Enter a link number specifying the link over which you reach the IP network specified in the IP Subnet Mask/Remote IP Address.
The IP address of the remote IP host, in either hostname or numeric form.
Set to either SVC (switched virtual circuit) or PVC (permanent virtual circuit). If this parameter is set to SVC, you will need to include the remote X.25 address. If this parameter is set to PVC, you will need to set the PVC number.
The X.25 (X.121) address of the specified remote host. If you are attached to the DDN, the X.25 address is generated using the IP address. You do not need to enter it here, although if you do other information you enter can be taken into account. If you do want to enter the X.25 address, you need to calculate it in the same way as the DDN software.
If you are using extended addressing, choose either OSI or non-OSI. Otherwise, choose None.
If you are using extended addressing, enter the OSI NSAP address or non-OSI address extension. An OSI NSAP address is 40 or fewer hexadecimal digits.