C H A P T E R 2 |
BMC Environment Test(bmcenvironment) |
The bmcenvironment test scans the sensors of the Base Management Controller (BMC) and reports failures on sensors that report readings outside of their reported ranges.
Note - The bmcenvironment test is supported on x86 platforms only. |
Caution - Ensure that no other applications, such as ipmitool, are using the BMC when perfoming the bmcenvironmenttest. |
Caution - Ensure that a service processor daughter card is installed and seated correctly. |
To reach the following dialog box, right-click on the test name in the System Map and select Test Parameter Options. If you do not see this test in the System Map, you might need to expand the collapsed groups, or your system might not include the device appropriate to this test. Refer to the SunVTS User's Guide for more details.
Note - Only the standard options are supported for the bmcenvironment test. |
bmcenvironment supports the test modes listed in the following table.
/opt/SUNWvts/bin/bmcenvironment standard_arguments
Note - Only the standard SunVTS command line argumentst are supported for the bmcenvironment test. |
Copyright © 2005, Sun Microsystems, Inc. All Rights Reserved.