This section describes the commands executed in the system management software environment.

The following commands are supported:

addboard()

Assign, connect, and configure a board to a domain.

addcodlicense

Install a Capacity on Demand (COD) license key on the system controller (SC).

addtag()

Assign a domain name (tag) to a domain.

cancelcmdsync()

Command synchronization command.

codd

Capacity on Demand (COD)daemon.

console()

Access the domain console.

dca()

Domain configuration agent.

deleteboard()

Unconfigure, disconnect, and unassign a system board from a domain.

deletecodlicense()

Remove a Capacity on Demand (COD) license key on the system controller (SC).

deletetag()

Remove the domain tag name associated with the domain.

disablecomponent()

Add the specified component to the specified blacklist file.

dsmd()

Domain status monitoring daemon.

dxs()

Domain X server.

efhd()

Error- and fault-handling daemon.

elad()

Event log access daemon.

enablecomponent()

Remove the specified component from the specified blacklist.

erd()

Event-reporting daemon.

esmd()

Environmental status-monitoring daemon.

flashupdate()

Update the Flash PROMs located on the CPU boards, MaxCPU boards, and system controllers (SC).

fomd()

Failover management daemon.

frad()

FRU access daemon.

help()

Display help information for SMS commands.

hpost()

Sun Fire high-end system power-on self-test (POST) control application.

hwad()

Hardware access daemon.

initcmdsync()

Command synchronization command.

kmd()

SMS key management daemon.

mand()

Management network daemon.

mld()

Message-logging daemon.

moveboard()

Move a board from one domain to another.

osd()

OpenBoot PROM server daemon.

pcd()

Platform configuration database daemon.

poweroff()

Control power off.

poweron()

Control power on.

rcfgadm()

Remote configuration administration.

reset()

Send reset to all CPU ports of a specified domain.

resetsc()

Reset the other system controller (SC).

runcmdsync()

Prepare a specified script for recovery after a failover.

savecmdsync()

Command synchronization command.

setbus()

Perform dynamic bus reconfiguration on active expanders in a domain.

setdatasync()

Modify the data propagation list used in data synchronization.

setdate()

Set the date and time for the system controller (SC) or a domain.

setdefaults()

Remove all instances of a previously active domain.

setfailover()

Modify the state of the system controller (SC) failover mechanism.

setkeyswitch()

Change the position of the virtual keyswitch.

setobpparams()

Set up OpenBoot PROM variables for a domain.

setupplatform()

Set up the available component list for domains.

showboards()

Show the assignment information and status of the boards.

showbus()

Display the bus configuration of expanders in active domains.

showcmdsync()

Display the current command synchronization list.

showcodlicense

Display the current Capacity on Demand (COD) right-to-use (RTU) licenses stored in the COD license database.

showcodusage

Display the current usage statistics for Capacity on Demand (COD) resources.

showcomponent()

Display the blacklist status for a component.

showdatasync()

Display the status of system controller (SC) data synchronization for failover.

showdate()

Display the date and time for the system controller (SC) or a domain.

showdevices()

Display system board devices and resource usage information.

showenvironment()

Display the environmental data.

showfailover()

Display system controller (SC) failover status or role

showkeyswitch()

Display the position of the virtual keyswitch.

showlogs()

Display message log files.

showobpparams()

Display OpenBoot PROM bring-up parameters for a domain.

showplatform()

Display the board available component list and domain state for each domain.

showxirstate()

Display CPU dump information after sending a reset pulse to the processors.

smsbackup()

Back up the SMS environment.

smsconfig()

Configure the SMS environment.

smsconnectsc()

Access a remote SC console.

smsinstall

Install the SMS environment.

smsrestore()

Restore the SMS environment.

smsupgrade

Upgrade the SMS environment.

smsversion()

Change the active version of SMS to another co-resident version of the SMS software.

ssd()

SMS startup daemon.

testemail()

Test the event-reporting features, which include event message logging and email notification of events.

tmd()

Task management daemon.

wcapp

wPCI application daemon.