Use the client's management interface to register the client. Using the iSCSI configuration function, specify the IP address of the iSNS server and allow discovery of the client by the iSNS server.
Use the “iSNS Server Management” RBAC profile to obtain the authorizations needed for managing the iSNS service.
Roles contain authorizations and privileged commands. For more information about roles, see Configuring RBAC (Task Map) in System Administration Guide: Security Services.
Verify that the client has been registered with the iSNS server:
#isnsadm list-node iSCSI Name: iqn.1986-03.com.sun:01:000e0c9f10da.45173FEA.engr Alias: STK5320_NAS Type: Target . iSCSI Name: iqn.1986-03.com.sun:01:000e0c9f10da.454F00A2.acct Alias: Type: Initiator |
The output shows the clients' iSCSI names.
Verify the name of the discovery domain:
#isnsadm list-dd |
Add the client to the discovery domain:
#isnsadm add-node -d domain_name iSCSI_Name |
For example, to add the target called “STK5320_NAS” to the Eng-dd discovery domain:
#isnsadm add-node -d Eng-dd iqn.1986-03.com.sun:01:000e0c9f10da.454F00A2.engr |
List all the clients in the discovery domain to verify the client has been added:
#isnsadm list-dd -v domain_name |
For example, to check the Eng-dd discovery domain:
#isnsadm list-dd -v Eng-dd DD name: Eng-dd DD set: Development-dds iSCSI Name: iqn.1986-03.com.sun:01:000e0c9f10da.45173FEA.engr iSCSI Name: iqn.1986-03.com.sun:01:000e0c9f10da.454F00A2.acct iSCSI name: iqn.1986-03.com.sun:01:e00000000000.46fd8e2b |