개별 노드를 종료하려면 Solaris의 shutdown(1M) 명령과 함께 scswitch(1M) 명령을 사용하십시오. 전체 클러스터를 종료하는 경우에만 scshutdown 명령을 사용하십시오.
작업 |
지침 |
---|---|
클러스터 노드 중지 - scswitch(1M) 및 shutdown(1M) 사용 | |
노드 시작 클러스터 멤버쉽을 얻으려면 클러스터 노드에 클러스터 상호 연결에 대하여 작동하는 연결이 있어야 합니다. | |
클러스터 노드를 중지시키고 다시 시작(재부트) - scswitch 및 shutdown을 사용하십시오. 클러스터 멤버쉽을 얻으려면 클러스터 노드에 클러스터 상호 연결에 대하여 작동하는 연결이 있어야 합니다. | |
노드가 클러스터 구성원에 포함되지 않도록 노드 부트 - scswitch 및 shutdown을 사용한 후 boot -x 또는 b -x 사용 |
클러스터 콘솔에서 send brk 명령을 사용하여 클러스터 노드를 종료하지 마십시오. 클러스터에서는 이 명령을 사용할 수 없습니다.
SPARC: 클러스터에서 Oracle Parallel Server 또는 Oracle Real Application Clusters를 실행하는 경우 데이터베이스 인스턴스를 모두 종료합니다.
종료 절차에 대한 내용은 Oracle Parallel Server 또는 Oracle Real Application Clusters 제품 설명서를 참조하십시오.
종료하려면 클러스터 노드에서 수퍼유저로 로그인합니다.
종료하는 노드에서 모든 자원 그룹, 자원 및 장치 그룹을 다른 클러스터 구성원으로 전환합니다.
종료할 노드에서 다음 명령을 입력하십시오.
# scswitch -S -h node |
지정된 노드에서 모든 장치 서비스 및 자원 그룹을 제거합니다.
전환할 자원 그룹 및 장치 그룹이 있는 노드를 지정합니다.
클러스터 노드를 종료합니다.
종료할 노드에서 다음 명령을 입력하십시오.
# shutdown -g0 -y -i0 |
클러스터 노드가 Current Boot Parameters 화면의 ok 프롬프트나 Select (b)oot or (i)nterpreter 프롬프트를 표시하는지 확인합니다.
필요한 경우 노드의 전원을 끕니다.
다음 예는 노드 phys-schost-1을 시스템 종료할 때의 콘솔 출력을 보여줍니다여기서 -g0 옵션을 사용하면 천천히 종료되는 시간이 0으로 설정되고, -y 옵션을 사용하면 묻는 메시지에 자동으로 yes로 답하고, -i0 옵션을 사용하면 실행 수준 0을 호출합니다. 이 노드의 종료 메시지가 클러스터에 있는 다른 노드의 콘솔에 나타납니다.
# scswitch -S -h phys-schost-1 # shutdown -g0 -y -i0 Wed Mar 10 13:47:32 phys-schost-1 cl_runtime: WARNING: CMM monitoring disabled. phys-schost-1# INIT: New run level: 0 The system is coming down. Please wait. Notice: rgmd is being stopped. Notice: rpc.pmfd is being stopped. Notice: rpc.fed is being stopped. umount: /global/.devices/node@1 busy umount: /global/phys-schost-1 busy The system is down. syncing file systems... done Program terminated ok |
다음 예는 노드 phys-schost-1을 시스템 종료할 때의 콘솔 출력을 보여줍니다여기서 -g0 옵션을 사용하면 천천히 종료되는 시간이 0으로 설정되고, -y 옵션을 사용하면 묻는 메시지에 자동으로 yes로 답하고, -i0 옵션을 사용하면 실행 수준 0을 호출합니다. 이 노드의 종료 메시지가 클러스터에 있는 다른 노드의 콘솔에 나타납니다.
