In this example, the cluster-paris cluster is the primary and rawdg is the name of the device group that contains a raw device disk group, /dev/did/rdsk/d3.
This example has the following entries in /var/cluster/geo/avs/avsdg-volset.ini file:
logicalhost-paris-1 /dev/did/rdsk/d3s3 /dev/did/rdsk/d3s4 logicalhost-newyork-1 /dev/did/rdsk/d3s5 /dev/did/rdsk/d3s6 ip async g - C rawdg |
The rawdg-volset.ini file contains the following entries:
logicalhost-paris-1 is the primary host.
/dev/did/rdsk/d3s3 is the primary data.
/dev/did/rdsk/d3s4 is the primary bitmap.
logicalhost-newyork-1 is the secondary host.
/dev/did/rdsk/d3s5 is the secondary data.
/dev/did/rdsk/d3s6 is the secondary bitmap.
ip is the protocol.
async is the mode.
g is the G flag.
- is the IO group.
C is the C flag.
rawdg is the device group.
The sample configuration file defines a volume set that replicates d3s3 from cluster-paris to d3s5 on cluster-newyork. The volume set uses the bitmap volumes and logical hostnames that are specified in the file.