Sun StorEdge A5x00 Packages

If you want to use the Sun StorEdge A5x00 module, you must install either the SUNWluxop or the SUNWluxox packages on the system where you install the Monitoring and Management of A5x00 and T3 Devices add-on product. If you load the A5x00 module and the packages are not installed on the system, the Sun Management Center agent cannot run. .

To check whether the packages are installed, type the following command:

# pkginfo SUNWluxop SUNWluxox

If the packages are installed, the following lines are displayed:

system  SUNWluxop  Sun Enterprise Network Array firmware and utilities
system  SUNWluxox  Sun Enterprise Network Array libraries (64-bit)

If you need either package, you can download the package from http://sunsolve.sun.com. Make sure that you download the latest revision. Use the pkgadd(1M) command to install the packages.