lsimega(7D)

Name | Description | DRIVER CONFIGURATION | Attributes | Files | See Also

Name

lsimega– SCSI HBA driver for LSI MegaRAID 320-2x SCSI RAID Controller

Description

The lsimega SCSI RAID host bus adapter driver is a SCSA-compliant nexus driver that supports LSI MegaRAID 320-2x SCSI RAID devices. The driver also supports LSI MegaRAID 320-1, 320-2e, Dell PERC 4e/Si, 4e/Di, 4e/DC RAID controllers.

The lsimega driver supports standard functions provided by the SCSA interface, including RAID disk I/O and passthrough I/O to support SCSI tape and CDROM.

DRIVER CONFIGURATION

The lsimega.conf file contains no user configurable parameters. Please configure your hardware through BIOS.

The LSI MegaRAID 320-2x device can support up to 40 logic drivers. Note that BIOS numbers the logic drives as 1 through 40, however in Solaris these drives are numbered from 0 to 39.

Attributes

See attributes(5) for a description of the following attributes:

ATTRIBUTE TYPE	ATTRIBUTE VALUE
Availability	x86

Files

/kernel/drv/lsimega

32-bit ELF kernel module.

/kernel/drv/amd64/lsimega

64–bit kernel module (x86 only).

/kernel/drv/lsimega.conf

Driver configuration file (contains no user-configurable options).

See Also

prtconf(1M), attributes(5), amr(7D), scsi_hba_attach_setup(9F), scsi_sync_pkt(9F), scsi_transport(9F), scsi_inquiry(9S), scsi_device(9S), scsi_pkt(9S)

Small Computer System Interface-2 (SCSI-2)

SunOS 5.11  Last Revised 6 April 2006

Name | Description | DRIVER CONFIGURATION | Attributes | Files | See Also