The Number of Interfaces group property indicates the number of interfaces to the machine, including the loopback. Additional interfaces properties are described in the following table.
Table C–94 Interfaces Table
Property |
Description |
---|---|
IF Index |
Index of the interface in this table |
IF Descr |
Description of the interface |
IF Type |
Type of the interface |
IF Largest MTU |
Size of the largest datagram that can be sent on the interface |
IF Speed |
Bandwidth of the interface |
IF Physical Address |
Physical address of the interface |
IF Admin Status |
Desired state of the interface |
IF Oper Status |
Operational state of the interface |
IF Last Change |
Value of sysUpTime (that is, time when the system is up and running) when the operational state has changed last time |
IF In Octets |
Octets received on the interface |
IF In Unicast Pkts |
Unicast packets received on the interface |
IF In nonUnicast Pkts |
Non-unicast packets received on the interface |
IF In Discards |
Number of packets on the interface that are chosen to be discarded |
IF In Errors |
Number of inbound packets on the interface that contained errors |
IF In Unknown Protos |
Number of packets with unsupported protocol that were received on the interface |
IF Out Octets |
Number of octets that are transmitted out on the interface |
IF Out Unicast Pkts |
Number of unicast packets transmitted out on the interface |
IF Out nonUnicast Pkts |
Number of non-unicast packets transmitted out on the interface |
IF Out Discards |
Number of outbound packets on the interface that contained errors |
IF Out Errors |
Number of outbound packets that could not be transmitted because of errors |
IF Out Queue Length |
Length of the output packet queue |
IF Specific |
Reference to the MIB definitions specific to the particular media |