Sun Cluster 系统管理指南(适用于 Solaris OS)

Procedure如何查看群集配置

您还可以使用 SunPlex Manager GUI 来完成此过程。有关详细信息,请参阅 SunPlex Manager 的联机帮助。

执行此步骤不需要作为超级用户登录。

步骤

    查看群集配置


    % scconf -p
    

    要使用 scconf 命令显示详细信息,请使用冗余选项。有关详细信息,请参见 scconf(1M) 手册页。


示例 1–6 查看群集配置

以下示例列出了群集配置。


% scconf -p
Cluster name:                       cluster-1
Cluster ID:                         0x3908EE1C
Cluster install mode:               disabled
Cluster private net:                172.16.0.0
Cluster private netmask:            192.168.0.0
Cluster new node authentication:    unix
Cluster new node list:              <NULL - Allow any node>
Cluster nodes:                      phys-schost-1 phys-schost-2 phys-schost-3
phys-schost-4
Cluster node name:                                 phys-schost-1
  Node ID:                                         1
  Node enabled:                                    yes
  Node private hostname:                           clusternode1-priv
  Node quorum vote count:                          1
  Node reservation key:                            0x3908EE1C00000001
  Node transport adapters:                         hme1 qfe1 qfe2
 
Node transport adapter:                          hme1
    Adapter enabled:                               yes
    Adapter transport type:                        dlpi
    Adapter property:                              device_name=hme
    Adapter property:                              device_instance=1
    Adapter property:                              dlpi_heartbeat_timeout=10000
...
Cluster transport junctions:                       hub0 hub1 hub2
 
Cluster transport junction:                        hub0
  Junction enabled:                                yes
  Junction type:                                   switch
  Junction port names:                             1 2 3 4
...
Junction port:                                   1
    Port enabled:                                  yes
 
Junction port:                                   2
    Port enabled:                                  yes
...
Cluster transport cables
                    Endpoint            Endpoint        State
                    --------            --------        -----
  Transport cable:  phys-schost-1:hme1@0 hub0@1        Enabled
  Transport cable:  phys-schost-1:qfe1@0 hub1@1        Enabled
  Transport cable:  phys-schost-1:qfe2@0 hub2@1        Enabled
  Transport cable:  phys-schost-2:hme1@0 hub0@2        Enabled
...
Quorum devices:                                    d2 d8
 
Quorum device name:                                d2
  Quorum device votes:                             1
  Quorum device enabled:                           yes
  Quorum device name:                              /dev/did/rdsk/d2s2
  Quorum device hosts (enabled):                   phys-schost-1
 phys-schost-2
  Quorum device hosts (disabled): 
...
Device group name:                                 schost-3
  Device group type:                               SVM
  Device group failback enabled:                   no
  Device group node list:                          phys-schost-3, phys-schost-4
  Diskset name:                                    schost-3