# scswitch -S -h phys-schost-1 # shutdown -g0 -y -i0 Shutdown started. Wed Mar 10 13:47:32 PST 2004 Changing to init state 0 - please wait Broadcast Message from root (console) on phys-schost-1 Wed Mar 10 13:47:32... THE SYSTEM phys-schost-1 IS BEING SHUT DOWN NOW ! ! ! Log off now or risk your files being damaged phys-schost-1# INIT: New run level: 0 The system is coming down. Please wait. System services are now being stopped. /etc/rc0.d/K05initrgm: Calling scswitch -S (evacuate) failfasts disabled on node 1 Print services already stopped. Mar 10 13:47:44 phys-schost-1 syslogd: going down on signal 15 umount: /global/.devices/node@2 busy umount: /global/.devices/node@1 busy The system is down. syncing file systems... done WARNING: CMM: Node being shut down. Type any key to continue |
종료된 클러스터 노드를 다시 시작하려면 클러스터 노드를 부트하는 방법을 참조하십시오.
클러스터의 다른 활성 노드를 종료하거나 재부트하려면 부트 중인 노드가 로그인 프롬프트에 도달할 때까지 기다리십시오. 그렇지 않으면 종료하거나 재부트하는 클러스터의 다른 노드에서 서비스를 인계할 수 없습니다.
쿼럼 구성에 따라 클러스터 노드 시작 방법이 달라질 수 있습니다. 두 개의 노드로 구성된 클러스터에서는 클러스터의 총 쿼럼 수가 3이 되도록 쿼럼 장치가 구성되어야 합니다. 즉, 각 노드에 대한 쿼럼 수가 하나씩 구성되고 쿼럼 장치에 대한 쿼럼 수 하나가 구성되어야 합니다. 이러한 경우에 첫 번째 노드가 종료되면 두 번째 노드가 계속 쿼럼 자격을 갖고 단일 클러스터 구성원으로 실행됩니다. 첫 번째 노드가 다시 클러스터에 포함되어 클러스터 노드로 실행되려면 두 번째 노드가 계속 실행되고 있어야 합니다. 또한 필요한 쿼럼 수(2)가 유지되어야 합니다.
종료된 클러스터 노드를 시작하려면 노드를 부트합니다.
SPARC:
ok boot |
x86:
<<< Current Boot Parameters >>> Boot path: /pci@0,0/pci8086,2545@3/pci8086,1460@1d/pci8086,341a@7,1/ sd@0,0:a Boot args: Type b [file-name] [boot-flags] <ENTER> to boot with options or i <ENTER> to enter boot interpreter or <ENTER> to boot with defaults <<< timeout in 5 seconds >>> Select (b)oot or (i)nterpreter: b |
클러스터 구성 요소가 활성화되면 부트된 노드의 콘솔에 메시지가 나타납니다.
클러스터 멤버쉽을 얻으려면 클러스터 노드에 클러스터 상호 연결에 대하여 작동하는 연결이 있어야 합니다.
노드가 오류 없이 부트되고 온라인 상태인지 확인합니다.
scstat 명령은 노드 상태를 보고합니다.
# scstat -n |
클러스터 노드의 /var 파일 시스템이 모두 차면 해당 노드에서 Sun Cluster를 다시 시작하지 못할 수도 있습니다. 이런 문제가 발생하면 완전히 찬 /var 파일 시스템을 복구하는 방법을 참조하십시오.
다음 예는 phys-schost-1 노드를 클러스터로 부트할 때 표시되는 콘솔 출력입니다.
ok boot Rebooting with command: boot ... Hostname: phys-schost-1 Booting as part of a cluster ... NOTICE: Node phys-schost-1: attempting to join cluster ... NOTICE: Node phys-schost-1: joined cluster ... The system is coming up. Please wait. checking ufs filesystems ... reservation program successfully exiting Print services started. volume management starting. The system is ready. phys-schost-1 console login: |
다음 예는 phys-schost-1 노드를 클러스터로 부트할 때 표시되는 콘솔 출력입니다.
