When you press mouse button 3 on a system controller (SC) listed in the Platform Administration -> Slots -> SC table, the menu does not provide a power off option.
Workaround: Use the command-line interface (CLI) to power off the system controller.
When you press mouse button 3 on a power supply listed in the Platform Administration -> Slots -> Power Supply table, the menu does not provide a power on/power off option.
Workaround: Use the command-line interface (CLI) to power on or off the power supply.
The node names in the Platform Administration -> Slots -> CPU table and I/O Boards table are missing after a hot-plug operation.
Workaround: Use the Refresh button to refresh the table and display the correct values.
If you try a dynamic reconfiguration (DR) operation on the Sun Fire Link peripheral component interconnect (WPCI) Board in the DR module -> Attachment Points -> WPCI Board table, the status window does not show an error message that you cannot dynamically reconfigure that WPCI board.
Workaround: Use the command-line interface (CLI) to dynamically reconfigure the WPCI board.
If a logical Internet Protocol (IP) address is already set in the system controller using the setupplatform -p sc command, you need to use a logical IP address when you set up the system controller in the Platform Administration module. Otherwise, you see a black splat and all the tables in the Platform Administration module are empty.
Workaround: Use the showplatform -p sc command to check whether the system controller has a logical IP address already set. If so, set up the logical IP address for the system controller in the Platform Administration module.