Sun Management Center Integration Package Installation

The following three components are needed for the Sun Management Center Integration package for Unicenter release:

• EventAdaptor component:

  SUNWescaa – Installed on a host that has the Sun Management Center console installed. There should only be one event adapter for each Sun Management Center server.

• TNG server component:

  SUNWescas – Installed on the machine that has the Unicenter TNG WorldView.

  SUNWescad – Installed on the machine that has Unicenter TNG DSM and Unicenter TNG running.

• HostDetails bean component:

SUNWescah – Installed on any machine that has the Sun Management Center console layer and web browser. This should be the machine running Unicenter TNG WorldView, from within which you can view the Sun Management Center console.

To Install the EventAdaptor Component

1. Become superuser.

2. Start the Sun Management Center installation process.

3. Select the console layer for installation. Select the Sun Management Center Integration for Unicenter TNG add-on.

4. When prompted, choose the Sun Management Center Integration for Unicenter TNG EventAdaptor Component for installation.

   The following files will be installed:

   • setup_sunmctotng, cfg_sunmctotng, and ea-start will be installed in the following directory:

     SunMC_base_directory/SunMC-TNG/sbin.

   • SunMcToTngAdaptorMain.cfg will be installed in the following directory:

     /var/opt/SUNWsymon/SunMC-TNG

5. After the installation, configure the cfg_sunmctotng default file by typing the following commands:

   # cd SunMC_base_directory/SunMC-TNG/sbin # ./cfg_sunmctotng

   When prompted, enter the appropriate information for your system for each of the following parameters:

   • Sun Management Center server name

   • Sun Management Center user name

   • Sun Management Center port number

   • Unicenter TNG server name

   • Unicenter TNG server DSM trap port number

   • Synchronizer Polling Interval, in seconds

   • Host Name Format: True Name [0], Short Name [1], IP Address [2]

The synchronizer checks the status of all connected agents. If the synchronizer recognizes a new module or a change in module status, the synchronizer notifies Unicenter TNG of the change. A value of 0 turns off the synchronizer function.

The host name format can be designated in one of the following ways:

• true name

• short name

• IP address

A true name is determined by the naming service being used, such as NIS+ or DNS. A true name is a host name that either includes or does not include the domain name, depending on the naming service. A short name is simply the host name without a domain name designation.

To Install the Unicenter TNG Server Component

1. Become superuser.

2. Start the Sun Management Center installation process.

3. Select the console layer for installation. Select the Sun Management Center Integration for Unicenter TNG add-on.

4. Choose the Sun Management Center Integration for Unicenter TNG Server Component for installation.

To Set Up Unicenter TNG Component

The Unicenter TNG server component of the add-on will be automatically set up when the Sun Management Center setup script is run. Refer to the Sun Management Center Installation and Configuration Guide for more information on the Sun Management Center setup procedure.

1. If you need to set up or re-set up the Unicenter TNG Component, type the following commands:

   # cd /SunMC_base_directory/SUNWsymon/sbin # ./es-setup -p TNG

   ---

   Note –

   At the end of the setup procedure, the following warning message might be displayed:

   SunMC_Agent.atp(32) : warning: #VERSION number does not include revision number (in format M.m.r). Revision will be ignored, this may lead to errors later.

   This warning message can be safely ignored.

   ---

To Install the HostDetails Component

The HostDetails component should be installed on a machine that is running Unicenter TNG WorldView, from which you can view the Sun Management Center console.

1. Become superuser.

2. Start the Sun Management Center installation process.

3. Select the console layer for installation. Select the Sun Management Center Integration for Unicenter TNG add-on.

4. Choose the Sun Management Center Integration for Unicenter TNG HostDetails Component for installation.

A file named HDMapping.properties is installed with the SUNWescah package under SunMC_base_directory classes. This file is used to directly map a Unicenter TNG host name to a Sun Management Center host name, when both applications are using the same host. You must edit this file if Unicenter TNG and Sun Management Center use different logical names for the same host, or if you add a new host to Unicenter TNG. For example:

# Property File: HDMapping.properties
# version: 1.2 	2000/04/04		15:52:16
# Copyright (c) Sun Microsystems, Inc. All Rights Reserved.

# Format Name = Aliases (Aliases should be unique for Name)

# HostNameInTng = HostAliasesInSunMC
seagull = hawk		

To Uninstall the Unicenter TNG Integration Add-On

To uninstall any of the components that are part of Sun Management Center Unicenter Integration add-on, complete the following steps:

1. Become superuser.

2. Change to the /opt/SUNWsymon/sbin directory.

   # cd /opt/SUNWsymon/sbin

3. Start the Sun Management Center uninstallation process.

   # ./es-uninst

4. Select the Sun Management Center Integration for Unicenter TNG for uninstallation.

Additional Help

For assistance with Unicenter TNG problems, refer to the Unicenter TNG User's Guide. Information about the Unicenter TNG User's Guide can be found at http://www.ca.com.

The online Sun Management Center release documentation can be found at http://www.sun.com/software/sunmanagementcenter.