<<< Current Boot Parameters >>> Boot path: /pci@0,0/pci8086,2545@3/pci8086,1460@1d/pci8086,341a@7,1/sd@0,0:a Boot args: Type b [file-name] [boot-flags] <ENTER> to boot with options or i <ENTER> to enter boot interpreter or <ENTER> to boot with defaults <<< timeout in 5 seconds >>> Select (b)oot or (i)nterpreter: Size: 276915 + 22156 + 150372 Bytes /platform/i86pc/kernel/unix loaded - 0xac000 bytes used SunOS Release 5.9 Version on81-feature-patch:08/30/2003 32-bit Copyright 1983-2003 Sun Microsystems, Inc. All rights reserved. Use is subject to license terms. configuring IPv4 interfaces: e1000g2. Hostname: phys-schost-1 Booting as part of a cluster NOTICE: CMM: Node phys-schost-1 (nodeid = 1) with votecount = 1 added. NOTICE: CMM: Node phys-schost-2 (nodeid = 2) with votecount = 1 added. NOTICE: CMM: Quorum device 1 (/dev/did/rdsk/d1s2) added; votecount = 1, bitmask of nodes with configured paths = 0x3. WARNING: CMM: Initialization for quorum device /dev/did/rdsk/d1s2 failed with error EACCES. Will retry later. NOTICE: clcomm: Adapter e1000g3 constructed NOTICE: clcomm: Path phys-schost-1:e1000g3 - phys-schost-2:e1000g3 being constructed NOTICE: clcomm: Path phys-schost-1:e1000g3 - phys-schost-2:e1000g3 being initiated NOTICE: clcomm: Path phys-schost-1:e1000g3 - phys-schost-2:e1000g3 online NOTICE: clcomm: Adapter e1000g0 constructed NOTICE: clcomm: Path phys-schost-1:e1000g0 - phys-schost-2:e1000g0 being constructed NOTICE: CMM: Node phys-schost-1: attempting to join cluster. WARNING: CMM: Reading reservation keys from quorum device /dev/did/rdsk/d1s2 failed with error 2. NOTICE: CMM: Cluster has reached quorum. NOTICE: CMM: Node phys-schost-1 (nodeid = 1) is up; new incarnation number = 1068503958. NOTICE: CMM: Node phys-schost-2 (nodeid = 2) is up; new incarnation number = 1068496374. NOTICE: CMM: Cluster members: phys-schost-1 phys-schost-2. NOTICE: CMM: node reconfiguration #3 completed. NOTICE: CMM: Node phys-schost-1: joined cluster. NOTICE: clcomm: Path phys-schost-1:e1000g0 - phys-schost-2:e1000g0 being initiated NOTICE: clcomm: Path phys-schost-1:e1000g0 - phys-schost-2:e1000g0 online NOTICE: CMM: Retry of initialization for quorum device /dev/did/rdsk/d1s2 was successful. WARNING: mod_installdrv: no major number for rsmrdt ip: joining multicasts failed (18) on clprivnet0 - will use link layer broadcasts for multicast The system is coming up. Please wait. checking ufs filesystems /dev/rdsk/c1t0d0s5: is clean. NIS domain name is dev.eng.mycompany.com starting rpc services: rpcbind keyserv ypbind done. Setting netmask of e1000g2 to 192.168.255.0 Setting netmask of e1000g3 to 192.168.255.128 Setting netmask of e1000g0 to 192.168.255.128 Setting netmask of clprivnet0 to 192.168.255.0 Setting default IPv4 interface for multicast: add net 224.0/4: gateway phys-schost-1 syslog service starting. obtaining access to all attached disks ***************************************************************************** * * The X-server can not be started on display :0... * ***************************************************************************** volume management starting. Starting Fault Injection Server... The system is ready. phys-schost-1 console login: |
클러스터의 다른 활성 노드를 종료하거나 재부트하려면 부트하려는 노드가 로그인 프롬프트에 도달할 때까지 기다리십시오. 그렇지 않으면 종료하거나 재부트하는 클러스터의 다른 노드에서 서비스를 인계할 수 없습니다.
SPARC: 클러스터 노드에서 Oracle Parallel Server 또는 Oracle Real Application Clusters를 실행하는 경우 데이터베이스 인스턴스를 모두 종료합니다.
종료 절차에 대한 내용은 Oracle Parallel Server 또는 Oracle Real Application Clusters 제품 설명서를 참조하십시오.
종료하려면 클러스터 노드에서 수퍼유저로 로그인합니다.
scswitch 및 shutdown 명령을 사용하여 클러스터 노드를 종료합니다.
