Run sm_config

Execute the sm_config command as root on the node that contains the sci_config.hpc file.

If possible, do this from a console terminal so you can see the output it generates. If this is not possible, examine the output in /var/adm/messages. The following example shows the output that would be generated for the four-node, nonstriped sample configuration shown in Figure 3-1.

Do not press Return when the sm_config output pauses. Go to the next section first.

# /opt/SUNWsma/bin/sm_config -f ../sci_config.hpc
For Host #0 (node3), adapter details :-
        Adp #0 :- serial no = 6148; bus slot = 0;
For Host #1 (node4), adapter details :
        Adp #0 :- serial no = 6520; bus slot = 0;
For Host #2 (node5), adapter details :
-        Adp #0 :- serial no = 6527; bus slot = 0;
For Host #3 (node6), adapter details :-
        Adp #0 :- serial no = 6269; bus slot = 0;
Press Return to continue: