The Netra software does not display the External Disks module if you do not have external disks attached to the Netra server. If you add a new external disk to a Netra server that is already configured, restart the server with the "Check for new devices during restart" option so that it recognizes the new disk drive.
Use the External Disks module to create mount points for external disks or to erase any unmounted disks. You must provide the mount point for a disk drive.
The External Disk module presents a graphic overview of the external disks attached to the system. Each disk is presented as a colored icon, and the icon color represents its state. The legend correlates the icon color to states described in the following table.
Table 9-1 External Disk State Color Code
Color |
State |
Comment |
---|---|---|
Green |
Unused |
Disk is available for formatting and mounting. |
Red |
System |
Disk contains the Solaris operating environment. |
Yellow |
Erased |
Disk has been formatted. |
Aqua |
Mounted |
Disk is accessible through the file system hierarchy. |
Orange |
Not a Netra disk |
Disk is not a Netra disk, but partially or totally mounted. |
Purple |
Meta |
Disk which all or part is in use by a metadevice. |
(blank) |
Empty |
No disk. |
Above each disk icon is the disk name. If this name is a link, then by clicking the link, a list of valid operations for that disk is displayed. Only unused disks or disks that have already been erased/mounted by the Netra system show up as links.
When you erase a disk, you lose all the data on it.
If an external disk is attached to the Netra server but is not in the expected Netra format, you do not see the mount option. Erase the disk first. The mount option is then displayed.
From the Main Administration page, under "System Administration," click External Disks.
The External Disk Administration page is displayed.
Complete the form using the information in the following table.
Table 9-2 External Disk Mountpoint Information
Option |
Description |
Mount point |
The directory on which to mount the disk. If the directory does not exist, it is created before the disk is mounted.
|
A mounted disk cannot be erased through the External Disks Administration module.
From the Main Administration page, under "System Administration," click External Disks.
The Unmount External Disk Administration page is displayed.
Click OK to confirm the operation.
From the Main Administration page, under "System Administration," click External Disks.
Under "External Disk Administration," click disk link, then click Erase External Disk.
The Erase External Disk Administration page is displayed.
When a disk is erased, all the data on it is lost forever.
Click OK only if you want to erase the disk, otherwise click on the Home icon.