종료할 노드에서 다음 명령을 입력하십시오. shutdown 명령에 -i 6 옵션을 사용하면 노드가 종료된 후 재부트됩니다.
# scswitch -S -h node # shutdown -g0 -y -i6 |
클러스터 멤버쉽을 얻으려면 클러스터 노드가 현재 클러스터 상호 연결에 연결되어 있어야 합니다.
노드가 오류 없이 부트되고 온라인 상태인지 확인합니다.
# scstat -n |
다음은 phys-schost-1 노드를 재부트할 때 표시되는 콘솔 출력의 예입니다. 이 노드의 종료와 시작을 알리는 메시지가 클러스터에 있는 다른 노드의 콘솔에도 표시됩니다.
# scswitch -S -h phys-schost-1 # shutdown -g0 -y -i6 Shutdown started. Wed Mar 10 13:47:32 phys-schost-1 cl_runtime: WARNING: CMM monitoring disabled. phys-schost-1# INIT: New run level: 6 The system is coming down. Please wait. System services are now being stopped. Notice: rgmd is being stopped. Notice: rpc.pmfd is being stopped. Notice: rpc.fed is being stopped. umount: /global/.devices/node@1 busy umount: /global/phys-schost-1 busy The system is down. syncing file systems... done rebooting... Resetting ... ,,, Sun Ultra 1 SBus (UltraSPARC 143MHz), No Keyboard OpenBoot 3.11, 128 MB memory installed, Serial #5932401. Ethernet address 8:8:20:99:ab:77, Host ID: 8899ab77. ... Rebooting with command: boot ... Hostname: phys-schost-1 Booting as part of a cluster ... NOTICE: Node phys-schost-1: attempting to join cluster ... NOTICE: Node phys-schost-1: joined cluster ... The system is coming up. Please wait. The system is ready. phys-schost-1 console login: |
다음은 phys-schost-1 노드를 재부트할 때 표시되는 콘솔 출력의 예입니다. 이 노드의 종료와 시작을 알리는 메시지가 클러스터에 있는 다른 노드의 콘솔에도 표시됩니다.
# scswitch -S -h phys-schost-1 # shutdown -g0 -y -i6 Shutdown started. Wed Mar 10 13:47:32 PST 2004 Changing to init state 6 - please wait Broadcast Message from root (console) on phys-schost-1 Wed Mar 10 13:47:32... THE SYSTEM phys-schost-1 IS BEING SHUT DOWN NOW ! ! ! Log off now or risk your files being damaged phys-schost-1# INIT: New run level: 6 The system is coming down. Please wait. System services are now being stopped. /etc/rc0.d/K05initrgm: Calling scswitch -S (evacuate) Print services already stopped. Mar 10 13:47:44 phys-schost-1 syslogd: going down on signal 15 umount: /global/.devices/node@2 busy umount: /global/.devices/node@1 busy The system is down. syncing file systems... done WARNING: CMM: Node being shut down. rebooting... ATI RAGE SDRAM BIOS P/N GR-xlint.007-4.330 * BIOS Lan-Console 2.0 Copyright (C) 1999-2001 Intel Corporation MAC ADDR: 00 02 47 31 38 3C AMIBIOS (C)1985-2002 American Megatrends Inc., Copyright 1996-2002 Intel Corporation SCB20.86B.1064.P18.0208191106 SCB2 Production BIOS Version 2.08 BIOS Build 1064 2 X Intel(R) Pentium(R) III CPU family 1400MHz Testing system memory, memory size=2048MB 2048MB Extended Memory Passed 512K L2 Cache SRAM Passed ATAPI CD-ROM SAMSUNG CD-ROM SN-124 Press <F2> to enter SETUP, <F12> Network Adaptec AIC-7899 SCSI BIOS v2.57S4 (c) 2000 Adaptec, Inc. All Rights Reserved. Press <Ctrl><A> for SCSISelect(TM) Utility! Ch B, SCSI ID: 0 SEAGATE ST336605LC 160 SCSI ID: 1 SEAGATE ST336605LC 160 SCSI ID: 6 ESG-SHV SCA HSBP M18 ASYN Ch A, SCSI ID: 2 SUN StorEdge 3310 160 SCSI ID: 3 SUN StorEdge 3310 160 AMIBIOS (C)1985-2002 American Megatrends Inc., Copyright 1996-2002 Intel Corporation SCB20.86B.1064.P18.0208191106 SCB2 Production