Document Affected: “To Remove T3 Device Configuration” in Sun Management Center 3.5 Installation and Configuration Guide

The title of the section, To Remove T3 Device Configuration, located in the“Preparing Systems for Sun Management Center Upgrade and Installation” in Sun Management Center 3.5 Installation and Configuration Guide has been changed. The procedural information has also changed. The following is the updated procedure:

Uninstalling T3 Storage Devices

If you are running Sun Management Center 3.5, you must remove the T3 device configuration from Sun Management Center 3.5 if you are going to perform any of the following functions:

• Remove the T3 storage device.

• Move the T3 storage device to another machine.

• Assign a different IP or Ethernet address to the T3 storage device.

• Migrate the Sun Management Center server to a different machine.

• Uninstall the Monitoring and Management of A5x00 and T3 Devices add-on product.

• Uninstall Sun Management Center 3.5

If you uninstall the Monitoring and Management of A5x00 and T3 Devices add-on product without first removing the T3 device configuration, you can remove the T3 device configuration as described in the following procedure.

To Remove T3 Device Configuration

1. Log in as root on the machine where the Monitoring and Management of A5x00 and T3 Devices add-on product is installed.

2. Type the command /opt/SUNWsymon/es-stop -a to stop the Sun Management Center agent.

3. Run the pre-uninstall script to remove T3 device configuration information.

   1. Type the command /opt/SUNWsymon/addons/storage/sbin/pre-uninst.sh.

   2. When asked if you want to stop the T3 from sending syslog messages, type y.

   3. You are then prompted for the root password for the T3 device. Type the password.

      You are notified that the T3 device has been removed from the T3 module.

4. Uninstall the add-on product.

   See “To Uninstall Sun Management Center 3.5 Using” in Sun Management Center 3.5 Installation and Configuration Guide.