# # Copyright 2005 Sun Microsystems, Inc. All rights reserved. # Use is subject to license terms. # # This file will be sourced in by sczbt_register and the parameters # listed below will be used. # # These parameters can be customized in (key=value) form # # RS - Name of the resource # RG - Name of the resource group containing RS # PARAMETERDIR - Name of the parameter file direcrory # SC_NETWORK - Identfies if SUNW.LogicalHostname will be used # true = zone will use SUNW.LogicalHostname # false = zone will use it's own configuration # # The configuration of a zone's network addresses depends on # whether you require IPMP protection or protection against # the failure of all physical interfaces. # # If you require only IPMP protection, configure the zone's # addresses by using the zonecfg utility and then place the # zone's address in an IPMP group. # # To configure this option set # SC_NETWORK=false # SC_LH= # # If IPMP protection is not required, just configure the # zone's addresses by using the zonecfg utility. # # To configure this option set # SC_NETWORK=false # SC_LH= # # If you require protection against the failure of all physical # interfaces, choose one option from the following list. # # - If you want the SUNW.LogicalHostName resource type to manage # the zone's addresses, configure a SUNW.LogicalHostName # resource with at least one of the zone's addresses. # # To configure this option set # SC_NETWORK=true # SC_LH=<Name of the SC Logical Hostname resource> # # - Otherwise, configure the zone's addresses by using the # zonecfg utility and configure a redundant IP address # for use by a SUNW.LogicalHostName resource. # # To configure this option set # SC_NETWORK=false # SC_LH=<Name of the SC Logical Hostname resource> # # Whichever option is chosen, multiple zone addresses can be # used either in the zone's configuration or using several # SUNW.LogicalHostname resources. # # e.g. SC_NETWORK=true # SC_LH=zone1-lh1,zone1-lh2 # # SC_LH - Name of the SC Logical Hostname resource # FAILOVER - Identifies if the zone's zone path is on a # highly available local file system # # e.g. FAILOVER=true - highly available local file system # FAILOVER=false - local file system # # HAS_RS - Name of the HAStoragePlus SC resource # RS= RG= PARAMETERDIR= SC_NETWORK= SC_LH= FAILOVER= HAS_RS= # # The following variable will be placed in the parameter file # # Parameters for sczbt (Zone Boot) # # Zonename Name of the zone # Zonebootopt Zone boot options # Milestone SMF Milestone which needs to be online # before the zone is considered booted # # Note: Zonebootopt="-s" requires Milestone=single-user # Zonename= Zonebootopt= Milestone=multi-user-server |