BIOS Version 2.08 BIOS Build 1064 2 X Intel(R) Pentium(R) III CPU family 1400MHz Testing system memory, memory size=2048MB 2048MB Extended Memory Passed 512K L2 Cache SRAM Passed ATAPI CD-ROM SAMSUNG CD-ROM SN-124 SunOS - Intel Platform Edition Primary Boot Subsystem, vsn 2.0 Current Disk Partition Information Part# Status Type Start Length ================================================ 1 Active X86 BOOT 2428 21852 2 SOLARIS 24280 71662420 3 <unused> 4 <unused> Please select the partition you wish to boot: * * Solaris DCB loading /solaris/boot.bin SunOS Secondary Boot version 3.00 Solaris Intel Platform Edition Booting System Autobooting from bootpath: /pci@0,0/pci8086,2545@3/pci8086,1460@1d/ pci8086,341a@7,1/sd@0,0:a If the system hardware has changed, or to boot from a different device, interrupt the autoboot process by pressing ESC. Press ESCape to interrupt autoboot in 2 seconds. Initializing system Please wait... Warning: Resource Conflict - both devices are added NON-ACPI device: ISY0050 Port: 3F0-3F5, 3F7; IRQ: 6; DMA: 2 ACPI device: ISY0050 Port: 3F2-3F3, 3F4-3F5, 3F7; IRQ: 6; DMA: 2 <<< Current Boot Parameters >>> Boot path: /pci@0,0/pci8086,2545@3/pci8086,1460@1d/pci8086,341a@7,1/ sd@0,0:a Boot args: Type b [file-name] [boot-flags] <ENTER> to boot with options or i <ENTER> to enter boot interpreter or <ENTER> to boot with defaults <<< timeout in 5 seconds >>> Select (b)oot or (i)nterpreter: Size: 276915 + 22156 + 150372 Bytes /platform/i86pc/kernel/unix loaded - 0xac000 bytes used SunOS Release 5.9 Version on81-feature-patch:08/30/2003 32-bit Copyright 1983-2003 Sun Microsystems, Inc. All rights reserved. Use is subject to license terms. configuring IPv4 interfaces: e1000g2. Hostname: phys-schost-1 Booting as part of a cluster NOTICE: CMM: Node phys-schost-1 (nodeid = 1) with votecount = 1 added. NOTICE: CMM: Node phys-schost-2 (nodeid = 2) with votecount = 1 added. NOTICE: CMM: Quorum device 1 (/dev/did/rdsk/d1s2) added; votecount = 1, bitmask of nodes with configured paths = 0x3. WARNING: CMM: Initialization for quorum device /dev/did/rdsk/d1s2 failed with error EACCES. Will retry later. NOTICE: clcomm: Adapter e1000g3 constructed NOTICE: clcomm: Path phys-schost-1:e1000g3 - phys-schost-2:e1000g3 being constructed NOTICE: clcomm: Path phys-schost-1:e1000g3 - phys-schost-2:e1000g3 being initiated NOTICE: clcomm: Path phys-schost-1:e1000g3 - phys-schost-2:e1000g3 online NOTICE: clcomm: Adapter e1000g0 constructed NOTICE: clcomm: Path phys-schost-1:e1000g0 - phys-schost-2:e1000g0 being constructed NOTICE: CMM: Node phys-schost-1: attempting to join cluster. WARNING: CMM: Reading reservation keys from quorum device /dev/did/rdsk/d1s2 failed with error 2. NOTICE: CMM: Cluster has reached quorum. NOTICE: CMM: Node phys-schost-1 (nodeid = 1) is up; new incarnation number = 1068503958. NOTICE: CMM: Node phys-schost-2 (nodeid = 2) is up; new incarnation number = 1068496374. NOTICE: CMM: Cluster members: phys-schost-1 phys-schost-2. NOTICE: CMM: node reconfiguration #3 completed. NOTICE: CMM: Node phys-schost-1: joined cluster. NOTICE: