test

Sun Cluster: Guía de administración del sistema para el SO Solaris

ProcedureCómo rearrancar un nodo del clúster

Si desea detener o reiniciar otros nodos activos de clúster, espere hasta que el nodo que está arrancando haya alcanzado el símbolo de inicio de sesión. De lo contrario, el nodo no estará disponible para asumir servicios de otros nodos en el clúster que desee cerrar o arrancar.

Pasos

  1. SPARC: Si el nodo del clúster está ejecutando Oracle Parallel Server u Oracle Real Application Clusters, pare todas las instancias de la base de datos.

    Para averiguar los procedimientos de parada, consulte la documentación del producto de Oracle Parallel Server u Oracle Real Application Clusters.

  2. Conviértase en usuario root en el nodo del clúster que se debe parar.

  3. Pare el nodo del clúster mediante los comandos scswitch y shutdown.

    Escriba estos comandos en el nodo que se debe parar. La opción -i 6 del comando shutdown hace que el nodo rearranque después de pararse. 


    # scswitch -S -h node
# shutdown -g0 -y -i6
    Nota –

    Los nodos deben disponer de una conexión funcional con la interconexión del clúster para pertenecer a éste.

  4. Compruebe que el nodo haya arrancado sin errores y se encuentre en línea. 


    # scstat -n
Ejemplo 3–11 SPARC: Rearrancar un nodo del clúster

En el ejemplo siguiente se muestra la salida de la consola correspondiente a la acción de rearrancar el nodo phys-schost-1. Los mensajes correspondientes a este nodo, como la notificación de parada y la de rearranque, aparecen en las consolas de los otros nodos del clúster. 


# scswitch -S -h phys-schost-1
# shutdown -g0 -y -i6
Shutdown started.    Wed Mar 10 13:47:32 phys-schost-1 cl_runtime: 

WARNING: CMM monitoring disabled.
phys-schost-1# 
INIT: New run level: 6
The system is coming down.  Please wait.
System services are now being stopped.
Notice: rgmd is being stopped.
Notice: rpc.pmfd is being stopped.
Notice: rpc.fed is being stopped.
umount: /global/.devices/node@1 busy
umount: /global/phys-schost-1 busy
The system is down.
syncing file systems... done
rebooting...
Resetting ... 
,,,
Sun Ultra 1 SBus (UltraSPARC 143MHz), No Keyboard
OpenBoot 3.11, 128 MB memory installed, Serial #5932401.
Ethernet address 8:8:20:99:ab:77, Host ID: 8899ab77.
...
Rebooting with command: boot
...
Hostname: phys-schost-1
Booting as part of a cluster
...
NOTICE: Node phys-schost-1: attempting to join cluster
...
NOTICE: Node phys-schost-1: joined cluster
...
The system is coming up.  Please wait.
The system is ready.
phys-schost-1 console login:
Ejemplo 3–12 x86: Rearrancar un nodo del clúster

En el ejemplo siguiente se muestra la salida de la consola correspondiente a la acción de rearrancar el nodo phys-schost-1. Los mensajes correspondientes a este nodo, como la notificación de parada y la de rearranque, aparecen en las consolas de los otros nodos del clúster. 


# scswitch -S -h phys-schost-1
# shutdown -g0 -y -i6
Shutdown started.    Wed Mar 10 13:47:32 PST 2004

Changing to init state 6 - please wait
Broadcast Message from root (console) on phys-schost-1 Wed Mar 10 13:47:32...
THE SYSTEM phys-schost-1 IS BEING SHUT DOWN NOW ! ! !
Log off now or risk your files being damaged

phys-schost-1# 
INIT: New run level: 6
The system is coming down.  Please wait.
System services are now being stopped.
/etc/rc0.d/K05initrgm: Calling scswitch -S (evacuate)
Print services already stopped.
Mar 10 13:47:44 phys-schost-1 syslogd: going down on signal 15

umount: /global/.devices/node@2 busy
umount: /global/.devices/node@1 busy
The system is down.
syncing file systems... done
WARNING: CMM: Node being shut down.
rebooting...

ATI RAGE SDRAM BIOS P/N GR-xlint.007-4.330
*                                        BIOS Lan-Console 2.0
Copyright (C) 1999-2001  Intel Corporation
MAC ADDR: 00 02 47 31 38 3C
AMIBIOS (C)1985-2002 American Megatrends Inc.,
Copyright 1996-2002 Intel Corporation
SCB20.86B.1064.P18.0208191106
SCB2 Production BIOS Version 2.08
BIOS Build 1064
2 X Intel(R) Pentium(R) III CPU family      1400MHz
Testing system memory, memory size=2048MB
2048MB Extended Memory Passed
512K L2 Cache SRAM Passed
ATAPI CD-ROM SAMSUNG CD-ROM SN-124

Press <F2> to enter SETUP, <F12> Network

Adaptec AIC-7899 SCSI BIOS v2.57S4
(c) 2000 Adaptec, Inc. All Rights Reserved.
    Press <Ctrl><A> for SCSISelect(TM) Utility!

