dstevx
dstevx - compute selected eigenvalues and, optionally, eigenvectors of a real symmetric tridiagonal matrix A
SUBROUTINE DSTEVX( JOBZ, RANGE, N, DIAG, OFFD, VL, VU, IL, IU,
* ABTOL, NFOUND, W, Z, LDZ, WORK, IWORK2, IFAIL, INFO)
CHARACTER * 1 JOBZ, RANGE
INTEGER N, IL, IU, NFOUND, LDZ, INFO
INTEGER IWORK2(*), IFAIL(*)
DOUBLE PRECISION VL, VU, ABTOL
DOUBLE PRECISION DIAG(*), OFFD(*), W(*), Z(LDZ,*), WORK(*)
SUBROUTINE DSTEVX_64( JOBZ, RANGE, N, DIAG, OFFD, VL, VU, IL, IU,
* ABTOL, NFOUND, W, Z, LDZ, WORK, IWORK2, IFAIL, INFO)
CHARACTER * 1 JOBZ, RANGE
INTEGER*8 N, IL, IU, NFOUND, LDZ, INFO
INTEGER*8 IWORK2(*), IFAIL(*)
DOUBLE PRECISION VL, VU, ABTOL
DOUBLE PRECISION DIAG(*), OFFD(*), W(*), Z(LDZ,*), WORK(*)
SUBROUTINE STEVX( JOBZ, RANGE, N, DIAG, OFFD, VL, VU, IL, IU, ABTOL,
* NFOUND, W, Z, [LDZ], [WORK], [IWORK2], IFAIL, [INFO])
CHARACTER(LEN=1) :: JOBZ, RANGE
INTEGER :: N, IL, IU, NFOUND, LDZ, INFO
INTEGER, DIMENSION(:) :: IWORK2, IFAIL
REAL(8) :: VL, VU, ABTOL
REAL(8), DIMENSION(:) :: DIAG, OFFD, W, WORK
REAL(8), DIMENSION(:,:) :: Z
SUBROUTINE STEVX_64( JOBZ, RANGE, N, DIAG, OFFD, VL, VU, IL, IU,
* ABTOL, NFOUND, W, Z, [LDZ], [WORK], [IWORK2], IFAIL, [INFO])
CHARACTER(LEN=1) :: JOBZ, RANGE
INTEGER(8) :: N, IL, IU, NFOUND, LDZ, INFO
INTEGER(8), DIMENSION(:) :: IWORK2, IFAIL
REAL(8) :: VL, VU, ABTOL
REAL(8), DIMENSION(:) :: DIAG, OFFD, W, WORK
REAL(8), DIMENSION(:,:) :: Z
#include <sunperf.h>
void dstevx(char jobz, char range, int n, double *diag, double *offd, double vl, double vu, int il, int iu, double abtol, int *nfound, double *w, double *z, int ldz, int *ifail, int *info);
void dstevx_64(char jobz, char range, long n, double *diag, double *offd, double vl, double vu, long il, long iu, double abtol, long *nfound, double *w, double *z, long ldz, long *ifail, long *info);
dstevx computes selected eigenvalues and, optionally, eigenvectors
of a real symmetric tridiagonal matrix A. Eigenvalues and
eigenvectors can be selected by specifying either a range of values
or a range of indices for the desired eigenvalues.
-
* JOBZ (input)
-
-
* RANGE (input)
-
-
* N (input)
-
The order of the matrix. N >= 0.
-
* DIAG (input/output)
-
On entry, the n diagonal elements of the tridiagonal matrix
A.
On exit, DIAG may be multiplied by a constant factor chosen
to avoid over/underflow in computing the eigenvalues.
-
* OFFD (input/output)
-
On entry, the (n-1) subdiagonal elements of the tridiagonal
matrix A in elements 1 to N-1 of OFFD; OFFD(N) need not be set.
On exit, OFFD may be multiplied by a constant factor chosen
to avoid over/underflow in computing the eigenvalues.
-
* VL (input)
-
If RANGE='V', the lower and upper bounds of the interval to
be searched for eigenvalues. VL < VU.
Not referenced if RANGE = 'A' or 'I'.
-
* VU (input)
-
See the description of VL.
-
* IL (input)
-
If RANGE='I', the indices (in ascending order) of the
smallest and largest eigenvalues to be returned.
1 <= IL <= IU <= N, if N > 0; IL = 1 and IU = 0 if N = 0.
Not referenced if RANGE = 'A' or 'V'.
-
* IU (input)
-
See the description of IL.
-
* ABTOL (input)
-
The absolute error tolerance for the eigenvalues.
An approximate eigenvalue is accepted as converged
when it is determined to lie in an interval [a,b]
of width less than or equal to
ABTOL + EPS * max( |a|,|b| ) ,
where EPS is the machine precision. If ABTOL is less
than or equal to zero, then EPS*|T| will be used in
its place, where |T| is the 1-norm of the tridiagonal
matrix.
Eigenvalues will be computed most accurately when ABTOL is
set to twice the underflow threshold 2*SLAMCH('S'), not zero.
If this routine returns with INFO>0, indicating that some
eigenvectors did not converge, try setting ABTOL to
2*SLAMCH('S').
See "Computing Small Singular Values of Bidiagonal Matrices
with Guaranteed High Relative Accuracy," by Demmel and
Kahan, LAPACK Working Note #3.
-
* NFOUND (output)
-
The total number of eigenvalues found. 0 <= NFOUND <= N.
If RANGE = 'A', NFOUND = N, and if RANGE = 'I', NFOUND = IU-IL+1.
-
* W (output)
-
The first NFOUND elements contain the selected eigenvalues in
ascending order.
-
* Z (input)
-
If JOBZ = 'V', then if INFO = 0, the first NFOUND columns of Z
contain the orthonormal eigenvectors of the matrix A
corresponding to the selected eigenvalues, with the i-th
column of Z holding the eigenvector associated with W(i).
If an eigenvector fails to converge (INFO > 0), then that
column of Z contains the latest approximation to the
eigenvector, and the index of the eigenvector is returned
in IFAIL. If JOBZ = 'N', then Z is not referenced.
Note: the user must ensure that at least max(1,NFOUND) columns are
supplied in the array Z; if RANGE = 'V', the exact value of NFOUND
is not known in advance and an upper bound must be used.
-
* LDZ (input)
-
The leading dimension of the array Z. LDZ >= 1, and if
JOBZ = 'V', LDZ >= max(1,N).
-
* WORK (workspace)
-
dimension(5*N)
-
* IWORK2 (workspace)
-
-
* IFAIL (output)
-
If JOBZ = 'V', then if INFO = 0, the first NFOUND elements of
IFAIL are zero. If INFO > 0, then IFAIL contains the
indices of the eigenvectors that failed to converge.
If JOBZ = 'N', then IFAIL is not referenced.
-
* INFO (output)
-