Removing T3 Device Configuration If Present

Uninstalling T3 Storage Devices

If you are running Sun Management Center, you must remove the T3 device configuration from Sun Management Center if you are going to perform any of the following functions:

• Remove the T3 storage device

• Move the T3 storage device to another machine

• Assign a different IP or Ethernet address to the T3 storage device

• Migrate the Sun Management Center server to a different machine

• Uninstall the Monitoring and Management of A5x00 and T3 Devices add-on product

• Uninstall Sun Management Center

If you uninstall the Monitoring and Management of A5x00 and T3 Devices add-on product without first removing the T3 device configuration, you can remove the T3 device configuration as described in the following procedure.

The corrected procedure is as follows:

To Remove T3 Device Configuration

Steps

1. Log in as root on the machine where the Monitoring and Management of A5x00 and T3 Devices add-on product is installed.

2. Type the following command to stop the Sun Management Center agent.

   #/opt/SUNWsymon/es-stop -a

3. Run the pre-uninstall script to remove T3 device configuration information.

   1. Type the command /opt/SUNWsymon/addons/storage/sbin/pre-uninst.sh.

   2. When asked whether you want to stop the T3 from sending syslog messages, type y.

      You are then prompted for the root password for the T3 device.

   3. Type the password.

      You are notified that the T3 device has been removed from the T3 module.

4. Uninstall the add-on product.