys-schost-1 # shutdown -g0 -y -i6 Shutdown started. Wed Mar 10 13:47:32 phys-schost-1 cl_runtime: WARNING: CMM monitoring disabled. phys-schost-1# INIT: New run level: 6 The system is coming down. Please wait. System services are now being stopped. Notice: rgmd is being stopped. Notice: rpc.pmfd is being stopped. Notice: rpc.fed is being stopped. umount: /global/.devices/node@1 busy umount: /global/phys-schost-1 busy The system is down. syncing file systems... done rebooting... Resetting ... ,,, Sun Ultra 1 SBus (UltraSPARC 143MHz), No Keyboard OpenBoot 3.11, 128 MB memory installed, Serial #5932401. Ethernet address 8:8:20:99:ab:77, Host ID: 8899ab77. ... Rebooting with command: boot ... Hostname: phys-schost-1 Booting as part of a cluster ... NOTICE: Node phys-schost-1: attempting to join cluster ... NOTICE: Node phys-schost-1: joined cluster ... The system is coming up. Please wait. The system is ready. phys-schost-1 console login: |
Das nachstehende Beispiel zeigt die Konsolenausgabe beim Neubooten des Knotens phys-schost-1. Meldungen für diesen Knoten wie Benachrichtigungen über Herunterfahren und Starten werden auf den Konsolen anderer Knoten im Cluster angezeigt.
# scswitch -S -h phys-schost-1 # shutdown -g0 -y -i6 Shutdown started. Wed Mar 10 13:47:32 PST 2004 Changing to init state 6 - please wait Broadcast Message from root (console) on phys-schost-1 Wed Mar 10 13:47:32... THE SYSTEM phys-schost-1 IS BEING SHUT DOWN NOW ! ! ! Log off now or risk your files being damaged phys-schost-1# INIT: New run level: 6 The system is coming down. Please wait. System services are now being stopped. /etc/rc0.d/K05initrgm: Calling scswitch -S (evacuate) Print services already stopped. Mar 10 13:47:44 phys-schost-1 syslogd: going down on signal 15 umount: /global/.devices/node@2 busy umount: /global/.devices/node@1 busy The system is down. syncing file systems... done WARNING: CMM: Node being shut down. rebooting... ATI RAGE SDRAM BIOS P/N GR-xlint.007-4.330 * BIOS Lan-Console 2.0 Copyright (C) 1999-2001 Intel Corporation MAC ADDR: 00 02 47 31 38 3C AMIBIOS (C)1985-2002 American Megatrends Inc., Copyright 1996-2002 Intel Corporation SCB20.86B.1064.P18.0208191106 SCB2 Production BIOS Version 2.08 BIOS Build 1064 2 X Intel(R) Pentium(R) III CPU family 1400MHz Testing system memory, memory size=2048MB 2048MB Extended Memory Passed 512K L2 Cache SRAM Passed ATAPI CD-ROM SAMSUNG CD-ROM SN-124 Press <F2> to enter SETUP, <F12> Network Adaptec AIC-7899 SCSI BIOS v2.57S4 (c) 2000 Adaptec, Inc. All Rights Reserved. Press <Ctrl><A> for SCSISelect(TM) Utility! Ch B, SCSI ID: 0 SEAGATE ST336605LC 160 SCSI ID: 1 SEAGATE ST336605LC 160 SCSI ID: 6 ESG-SHV SCA HSBP M18 ASYN Ch A, SCSI ID: 2 SUN StorEdge 3310 160 SCSI ID: 3 SUN StorEdge 3310 160 AMIBIOS (C)1985-2002 American Megatrends Inc., Copyright 1996-2002 Intel Corporation SCB20.86B.1064.P18.0208191106 SCB2 Production BIOS Version 2.08 BIOS Build 1064 2 X Intel(R) Pentium(R) III CPU family 1400MHz Testing system memory, memory size=2048MB 2048MB Extended Memory Passed 512K L2 Cache SRAM Passed ATAPI CD-ROM SAMSUNG CD-ROM SN-124 SunOS - Intel Platform Edition Primary Boot Subsystem, vsn 2.0 Current Disk Partition Information Part# Status Type Start Length ================================================ 1 Active X86 BOOT 2428 21852 