oce(7D)

Name | Synopsis | Description | Files | Attributes | See Also

Name

oce– Emulex OneConnect 10 GBit Ethernet Adapter Driver

Synopsis

/dev/oce*

Description

The oce 10 GBit ethernet adapter driver is a STREAMS based GLD (NIC driver) for 10G Ethernet functions on the Emulex OneConnect cards.

The oce driver initializes the NIC functions on the chip and implements send/receive of frames. The driver provides statistics and error reporting. The driver also supports multicast and promiscuous modes for send/receive, VLANs, lso, and so forth. The driver supports mtu of 1500 or 9000.

Configuration

The device can be configured using tools such as dladm or ifconfig.

The mtu can be changed using the dladm set-linkprop command:

dladm set-linkprop -p mtu=9000 oce0

The only valid value for speed/mode is 10 Gbps/full-duplex.

The interfaces created by the oce driver can be configured through ifconfig:

ifconfig oce0 plumb xxx.xxx.xxx.xxx up ifconfig oce0 down unplumb

Files

/kernel/drv/oce

32-bit ELF kernel module

/kernel/drv/amd64/oce

64-bit ELF kernel module, x86

/kernel/drv/sparcv9/oce

64-bit ELF kernel module, SPARC

Attributes

See attributes(5) for descriptions of the following attributes:

ATTRIBUTE TYPE	ATTRIBUTE VALUE
Availability	SPARC, x86
Availability	SUNWemlxs

See Also

dladm(1M), ifconfig(1M), netstat(1M), prtconf(1M), attributes(5), dlpi(7P)

Writing Device Drivers

Network Interface Guide

STREAMS Programming Guide

IEEE 802.3ae Specificiation, IEEE - 2002

SunOS 5.11  Last Revised 14 Dec 2009

Name | Synopsis | Description | Files | Attributes | See Also