Invalid Address Extension
Check and re-enter the extension.
Invalid Characters or Invalid Length in Address Extension
Check and re-enter the extension.
Missing Address Extension
Enter the address extension.
Invalid Character in Called Address or in Calling Address
Check and re-enter the address.
Invalid Character in Calling Address
Check and re-enter the address.
Invalid Address Local SAP
Check and re-enter the local SAP.
Invalid Address Loop SAP
Check and re-enter the loop SAP.
Invalid Character in Call User Data
Check and re-enter the Call User Data.
Specify the HTML browser before starting Help
To use on-line help with x25tool, you must first specify the browser you want to use (Netscape, Hot Java, Mosaic).
Invalid DNIC
Check and re-enter the DNIC
Cannot allocate memory
Free up memory and try again.
Cannot load file <file_name> : <cause>
The cause displayed with this message should give you some indication of the problem. Correct the problem and try again.
The file does not exist, or is in the wrong format
Check that the file exists and is in the right format.
Error loading file for link# <link id>
The file may be in the wrong format.
Cannot open lapb device
The X.25 network must be up before the lapb device can be opened.
Cannot open x25 device
The X.25 network must be up before the x25 device can be opened.
NO IXE file
The file is missing.
Error opening directory %s
The directory may not exist.
Error opening file %s
The file may not exist.
The following error messages can occur if you do not have read and write permission. If you receive one of the messages listed below, log in as root or become superuser, and try again.
Cannot add dynamically this IP interface
Cannot add dynamically this link
Cannot load dynamic parameters for link <link>
Cannot load dynamic parameters for NUI
Cannot load dynamic parameters for Route
Cannot remove dynamically this IP interface
Cannot remove dynamically this link
Cannot reset this link
Cannot save dynamically IP Interface Parameters
Cannot save dynamically IP Map Parameters
Cannot save dynamically LAPB Parameters
Cannot save dynamically LLC2 Parameters
Cannot save dynamically MLP Parameters
Cannot save dynamically NUI Parameters
Cannot save dynamically Pad Daemon Parameters
Cannot save dynamically PAD Printer Parameters
Cannot save dynamically PVC
Cannot save dynamically Routing Parameters
Cannot save dynamically X25 Security Parameters
Cannot save dynamically WAN Parameters
Cannot save dynamically this Link
Cannot get running links list
Error creating backup of boardconf file
Error creating backup of ipconf file
Error creating backup of ixemapconf file
Error creating backup of pvcmapconf file
Error creating backup of nuimapconf file
Error creating backup of paddconf file
Error creating backup of padmapconf file
Error creating backup of routes file
Error creating backup of x25secuconf file
Error creating backup of x25secupid file
Cannot create a symbolic link from <source file> to <destination file> <causes>
Error creating backup of x29profile file
Error creating backup of xhosts file
Error creating backup of xtpmapconf file
Unable to Execute Command
Unable to Execute Command <command name>
File <filename> is read-only Change the permissions and re-do
Cannot remove symbolic link <symbolic_link>
Error writing boardconf file
Cannot write in Directory <directory_name>
Error writing ipconf file
Error writing ixemapconf file
Error writing pvcmapconf file
Error writing nuimapconf file
Error writing paddconf file
Error writing padmapconf file
Error writing routes file
Error writing x25secuconf file
Error writing x25secupid file
Error writing x29profile file
Error writing xhosts file
Error writing xtpmapconf file
The following messages indicate a problem with the format of the file. This type of problem can be avoided by using x25tool whenever possible, instead of directly editing files.
nuimapconf: Bad facility: non-digit locdefpktsize
nuimapconf: Bad facility: overlong locdefpktsize
nuimapconf: Bad facility: non-digit locdefthclass
nuimapconf: Bad facility: overlong locdefthclass
nuimapconf: Bad facility: non-digit locdefwsize
nuimapconf: Bad facility: overlong locdefwsize
nuimapconf: Bad facility: non-digit remdefpktsize
nuimapconf: Bad facility: overlong remdefpktsize
nuimapconf: Bad facility: non-digit remdefthclass
nuimapconf: Bad facility: overlong remdefthclass
nuimapconf: Bad facility: non-digit remdefwsize
nuimapconf: Bad facility: overlong remdefwsize
nuimapconf: Unexpected character in facility string
xtpmapconf: invalid address <address> for device xtp<device>
xtpmapconf: invalid cud <cud> for device xtp<device>
xtpmapconf: incorrect device
xtpmapconf: incomplete line in config file
xtpmapconf: invalid link number : <link_number> for device xtp<device>
xtpmapconf: invalid opt <opt> for device xtp<number>
xtpmapconf: invalid printer name <printername> for device xtp<number>
route file: AEF already set: <aef>
route file: bad type of AEF: <aef>
route file: AEF must be in Hexa : <aef>
route file: source_aef not supported, skipped
route file: too long AEF: <aef>
route file: bad source_aef entry
route file: bad link number
route file: bad right-hand part of aef entry
route file: bad tag <tag> at line <line_number>
route file: Mac address already set <mac_address>
route file: bad 802 address <address>
route file: mismatched quotes at line <line_number>
route file: unknown keyword on line <line_number>
route file: parse error at line <line_number>, truncated file?
route file: Pid already set <pid>
route file: bad Pid <pid>
route file: Pid must be hexa <pid>
route file: Odd length pid <pid>
route file: Pid too long <pid>
route file: PSTN number already set <PSTN_number>
route file: PSTN missing <PSTN_number>
route file: PSTN number must not exceed 16 digits <PSTN_number>
route file: too many items on line <line_number>
route file: X.121 address already set <x121_address>
route file: bad X.121 <x121_address>
route file: bad X.121 <x121_address>
route file: bad right-hand part of X.121
route file: too long X.121 <x121_address>
x25secuconf, line <line_number> :Bad address
x25secuconf, line <line_number> : No more than 15 digits in X121 address
x25secuconf, line <line_number> : Invalid character in address
x25secuconf, line <line_number> :Bad date
x25secuconf, line <line_number> :Bad day number
x25secuconf, line <line_number> :Bad link id
x25secuconf, line <line_number> :Bad month
x25secuconf, line <line_number> : Invalid repetition period
x25secuconf, line <line_number> :Bad time
x25secuconf, line <line_number> :Bad year number
x25secupid, line <line_number> : Error in reading pid
x25secuconf, line <line_number> :error in get_service_name
x25secupid, line <line_number> : No * after 128 digits in pid
x25secupid, line <line_number> : pid len must be even
Missing service name <service_name> in x25secuconf file
x25secuconf, line <line_number> :Service name too long
x25secupid, line <line_number> : Invalid Character in pid
x25secupid, line <line_number> :character not authorized in service name
Unexpected Hold-Down Timer value <timer_value> Assumed to be X.25 mode from V8 config file
Unexpected 'Unconfigured Host' value on line <line_number> Assumed to be Reset Action from V8 config file
Unrecognized option at line <line_number>, processing PAD Daemon file
Invalid Characters or Invalid Length in PID
x25secupid, line <line_number> :error in read_service_name
x25secupid, line <line_number> :Service name too long