2 SOLARIS 24280 71662420 3 <unused> 4 <unused> Please select the partition you wish to boot: * * Solaris DCB loading /solaris/boot.bin SunOS Secondary Boot version 3.00 Solaris Intel Platform Edition Booting System Autobooting from bootpath: /pci@0,0/pci8086,2545@3/pci8086,1460@1d/ pci8086,341a@7,1/sd@0,0:a If the system hardware has changed, or to boot from a different device, interrupt the autoboot process by pressing ESC. Press ESCape to interrupt autoboot in 2 seconds. Initializing system Please wait... Warning: Resource Conflict - both devices are added NON-ACPI device: ISY0050 Port: 3F0-3F5, 3F7; IRQ: 6; DMA: 2 ACPI device: ISY0050 Port: 3F2-3F3, 3F4-3F5, 3F7; IRQ: 6; DMA: 2 <<< Current Boot Parameters >>> Boot path: /pci@0,0/pci8086,2545@3/pci8086,1460@1d/pci8086,341a@7,1/ sd@0,0:a Boot args: Type b [file-name] [boot-flags] <ENTER> to boot with options or i <ENTER> to enter boot interpreter or <ENTER> to boot with defaults <<< timeout in 5 seconds >>> Select (b)oot or (i)nterpreter: Size: 276915 + 22156 + 150372 Bytes /platform/i86pc/kernel/unix loaded - 0xac000 bytes used SunOS Release 5.9 Version on81-feature-patch:08/30/2003 32-bit Copyright 1983-2003 Sun Microsystems, Inc. All rights reserved. Use is subject to license terms. configuring IPv4 interfaces: e1000g2. Hostname: phys-schost-1 Booting as part of a cluster NOTICE: CMM: Node phys-schost-1 (nodeid = 1) with votecount = 1 added. NOTICE: CMM: Node phys-schost-2 (nodeid = 2) with votecount = 1 added. NOTICE: CMM: Quorum device 1 (/dev/did/rdsk/d1s2) added; votecount = 1, bitmask of nodes with configured paths = 0x3. WARNING: CMM: Initialization for quorum device /dev/did/rdsk/d1s2 failed with error EACCES. Will retry later. NOTICE: clcomm: Adapter e1000g3 constructed NOTICE: clcomm: Path phys-schost-1:e1000g3 - phys-schost-2:e1000g3 being constructed NOTICE: clcomm: Path phys-schost-1:e1000g3 - phys-schost-2:e1000g3 being initiated NOTICE: clcomm: Path phys-schost-1:e1000g3 - phys-schost-2:e1000g3 online NOTICE: clcomm: Adapter e1000g0 constructed NOTICE: clcomm: Path phys-schost-1:e1000g0 - phys-schost-2:e1000g0 being constructed NOTICE: CMM: Node phys-schost-1: attempting to join cluster. WARNING: CMM: Reading reservation keys from quorum device /dev/did/rdsk/d1s2 failed with error 2. NOTICE: CMM: Cluster has reached quorum. NOTICE: CMM: Node phys-schost-1 (nodeid = 1) is up; new incarnation number = 1068503958. NOTICE: CMM: Node phys-schost-2 (nodeid = 2) is up; new incarnation number = 1068496374. NOTICE: CMM: Cluster members: phys-schost-1 phys-schost-2. NOTICE: CMM: node reconfiguration #3 completed. NOTICE: CMM: Node phys-schost-1: joined cluster. NOTICE: clcomm: Path phys-schost-1:e1000g0 - phys-schost-2:e1000g0 being initiated NOTICE: clcomm: Path phys-schost-1:e1000g0 - phys-schost-2:e1000g0 online NOTICE: CMM: Retry of initialization for quorum device /dev/did/rdsk/d1s2 was successful. WARNING: mod_installdrv: no major number for rsmrdt ip: joining multicasts failed (18) on clprivnet0 - will use link layer broadcasts for multicast The system is coming up. Please wait. checking ufs filesystems /dev/rdsk/c1t0d0s5: is clean. NIS domain name is dev.eng.mycompany.com starting rpc services: rpcbind keyserv ypbind done. Setting netmask of e1000g2 to 192.168.255.0 Setting netmask of e1000g3 to 192.168.255.128 Setting netmask of e1000g0 to 192.168.255.128 Setting netmask of clprivnet0 to 192.168.255.0 Setting default IPv4 interface for multicast: add net 224.0/4: gateway phys-schost-1 syslog service starting. obtaining access to all attached disks ***************************************************************************** * * The X-server can not be started on display :0... * ***************************************************************************** volume management starting. Starting Fault Injection Server... The system is ready. phys-schost-1 console login: |
Sie können einen Knoten so booten, dass er nicht am Cluster teilnimmt (im Nicht-Cluster-Modus). Der Nicht-Cluster-Modus kann zum Installieren der Cluster-Software oder zum Durchführen bestimmter Verwaltungsverfahren, zum Beispiel beim Installieren einer Korrekturversion, eingesetzt werden.
Melden Sie sich beim Cluster-Knoten, der im Nicht-Cluster-Modus gestartet werden soll, als Superbenutzer an.
Fahren Sie den Knoten mit den Befehlen scswitch und shutdown herunter.
# scswitch -S -h node# shutdown -g0 -y -i0 |
Überprüfen Sie, ob der Knoten an der ok-Eingabeaufforderung oder an der Select (b)oot or (i)nterpreter-Eingabeaufforderung im Bildschirm mit den aktuellen Boot-Parametern steht.
Booten Sie den Knoten im Nicht-Cluster-Modus mit dem boot(1M)- oder dem b-Befehl mit der -x-Option.
SPARC:
ok boot -x |
x86:
<<< Current Boot Parameters >>> Boot path: /pci@0,0/pci8086,2545@3/pci8086,1460@1d/pci8086,341a@7,1/ sd@0,0:a Boot args: Type b [file-name] [boot-flags] <ENTER> to boot with options or i <ENTER> to enter boot interpreter or <ENTER> to boot with defaults <<< timeout in 5 seconds >>> Select (b)oot or (i)nterpreter: b -x |
Auf der Konsole des Knotens werden Meldungen mit dem Hinweis angezeigt, dass der Knoten nicht zum Cluster gehört.
Das nachstehende Beispiel zeigt die Konsolenausgabe beim Herunterfahren und Neustarten des Knotens phys-schost-1 im Nicht-Cluster-Modus. Die Option -g0 stellt die Toleranzzeit auf Null ein, -y sorgt für eine automatische yes-Antwort auf die Bestätigungsabfrage, und -i0 ruft die Laufebene 0 (Null) auf. Die Meldungen zum Herunterfahren dieses Knotens werden auf den Konsolen der restlichen Cluster-Knoten angezeigt.
# scswitch -S -h phys-schost-1 # shutdown -g0 -y -i0 Shutdown started. Wed Mar 10 13:47:32 phys-schost-1 cl_runtime: WARNING: CMM monitoring disabled. phys-schost-1# ... rg_name = schost-sa-1 ... offline node = phys-schost-2 ... num of node = 0 ... phys-schost-1# INIT: New run level: 0 The system is coming down. Please wait. System services are now being stopped. Print services stopped. syslogd: going down on signal 15 ... The system is down. syncing file systems... done WARNING: node phys-schost-1 is being shut down. Program terminated ok boot -x ... Not booting as part of cluster ... The system is ready. phys-schost-1 console login: |
Das nachstehende Beispiel zeigt die Konsolenausgabe beim Herunterfahren und Neustarten des Knotens phys-schost-1 im Nicht-Cluster-Modus. Die Option -g0 stellt die Toleranzzeit auf Null ein, -y sorgt für eine automatische yes-Antwort auf die Bestätigungsabfrage, und -i0 ruft die Laufebene 0 (Null) auf. Die Meldungen zum Herunterfahren dieses Knotens werden auf den Konsolen der restlichen Cluster-Knoten angezeigt.
