Figures

FIGURE 1-1 Netra 440 Server Ship Kit Contents

FIGURE 3-1 Contents of the Hardmount 19-Inch 4-Post Kit

FIGURE 3-2 Securing the Hardmount Brackets to the Server

FIGURE 3-3 Attaching the Rear Mount Support Brackets

FIGURE 3-4 Securing the Front of the Server to the Rack

FIGURE 3-5 Securing the Rear of the Server to the Rack

FIGURE 3-6 Contents of the Sliding Rail 19-Inch 4-Post Kit

FIGURE 3-7 Securing the Hardmount Bracket to the Server

FIGURE 3-8 Dismantling the Slide

FIGURE 3-9 Securing the Glides to the System Chassis

FIGURE 3-10 Securing the Short Brackets to the Front of the Rack

FIGURE 3-11 Securing the Long Brackets to the Rear of the Rack

FIGURE 3-12 Securing the Slide to the Brackets

FIGURE 3-13 Sliding the System Into the Rack

FIGURE 3-14 Securing the Front of the System to the Rack

FIGURE 3-15 Installing Extender and Slide Assembly on Long Bracket

FIGURE 3-16 Securing the Long Brackets Extenders and Slide Assembly to Rack

FIGURE 3-17 Contents of the Hardmount 600 mm 4-Post Kit

FIGURE 3-18 Securing the Hardmount Brackets to the Server

FIGURE 3-19 Attaching the Rear Mount Support Brackets

FIGURE 3-20 Attaching the 600 mm Front Adjuster Brackets to the Front Hardmount Brackets

FIGURE 3-21 Attaching the 600 mm Front Adjuster Brackets to the Rack

FIGURE 3-22 Securing the Rear Mount Flange

FIGURE 3-23 Contents of the Hardmount 23-Inch 2-Post Kit

FIGURE 3-24 Securing the Side Brackets to the Side of the Server

FIGURE 3-25 Securing the Front of the Server to the Rack

FIGURE 3-26 Contents of the Hardmount 19-Inch 4-Post Kit

FIGURE 3-27 Securing the Side Brackets to the Side of the Server

FIGURE 3-28 Installing and Securing the Server in the 2-Post Rack

FIGURE 4-1 Back Panel Features (DC Version)

FIGURE 4-2 Back Panel Features (AC Version)

FIGURE 4-3 Alarm Port

FIGURE 4-4 Serial Port Pin Numbering

FIGURE 4-5 USB Connector Pin Numbering

FIGURE 4-6 Ethernet Connector Pin Numbering

FIGURE 4-7 SCSI Port Pin Numbering

FIGURE 4-8 Serial Management Port Pin Numbering

FIGURE 4-9 Network Management Port Pin Numbering

FIGURE 4-10 DC Connection Parts

FIGURE 4-11 Stripping the Insulation From the Wire

FIGURE 4-12 Opening the Input Plug Cage Clamp Using the Cage Clamp Operating Lever

FIGURE 4-13 Opening the Cage Clamp Using a Screwdriver

FIGURE 4-14 Assembling the DC Input Power Cable

FIGURE 4-15 Inserting the Bottom Portion of the Strain Relief Housing

FIGURE 4-16 Routing the Wires out of the Bottom Portion of the Strain Relief Housing

FIGURE 4-17 Securing the Wires to the Strain Relief Housing

FIGURE 4-18 Assembling the Strain Relief Housing

FIGURE 4-19 Opening the System Door

FIGURE 4-20 Turning the Rotary Switch to the Standby Position

FIGURE 4-21 Connecting the DC Input Power Cable to the DC Connectors

FIGURE 4-22 Disconnecting the DC Input Power Cable From the DC Connector

FIGURE 4-23 Opening the System Door

FIGURE 4-24 Turning the Rotary Switch to the Standby Position

FIGURE 4-25 Connecting the AC Power Cords to the AC Connectors

FIGURE 5-1 Patch Panel Connection Between a Terminal Server and a Netra 440 Server

FIGURE 6-1 Opening the System Door

FIGURE 6-2 Rotary Switch Positions

FIGURE A-1 Removing the DVD Slot Cover

FIGURE A-2 Installing the DVD drive.