Este procedimiento se puede efectuar también mediante la GUI de SunPlex Manager. Para obtener más información consulte la ayuda en línea de SunPlex Manager.
Esta opción se utiliza para habilitar un cable de transporte del clúster ya existente.
Conviértase en usuario root en cualquiera de los nodos del clúster.
Ejecute la utilidad scsetup(1M).
# scsetup |
Se mostrará el Menú principal.
Para acceder al menú de interconexión del clúster, escriba 4 (Interconexión del clúster).
Habilite el cable de transporte; escriba 7 (Habilitar un cable de transporte).
Siga las instrucciones indicadas. Deberá especificar los nombres del nodo y del adaptador de uno de los extremos del cable que desee identificar.
Compruebe que el cable esté habilitado.
# scconf -p | grep cable |
En este ejemplo se muestra cómo habilitar un cable de transporte del clúster en el adaptador qfe-1 del nodo phys-schost-2.
[Become superuser on any node.] [Enter the scsetup utility:] # scsetup Select Cluster interconnect>Enable a transport cable. Answer the questions when prompted. You will need the following information. You Will Need: Example: node names phys-schost-2 adapter names qfe1 junction names hub1 [Verify that the scconf command completed successfully:] scconf -c -m endpoint=phys-schost-2:qfe1,state=enabled Command completed successfully. Quit the scsetup Cluster Interconnect Menu and Main Menu. [Verify that the cable is enabled:] # scconf -p | grep cable Transport cable: phys-schost-2:qfe1@0 ethernet-1@2 Enabled Transport cable: phys-schost-3:qfe0@1 ethernet-1@3 Enabled Transport cable: phys-schost-1:qfe0@0 ethernet-1@1 Enabled |