NAME
na.snmp-trap.default-trapfile - SunNet Manager SNMP trap file
DESCRIPTION
The SNMP trap daemon na.snmp-trap(8) translates SNMP traps to SunNet Manager traps. It uses the SNMP trap file to map trap types to names and to determine which trap types should be ignored.
The default file name is defined by the value of this keyword in the /etc/opt/SUNWconn/snm/snm.conf file for Solaris 2.x and in the /etc/snm.conf file for Solaris 1.x on the system where the trap daemon is running. At installation, this file name is /var/opt/SUNWconn/snm/snmp.traps for Solaris 2.x and /var/adm/snmp.traps for Solaris 1.x. If you wish to specify a different trap file for a specific device, identify the trap file in an SNMP host file entry for the device.
SYNTAX
The SNMP trap file consists of one or more entries. Each entry defines the traps for one enterprise.
The first line in an entry is of the following format:
enterprise id
where
id is the enterprise identifier in dot notation. Set id to "0" to specify the trap names for generic traps.
The remaining lines in an entry are of the following format:
number name discard
where
number
is the type number of the trap.
name is the name of the trap.
discard
is an optional field that, if set to the string dis_card, indicates that this trap type should be discarded.
EXAMPLE
The following is an example of a trap file entry: enterprise 1.3.6.1.4.1.42
NOTES
na.snmp-trap.default-trapfile is not a file. It is the name of a keyword in snm.conf(5). Since you can change the name of the file, it is listed by its keyword.