dhseqr
dhseqr - compute the eigenvalues of a real upper Hessenberg matrix H and, optionally, the matrices T and Z from the Schur decomposition H = Z T Z**T, where T is an upper quasi-triangular matrix (the Schur form), and Z is the orthogonal matrix of Schur vectors
SUBROUTINE DHSEQR( JOB, COMPZ, N, ILO, IHI, H, LDH, WR, WI, Z, LDZ,
* WORK, LWORK, INFO)
CHARACTER * 1 JOB, COMPZ
INTEGER N, ILO, IHI, LDH, LDZ, LWORK, INFO
DOUBLE PRECISION H(LDH,*), WR(*), WI(*), Z(LDZ,*), WORK(*)
SUBROUTINE DHSEQR_64( JOB, COMPZ, N, ILO, IHI, H, LDH, WR, WI, Z,
* LDZ, WORK, LWORK, INFO)
CHARACTER * 1 JOB, COMPZ
INTEGER*8 N, ILO, IHI, LDH, LDZ, LWORK, INFO
DOUBLE PRECISION H(LDH,*), WR(*), WI(*), Z(LDZ,*), WORK(*)
SUBROUTINE HSEQR( JOB, COMPZ, N, ILO, IHI, H, [LDH], WR, WI, Z, [LDZ],
* [WORK], [LWORK], [INFO])
CHARACTER(LEN=1) :: JOB, COMPZ
INTEGER :: N, ILO, IHI, LDH, LDZ, LWORK, INFO
REAL(8), DIMENSION(:) :: WR, WI, WORK
REAL(8), DIMENSION(:,:) :: H, Z
SUBROUTINE HSEQR_64( JOB, COMPZ, N, ILO, IHI, H, [LDH], WR, WI, Z,
* [LDZ], [WORK], [LWORK], [INFO])
CHARACTER(LEN=1) :: JOB, COMPZ
INTEGER(8) :: N, ILO, IHI, LDH, LDZ, LWORK, INFO
REAL(8), DIMENSION(:) :: WR, WI, WORK
REAL(8), DIMENSION(:,:) :: H, Z
#include <sunperf.h>
void dhseqr(char job, char compz, int n, int ilo, int ihi, double *h, int ldh, double *wr, double *wi, double *z, int ldz, int *info);
void dhseqr_64(char job, char compz, long n, long ilo, long ihi, double *h, long ldh, double *wr, double *wi, double *z, long ldz, long *info);
dhseqr computes the eigenvalues of a real upper Hessenberg matrix H
and, optionally, the matrices T and Z from the Schur decomposition
H = Z T Z**T, where T is an upper quasi-triangular matrix (the Schur
form), and Z is the orthogonal matrix of Schur vectors.
Optionally Z may be postmultiplied into an input orthogonal matrix Q,
so that this routine can give the Schur factorization of a matrix A
which has been reduced to the Hessenberg form H by the orthogonal
matrix Q: A = Q*H*Q**T = (QZ)*T*(QZ)**T.
-
* JOB (input)
-
-
* COMPZ (input)
-
-
* N (input)
-
The order of the matrix H. N >= 0.
-
* ILO (input)
-
It is assumed that H is already upper triangular in rows
and columns 1:ILO-1 and IHI+1:N. ILO and IHI are normally
set by a previous call to SGEBAL, and then passed to SGEHRD
when the matrix output by SGEBAL is reduced to Hessenberg
form. Otherwise ILO and IHI should be set to 1 and N
respectively.
1 <= ILO <= IHI <= N, if N > 0; ILO=1 and IHI=0, if N=0.
-
* IHI (input)
-
See the description of ILO.
-
* H (input/output)
-
On entry, the upper Hessenberg matrix H.
On exit, if JOB = 'S', H contains the upper quasi-triangular
matrix T from the Schur decomposition (the Schur form);
2-by-2 diagonal blocks (corresponding to complex conjugate
pairs of eigenvalues) are returned in standard form, with
H(i,i) = H(i+1,i+1) and H(i+1,i)*H(i,i+1) < 0. If JOB = 'E',
the contents of H are unspecified on exit.
-
* LDH (input)
-
The leading dimension of the array H. LDH >= max(1,N).
-
* WR (output)
-
The real and imaginary parts, respectively, of the computed
eigenvalues. If two eigenvalues are computed as a complex
conjugate pair, they are stored in consecutive elements of
WR and WI, say the i-th and (i+1)th, with WI(i) > 0 and
WI(i+1) < 0. If JOB = 'S', the eigenvalues are stored in the
same order as on the diagonal of the Schur form returned in
H, with WR(i) = H(i,i) and, if H(i:i+1,i:i+1) is a 2-by-2
diagonal block, WI(i) = sqrt(H(i+1,i)*H(i,i+1)) and
WI(i+1) = -WI(i).
-
* WI (output)
-
See the description of WR.
-
* Z (input)
-
If COMPZ = 'N': Z is not referenced.
If COMPZ = 'I': on entry, Z need not be set, and on exit, Z
contains the orthogonal matrix Z of the Schur vectors of H.
If COMPZ = 'V': on entry Z must contain an N-by-N matrix Q,
which is assumed to be equal to the unit matrix except for
the submatrix Z(ILO:IHI,ILO:IHI); on exit Z contains Q*Z.
Normally Q is the orthogonal matrix generated by SORGHR after
the call to SGEHRD which formed the Hessenberg matrix H.
-
* LDZ (input)
-
The leading dimension of the array Z.
LDZ >= max(1,N) if COMPZ = 'I' or 'V'; LDZ >= 1 otherwise.
-
* WORK (workspace)
-
On exit, if INFO = 0, WORK(1) returns the optimal LWORK.
-
* LWORK (input)
-
The dimension of the array WORK. LWORK >= max(1,N).
If LWORK = -1, then a workspace query is assumed; the routine
only calculates the optimal size of the WORK array, returns
this value as the first entry of the WORK array, and no error
message related to LWORK is issued by XERBLA.
-
* INFO (output)
-