clcomm: Path phys-schost-1:e1000g0 - phys-schost-2:e1000g0 being initiated NOTICE: clcomm: Path phys-schost-1:e1000g0 - phys-schost-2:e1000g0 online NOTICE: CMM: Retry of initialization for quorum device /dev/did/rdsk/d1s2 was successful. WARNING: mod_installdrv: no major number for rsmrdt ip: joining multicasts failed (18) on clprivnet0 - will use link layer broadcasts for multicast The system is coming up. Please wait. checking ufs filesystems /dev/rdsk/c1t0d0s5: is clean. NIS domain name is dev.eng.mycompany.com starting rpc services: rpcbind keyserv ypbind done. Setting netmask of e1000g2 to 192.168.255.0 Setting netmask of e1000g3 to 192.168.255.128 Setting netmask of e1000g0 to 192.168.255.128 Setting netmask of clprivnet0 to 192.168.255.0 Setting default IPv4 interface for multicast: add net 224.0/4: gateway phys-schost-1 syslog service starting. obtaining access to all attached disks ***************************************************************************** * * The X-server can not be started on display :0... * ***************************************************************************** volume management starting. Starting Fault Injection Server... The system is ready. phys-schost-1 console login: |
노드가 클러스터 구성원으로 참여하지 않도록 비클러스터 모드로 부트할 수 있습니다. 클러스터 소프트웨어를 설치하거나 노드 패치와 같은 특정 관리 절차를 수행할 경우에 비클러스터 모드를 사용할 수 있습니다.
비클러스터 모드로 시작할 클러스터 노드에서 수퍼유저로 로그인합니다.
scswitch 및 shutdown 명령을 사용하여 노드를 종료하십시오.
# scswitch -S -h node # shutdown -g0 -y -i0 |
노드가 Current Boot Parameters 화면의 ok 프롬프트나 Select (b)oot or (i)nterpreter 프롬프트를 나타내는지 확인합니다.
boot(1M) 또는 b 명령을 -x 옵션과 함께 사용하여 비클러스터 모드에서 노드를 부트합니다.
SPARC:
ok boot -x |
x86:
<<< Current Boot Parameters >>> Boot path: /pci@0,0/pci8086,2545@3/pci8086,1460@1d/pci8086,341a@7,1/ sd@0,0:a Boot args: Type b [file-name] [boot-flags] <ENTER> to boot with options or i <ENTER> to enter boot interpreter or <ENTER> to boot with defaults <<< timeout in 5 seconds >>> Select (b)oot or (i)nterpreter: b -x |
노드가 클러스터에 포함되지 않았음을 나타내는 메시지가 노드 콘솔에 나타납니다.
다음은 phys-schost-1 노드를 종료한 다음 비클러스터 모드로 노드를 다시 시작할 때 표시되는 콘솔 출력의 예입니다. 여기서 -g0 옵션을 사용하면 천천히 종료되는 시간이 0으로 설정되고, -y 옵션을 사용하면 묻는 메시지에 자동으로 yes로 답하고, -i0 옵션을 사용하면 실행 수준 0을 호출합니다. 이 노드의 종료 메시지가 클러스터에 있는 다른 노드의 콘솔에 나타납니다.
# scswitch -S -h phys-schost-1 # shutdown -g0 -y -i0 Shutdown started. Wed Mar 10 13:47:32 phys-schost-1 cl_runtime: WARNING: CMM monitoring disabled. phys-schost-1# ... rg_name = schost-sa-1 ... offline node = phys-schost-2 ... num of node = 0 ... phys-schost-1# INIT: New run level: 0 The system is coming down. Please wait. System services are now being stopped. Print services stopped. syslogd: going down on signal 15 ... The system is down. syncing file systems... done WARNING: node phys-schost-1 is being shut down. Program terminated ok boot -x ... Not booting as part of cluster ... The system is ready. phys-schost-1 console login: |
다음은 phys-schost-1 노드를 종료한 다음 비클러스터 모드로 노드를 다시 시작할 때 표시되는 콘솔 출력의 예입니다. 여기서 -g0 옵션을 사용하면 천천히 종료되는 시간이 0으로 설정되고, -y 옵션을 사용하면 묻는 메시지에 자동으로 yes로 답하고, -i0 옵션을 사용하면 실행 수준 0을 호출합니다. 이 노드의 종료 메시지가 클러스터에 있는 다른 노드의 콘솔에 나타납니다.