# scswitch -S -h phys-schost-1 # shutdown -g0 -y -i0 Shutdown started. Wed Mar 10 13:47:32 PST 2004 phys-schost-1# INIT: New run level: 0 The system is coming down. Please wait. System services are now being stopped. Print services already stopped. Mar 10 13:47:44 phys-schost-1 syslogd: going down on signal 15 ... The system is down. syncing file systems... done WARNING: CMM: Node being shut down. Type any key to continue ATI RAGE SDRAM BIOS P/N GR-xlint.007-4.330 * BIOS Lan-Console 2.0 Copyright (C) 1999-2001 Intel Corporation MAC ADDR: 00 02 47 31 38 3C AMIBIOS (C)1985-2002 American Megatrends Inc., Copyright 1996-2002 Intel Corporation SCB20.86B.1064.P18.0208191106 SCB2 Production BIOS Version 2.08 BIOS Build 1064 2 X Intel(R) Pentium(R) III CPU family 1400MHz Testing system memory, memory size=2048MB 2048MB Extended Memory Passed 512K L2 Cache SRAM Passed ATAPI CD-ROM SAMSUNG CD-ROM SN-124 Press <F2> to enter SETUP, <F12> Network Adaptec AIC-7899 SCSI BIOS v2.57S4 (c) 2000 Adaptec, Inc. All Rights Reserved. Press <Ctrl><A> for SCSISelect(TM) Utility! Ch B, SCSI ID: 0 SEAGATE ST336605LC 160 SCSI ID: 1 SEAGATE ST336605LC 160 SCSI ID: 6 ESG-SHV SCA HSBP M18 ASYN Ch A, SCSI ID: 2 SUN StorEdge 3310 160 SCSI ID: 3 SUN StorEdge 3310 160 AMIBIOS (C)1985-2002 American Megatrends Inc., Copyright 1996-2002 Intel Corporation SCB20.86B.1064.P18.0208191106 SCB2 Production BIOS Version 2.08 BIOS Build 1064 2 X Intel(R) Pentium(R) III CPU family 1400MHz Testing system memory, memory size=2048MB 2048MB Extended Memory Passed 512K L2 Cache SRAM Passed ATAPI CD-ROM SAMSUNG CD-ROM SN-124 SunOS - Intel Platform Edition Primary Boot Subsystem, vsn 2.0 Current Disk Partition Information Part# Status Type Start Length ================================================ 1 Active X86 BOOT 2428 21852 2 SOLARIS 24280 71662420 3 <unused> 4 <unused> Please select the partition you wish to boot: * * Solaris DCB loading /solaris/boot.bin SunOS Secondary Boot version 3.00 Solaris Intel Platform Edition Booting System Autobooting from bootpath: /pci@0,0/pci8086,2545@3/pci8086,1460@1d/ pci8086,341a@7,1/sd@0,0:a If the system hardware has changed, or to boot from a different device, interrupt the autoboot process by pressing ESC. Press ESCape to interrupt autoboot in 2 seconds. Initializing system Please wait... Warning: Resource Conflict - both devices are added NON-ACPI device: ISY0050 Port: 3F0-3F5, 3F7; IRQ: 6; DMA: 2 ACPI device: ISY0050 Port: 3F2-3F3, 3F4-3F5, 3F7; IRQ: 6; DMA: 2 <<< Current Boot Parameters >>> Boot path: /pci@0,0/pci8086,2545@3/pci8086,1460@1d/pci8086,341a@7,1/ sd@0,0:a Boot args: Type b [file-name] [boot-flags] <ENTER> to boot with options or i <ENTER> to enter boot interpreter or <ENTER> to boot with defaults <<< timeout in 5 seconds >>> Select (b)oot or (i)nterpreter: b -x ... Not booting as part of cluster ... The system is ready. phys-schost-1 console login: |