test

Sun Enterprise 250 Server Owner's Guide

What to Do

Note -

Perform this procedure with the power on and the keyswitch set to the Power-on position.

  1. With the keyswitch in the Power-on position, press the Break key on your alphanumeric terminal's keyboard, or enter the Stop-a sequence on a Sun keyboard.

    To enter the Stop-a sequence, press the Stop key and the a key simultaneously. The ok prompt is displayed.

  2. To set the diag-level variable, enter the following: 

    ok setenv diag-level 
value

The value can be off, min, med, or max. See "OBDiag Configuration Variables" for information about each setting.