![](../graphics/a.gif) |
|
|
System Administration | Intro(1m) |
| Intro - SMS Administration |
|
This section describes the commands executed in the system management software environment.
|
|
The following commands are supported:
-
addboard()
- Assign, connect, and configure a board to a domain.
-
addcodlicense
- Install a Capacity on Demand (COD) license key on the system controller (SC).
-
addtag()
- Assign a domain name (tag) to a domain.
-
cancelcmdsync()
- Command synchronization command.
-
codd
- Capacity on Demand (COD)daemon.
-
console()
- Access the domain console.
-
dca()
- Domain configuration agent.
-
deleteboard()
- Unconfigure, disconnect, and unassign a system board from a domain.
-
deletecodlicense()
- Remove a Capacity on Demand (COD) license key on the system controller (SC).
-
deletetag()
- Remove the domain tag name associated with the domain.
-
disablecomponent()
- Add the specified component to the specified blacklist file.
-
dsmd()
- Domain status monitoring daemon.
-
dxs()
- Domain X server.
-
efhd()
- Error- and fault-handling daemon.
-
elad()
- Event log access daemon.
-
enablecomponent()
- Remove the specified component from the specified blacklist.
-
erd()
- Event-reporting daemon.
-
esmd()
- Environmental status-monitoring daemon.
-
flashupdate()
- Update the Flash PROMs located on the CPU boards, MaxCPU boards, and system controllers (SC).
-
fomd()
- Failover management daemon.
-
frad()
- FRU access daemon.
-
help()
- Display help information for SMS commands.
-
hpost()
- Sun Fire high-end system power-on self-test (POST) control application.
-
hwad()
- Hardware access daemon.
-
initcmdsync()
- Command synchronization command.
-
kmd()
- SMS key management daemon.
-
mand()
- Management network daemon.
-
mld()
- Message-logging daemon.
-
moveboard()
- Move a board from one domain to another.
-
osd()
- OpenBoot PROM server daemon.
-
pcd()
- Platform configuration database daemon.
-
poweroff()
- Control power off.
-
poweron()
- Control power on.
-
rcfgadm()
- Remote configuration administration.
-
reset()
- Send reset to all CPU ports of a specified domain.
-
resetsc()
- Reset the other system controller (SC).
-
runcmdsync()
- Prepare a specified script for recovery after a failover.
-
savecmdsync()
- Command synchronization command.
-
setbus()
- Perform dynamic bus reconfiguration on active expanders in a domain.
-
setdatasync()
- Modify the data propagation list used in data synchronization.
-
setdate()
- Set the date and time for the system controller (SC) or a domain.
-
setdefaults()
- Remove all instances of a previously active domain.
-
setfailover()
- Modify the state of the system controller (SC) failover mechanism.
-
setkeyswitch()
- Change the position of the virtual keyswitch.
-
setobpparams()
- Set up OpenBoot PROM variables for a domain.
-
setupplatform()
- Set up the available component list for domains.
-
showboards()
- Show the assignment information and status of the boards.
-
showbus()
- Display the bus configuration of expanders in active domains.
-
showcmdsync()
- Display the current command synchronization list.
-
showcodlicense
- Display the current Capacity on Demand (COD) right-to-use (RTU) licenses stored in the COD license database.
-
showcodusage
- Display the current usage statistics for Capacity on Demand (COD) resources.
-
showcomponent()
- Display the blacklist status for a component.
-
showdatasync()
- Display the status of system controller (SC) data synchronization for failover.
-
showdate()
- Display the date and time for the system controller (SC) or a domain.
-
showdevices()
- Display system board devices and resource usage information.
-
showenvironment()
- Display the environmental data.
-
showfailover()
- Display system controller (SC) failover status or role
-
showkeyswitch()
- Display the position of the virtual keyswitch.
-
showlogs()
- Display message log files.
-
showobpparams()
- Display OpenBoot PROM bring-up parameters for a domain.
-
showplatform()
- Display the board available component list and domain state for each domain.
-
showxirstate()
- Display CPU dump information after sending a reset pulse to the processors.
-
smsbackup()
- Back up the SMS environment.
-
smsconfig()
- Configure the SMS environment.
-
smsconnectsc()
- Access a remote SC console.
-
smsinstall
- Install the SMS environment.
-
smsrestore()
- Restore the SMS environment.
-
smsupgrade
- Upgrade the SMS environment.
-
smsversion()
- Change the active version of SMS to another co-resident version of the SMS software.
-
ssd()
- SMS startup daemon.
-
testemail()
- Test the event-reporting features, which include event message logging and email notification of events.
-
tmd()
- Task management daemon.
-
wcapp
- wPCI application daemon.
|
SMS 1.4 | Go To Top | Last Changed 19 September 2003 |
Company Info
|
Contact
|
Copyright 2004 Sun Microsystems, Inc., 4150 Network Circle, Santa Clara, CA 95054 USA. All rights reserved.
|