# scswitch -S -h phys-schost-1 # shutdown -g0 -y -i0 Shutdown started. Wed Mar 10 13:47:32 PST 2004 phys-schost-1# INIT: New run level: 0 The system is coming down. Please wait. System services are now being stopped. Print services already stopped. Mar 10 13:47:44 phys-schost-1 syslogd: going down on signal 15 ... The system is down. syncing file systems... done WARNING: CMM: Node being shut down. Type any key to continue ATI RAGE SDRAM BIOS P/N GR-xlint.007-4.330 * BIOS Lan-Console 2.0 Copyright (C) 1999-2001 Intel Corporation MAC ADDR: 00 02 47 31 38 3C AMIBIOS (C)1985-2002 American Megatrends Inc., Copyright 1996-2002 Intel Corporation SCB20.86B.1064.P18.0208191106 SCB2 Production BIOS Version 2.08 BIOS Build 1064 2 X Intel(R) Pentium(R) III CPU family 1400MHz Testing system memory, memory size=2048MB 2048MB Extended Memory Passed 512K L2 Cache SRAM Passed ATAPI CD-ROM SAMSUNG CD-ROM SN-124 Press <F2> to enter SETUP, <F12> Network Adaptec AIC-7899 SCSI BIOS v2.57S4 (c) 2000 Adaptec, Inc. All Rights Reserved. Press <Ctrl><A> for SCSISelect(TM) Utility! Ch B, SCSI ID: 0 SEAGATE ST336605LC 160 SCSI ID: 1 SEAGATE ST336605LC 160 SCSI ID: 6 ESG-SHV SCA HSBP M18 ASYN Ch A, SCSI ID: 2 SUN StorEdge 3310 160 SCSI ID: 3 SUN StorEdge 3310 160 AMIBIOS (C)1985-2002 American Megatrends Inc., Copyright 1996-2002 Intel Corporation SCB20.86B.1064.P18.0208191106 SCB2 Production BIOS Version 2.08 BIOS Build 1064 2 X Intel(R) Pentium(R) III CPU family 1400MHz Testing system memory, memory size=2048MB 2048MB Extended Memory Passed 512K L2 Cache SRAM Passed ATAPI CD-ROM SAMSUNG CD-ROM SN-124 SunOS - Intel Platform Edition Primary Boot Subsystem, vsn 2.0 Current Disk Partition Information Part# Status Type Start Length ================================================ 1 Active X86 BOOT 2428 21852 2 SOLARIS 24280 71662420 3 <unused> 4 <unused> Please select the partition you wish to boot: * * Solaris DCB loading /solaris/boot.bin SunOS Secondary Boot version 3.00 Solaris Intel Platform Edition Booting System Autobooting from bootpath: /pci@0,0/pci8086,2545@3/pci8086,1460@1d/ pci8086,341a@7,1/sd@0,0:a If the system hardware has changed, or to boot from a different device, interrupt the autoboot process by pressing ESC. Press ESCape to interrupt autoboot in 2 seconds. Initializing system Please wait... Warning: Resource Conflict - both devices are added NON-ACPI device: ISY0050 Port: 3F0-3F5, 3F7; IRQ: 6; DMA: 2 ACPI device: ISY0050 Port: 3F2-3F3, 3F4-3F5, 3F7; IRQ: 6; DMA: 2 <<< Current Boot Parameters >>> Boot path: /pci@0,0/pci8086,2545@3/pci8086,1460@1d/pci8086,341a@7,1/ sd@0,0:a Boot args: Type b [file-name] [boot-flags] <ENTER> to boot with options or i <ENTER> to enter boot interpreter or <ENTER> to boot with defaults <<< timeout in 5 seconds >>> Select (b)oot or (i)nterpreter: b -x ... Not booting as part of cluster ... The system is ready. phys-schost-1 console login: |