Asynchronous Connections

Asynchronous connections either use information carried in the data itself (software flow control), or handshake signals generated by the serial interface (hardware flow control), to control the data transmission. They provide temporary connections between two endpoints, and are typically established over private and public telephone networks or null modem links.

The cost of the connection is related to the duration of the call and the distance between endpoints. For this reason, asynchronous connections are best suited to transient network traffic, and are used typically for mobile communication, teleworking, and temporary access to Internet servers as shown in Figure 1-3.

Figure 1-3 Asynchronous Connection between Client and Server

The asynchronous connection is established through an asynchronous serial interface installed in the host machine, and a modem which represents the interface between the host machine and the analog telephone network. During the connection phase, the modems at each endpoint communicate to set up the call.

Refer to the Solstice PPP 3.0.1 Installation Guide and Release Notes for a list of the asynchronous serial interfaces and modems with which Solstice PPP has been tested. Configuration information for these modems is contained in the modem database file /etc/opt/SUNWconn/ppp/modems.

You can modify the modems database file to add configuration information for additional modems, provided they support standard Hayes AT commands. Refer to the manufacturers' documentation for details of the commands used to configure your modem.