Figures

FIGURE 2-1 System Status Panel Locations

FIGURE 2-2 Removing the System Status Panel (Netra CT 810 Server)

FIGURE 2-3 Removing the System Status Panel (Netra CT 410 Server)

FIGURE 2-4 Removing a Fan Tray from a Netra CT 810 Server

FIGURE 2-5 Removing a Fan Tray from a Netra CT 410 Server

FIGURE 2-6 Positioning the System Status Panel (Netra CT 810 Server)

FIGURE 2-7 Positioning the System Status Panel (Netra CT 410 Server)

FIGURE 2-8 LEDs on the System Status Panel (Netra CT 810 Server)

FIGURE 2-9 LEDs on the System Status Panel (Netra CT 410 Server)

FIGURE 2-10 Slots for Boards in a Netra CT 810 Server

FIGURE 2-11 Slots for Boards in a Netra CT 410 Server

FIGURE 2-12 Loosening the Ejection-Lever Captive Screws

FIGURE 2-13 LEDs on the System Status Panel (Netra CT 810 Server)

FIGURE 2-14 LEDs on the System Status Panel (Netra CT 410 Server)

FIGURE 2-15 Locating a Rear Transition Module in a Netra CT 810 Server (Top View)

FIGURE 2-16 Locating a Rear Transition Module in a Netra CT 410 Server (Top View)

FIGURE 2-17 S1301 DIP Switch Bank Location on the RTM-S (Component Side)

FIGURE 2-18 S1302 DIP Switch Bank Location on the RTM-S (Solder Side)

FIGURE 2-19 Aligning the Rear Transition Module with the Rear Cage Cutouts

FIGURE 2-20 Connectors on the Netra CP2500 Host Rear Transition Module (RTM-H)

FIGURE 2-21 Aligning the Board with the Board Cage Cutouts

FIGURE 2-22 Tightening the Ejection Lever Captive Screws

FIGURE 2-23 Connectors on the Netra CP2140 Host CPU Board

FIGURE 2-24 Connectors on the Netra CP2500 Host CPU Board