Ch B,  SCSI ID: 0 SEAGATE  ST336605LC        160
       SCSI ID: 1 SEAGATE  ST336605LC        160
       SCSI ID: 6 ESG-SHV  SCA HSBP M18      ASYN
Ch A,  SCSI ID: 2 SUN      StorEdge 3310     160
       SCSI ID: 3 SUN      StorEdge 3310     160

AMIBIOS (C)1985-2002 American Megatrends Inc.,
Copyright 1996-2002 Intel Corporation
SCB20.86B.1064.P18.0208191106
SCB2 Production BIOS Version 2.08
BIOS Build 1064

2 X Intel(R) Pentium(R) III CPU family      1400MHz
Testing system memory, memory size=2048MB
2048MB Extended Memory Passed
512K L2 Cache SRAM Passed
ATAPI CD-ROM SAMSUNG CD-ROM SN-124    

SunOS - Intel Platform Edition             Primary Boot Subsystem, vsn 2.0

                        Current Disk Partition Information

                 Part#   Status    Type      Start       Length
                ================================================
                   1     Active   X86 BOOT     2428       21852
                   2              SOLARIS     24280     71662420
                   3              <unused> 
                   4              <unused>
              Please select the partition you wish to boot: *       *

Solaris DCB

			       loading /solaris/boot.bin

SunOS Secondary Boot version 3.00

                  Solaris Intel Platform Edition Booting System

Autobooting from bootpath: /pci@0,0/pci8086,2545@3/pci8086,1460@1d/
pci8086,341a@7,1/sd@0,0:a

If the system hardware has changed, or to boot from a different
device, interrupt the autoboot process by pressing ESC.
Press ESCape to interrupt autoboot in 2 seconds.
Initializing system
Please wait...
Warning: Resource Conflict - both devices are added

NON-ACPI device: ISY0050
     Port: 3F0-3F5, 3F7; IRQ: 6; DMA: 2
ACPI device: ISY0050
     Port: 3F2-3F3, 3F4-3F5, 3F7; IRQ: 6; DMA: 2

                     <<<  Parámetros de arranque actuales>>>
Ruta de arranque: /pci@0,0/pci8086,2545@3/pci8086,1460@1d/pci8086,341a@7,1/
sd@0,0:a
Argumentos de arranque: 

Escriba b [nombre_archivo] [indicadores_arranque] <INTRO>  arrancar con opciones
o      i <INTRO>                            introducir el intérprete de arranque
o      <INTRO>                              arrancar con los valores predeterminados

                  <<< tiempo de espera sobrepasado en 5 segundos>>>

Seleccione (b)arranque o (i)ntérprete: Size: 276915 + 22156 + 150372 Bytes
/platform/i86pc/kernel/unix loaded - 0xac000 bytes used
SunOS Release 5.9 Version on81-feature-patch:08/30/2003 32-bit
Copyright 1983-2003 Sun Microsystems, Inc.  All rights reserved.
Use is subject to license terms.
configuring IPv4 interfaces: e1000g2.
Hostname: phys-schost-1
Booting as part of a cluster
NOTICE: CMM: Node phys-schost-1 (nodeid = 1) with votecount = 1 added.
NOTICE: CMM: Node phys-schost-2 (nodeid = 2) with votecount = 1 added.
NOTICE: CMM: Quorum device 1 (/dev/did/rdsk/d1s2) added; votecount = 1, bitmask
of nodes with configured paths = 0x3.
WARNING: CMM: Initialization for quorum device /dev/did/rdsk/d1s2 failed with
error EACCES. Will retry later.
NOTICE: clcomm: Adapter e1000g3 constructed
NOTICE: clcomm: Path phys-schost-1:e1000g3 - phys-schost-2:e1000g3 being constructed
NOTICE: clcomm: Path phys-schost-1:e1000g3 - phys-schost-2:e1000g3 being initiated
NOTICE: clcomm: Path phys-schost-1:e1000g3 - phys-schost-2:e1000g3 online
NOTICE: clcomm: Adapter e1000g0 constructed
NOTICE: clcomm: Path phys-schost-1:e1000g0 - phys-schost-2:e1000g0 being constructed
NOTICE: CMM: Node phys-schost-1: attempting to join cluster.
WARNING: CMM: Reading reservation keys from quorum device /dev/did/rdsk/d1s2
failed with error 2.
NOTICE: CMM: Cluster has reached quorum.
NOTICE: CMM: Node phys-schost-1 (nodeid = 1) is up; new incarnation number =
1068503958.
NOTICE: CMM: Node phys-schost-2 (nodeid = 2) is up; new incarnation number =
1068496374.
NOTICE: CMM: Cluster members: phys-schost-1 phys-schost-2.
NOTICE: CMM: node reconfiguration #3 completed.
NOTICE: CMM: Node phys-schost-1: joined cluster.
NOTICE: clcomm: Path phys-schost-1:e1000g0 - phys-schost-2:e1000g0 being initiated
NOTICE: clcomm: Path phys-schost-1:e1000g0 - phys-schost-2:e1000g0 online
NOTICE: CMM: Retry of initialization for quorum device /dev/did/rdsk/d1s2 was
successful.
WARNING: mod_installdrv: no major number for rsmrdt
ip: joining multicasts failed (18) on clprivnet0 - will use link layer
broadcasts for multicast
The system is coming up.  Please wait.
checking ufs filesystems
/dev/rdsk/c1t0d0s5: is clean.
NIS domain name is dev.eng.mycompany.com
starting rpc services: rpcbind keyserv ypbind done.
Setting netmask of e1000g2 to 192.168.255.0
Setting netmask of e1000g3 to 192.168.255.128
Setting netmask of e1000g0 to 192.168.255.128
Setting netmask of clprivnet0 to 192.168.255.0
Setting default IPv4 interface for multicast: add net 224.0/4: gateway phys-schost-1
syslog service starting.
obtaining access to all attached disks


*****************************************************************************
*
* The X-server can not be started on display :0...
*
*****************************************************************************
volume management starting.
Starting Fault Injection Server...
The system is ready.

phys-schost-1 console login: