rpcinfo(1M)

NAME | SYNOPSIS | DESCRIPTION | OPTIONS | EXAMPLES | ATTRIBUTES | SUMMARY OF TRUSTED SOLARIS CHANGES | SEE ALSO

NAME

rpcinfo- Report RPC information

SYNOPSIS

rpcinfo [-m| -s] [host]
rpcinfo -p [host]
rpcinfo -T transport host prognum [versnum]
rpcinfo [-M] [-s] [host]
rpcinfo -l [-T transport] host prognum versnum
rpcinfo [-n portnum] -u host prognum [versnum]
rpcinfo [-n portnum] -t host prognum [versnum]
rpcinfo -a serv_address -T transport prognum [versnum]
rpcinfo -b [-T transport] prognum versnum
rpcinfo -d [-T transport] prognum versnum

DESCRIPTION

rpcinfo makes an RPC call to an RPC server and reports what it finds.

In the first synopsis, rpcinfo lists all the registered RPC services with rpcbind on host. If host is not specified, the local host is the default. If -s is used, the information is displayed in a concise format.

In the second synopsis, rpcinfo lists all the RPC services registered with rpcbind, version 2. Note that the format of the information is different in the first and the second synopsis. This is because the second synopsis is an older protocol used to collect the information displayed (version 2 of the rpcbind protocol).

The third synopsis makes an RPC call to procedure 0 of prognum and versnum on the specified host and reports whether a response was received. transport is the transport which has to be used for contacting the given service. The remote address of the service is obtained by making a call to the remote rpcbind.

The fourth synopsis is an extended version of the first. While the default report lists the RPC services that are registered for the user's sensitivity label (including multilevel services), the -M option lists all RPC services that are registered at or below the sensitivity label of the user. If the process has the net_mac_read privilege, the list includes all RPC services. These reports include the same information as that produced by the default report plus a multilevel mapping indicator or the sensitivity label at which the RPC service is registered.

The prognum argument is a number that represents an RPC program number (see rpc(4)).

If a versnum is specified, rpcinfo attempts to call that version of the specified prognum. Otherwise, rpcinfo attempts to find all the registered version numbers for the specified prognum by calling version 0, which is presumed not to exist; if it does exist, rpcinfo attempts to obtain this information by calling an extremely high version number instead, and attempts to call each registered version. Note that the version number is required for -b and -d options.

The EXAMPLES section describe other ways of using rpcinfo.

OPTIONS

-T transport

Specify the transport on which the service is required. If this option is not specified, rpcinfo uses the transport specified in the NETPATH environment variable, or if that is unset or NULL, the transport in the netconfig(4) database is used. This is a generic option, and can be used in conjunction with other options as shown in the SYNOPSIS.

-a serv_address

Use serv_address as the (universal) address for the service on transport to ping procedure 0 of the specified prognum and report whether a response was received. The -T option is required with the -a option.

If versnum is not specified, rpcinfo tries to ping all available version numbers for that program number. This option avoids calls to remote rpcbind to find the address of the service. The serv_address is specified in universal address format of the given transport.

-b

Make an RPC broadcast to procedure 0 of the specified prognum and versnum and report all hosts that respond. If transport is specified, it broadcasts its request only on the specified transport. If broadcasting is not supported by any transport, an error message is printed. Use of broadcasting requires the net_broadcast privilege.

-d

Delete registration for the RPC service of the specified prognum and versnum. If transport is specified, unregister the service on only that transport, otherwise unregister the service on all the transports on which it was registered. Only the owner of a service or a process with the net_setid privilege can delete a registration. The net_mac_read privilege is required to delete a multilevel mapping. The net_privaddr privilege is required to delete a mapping to a transport that uses a privileged address.

-l

Display a list of entries with a given prognum and versnum on the specified host. Entries are returned for all transports in the same protocol family as that used to contact the remote rpcbind.

-m

Display a table of statistics of rpcbind operations on the given host. The table shows statistics for each version of rpcbind (versions 2, 3 and 4), giving the number of times each procedure was requested and successfully serviced, the number and type of remote call requests that were made, and information about RPC address lookups that were handled. This is useful for monitoring RPC activities on host.

-M

This extended reporting option lists all RPC services that are registered at or below the sensitivity label of the process. If the process has the net_mac_read privilege, the list includes all RPC services regardless of sensitivity label. These reports include the same information as that produced by the default report plus a multilevel mapping indicator or the sensitivity label of the RPC service. Note that the process will require the sys_trans_label privilege in order to display the names of sensitivity labels not dominated by the process.

-n portnum

Use portnum as the port number for the -t and -u options instead of the port number given by rpcbind. Use of this option avoids a call to the remote rpcbind to find out the address of the service. This option is made obsolete by the -a option.

-p

Probe rpcbind on host using version 2 of the rpcbind protocol, and display a list of all registered RPC programs. If host is not specified, it defaults to the local host. Note that version 2 of the rpcbind protocol was previously known as the portmapper protocol.

-s

Display a concise list of all registered RPC programs on host. If host is not specified, it defaults to the local host.

-t

Make an RPC call to procedure 0 of prognum on the specified host using TCP, and report whether a response was received. This option is made obsolete by the -T option as shown in the third synopsis.

-u

Make an RPC call to procedure 0 of prognum on the specified host using UDP, and report whether a response was received. This option is made obsolete by the -T option as shown in the third synopsis.

EXAMPLES

---

Example 1 RPC services.




To show all of the RPC services registered on the local machine use:

example% rpcinfo

To show all of the RPC services registered with rpcbind on the machine named klaxon use:

example% rpcinfo klaxon

The information displayed by the above commands can be quite lengthy. Use the -s option to display a more concise list:

example% rpcinfo -s klaxon

program	version	netid(s)	service	owner
100000	2,3,4	tcp,udp,ticlts,ticots,ticotsord	rpcbind	superuser
100008	1	ticotsord,ticots,ticlts,udp,tcp	walld	superuser
100002	2,1	ticotsord,ticots,ticlts,udp,tcp	rusersd	superuser
100001	2,3,4	ticotsord,ticots,tcp,ticlts,udp	rstatd	superuser
100012	1	ticotsord,ticots,ticlts,udp,tcp	sprayd	superuser
100007	3	ticotsord,ticots,ticlts,udp,tcp	ypbind	superuser
100029	1	ticotsord,ticots,ticlts	keyserv	superuser
100078	4	ticotsord,ticots,ticlts	kerbd	superuser
100024	1	ticotsord,ticots,ticlts,udp,tcp	status	superuser
100021	2,1	ticotsord,ticots,ticlts,udp,tcp	nlockmgr	superuser
100020	1	ticotsord,ticots,ticlts,udp,tcp	llockmgr	superuser

To show whether the RPC service with program number prognum and version versnum is registered on the machine named klaxon for the transport TCP use:

example% rpcinfo -T tcp klaxon prognum versnum

To show all RPC services registered with version 2 of the rpcbind protocol on the local machine use:

example% rpcinfo -p

To delete the registration for version 1 of the walld (program number 100008) service for all transports use:

example# rpcinfo -d 100008 1

or

example# rpcinfo -d walld 1

---

ATTRIBUTES

See attributes(5) for descriptions of the following attributes:

ATTRIBUTE TYPE	ATTRIBUTE VALUE
Availability	SUNWcsu

SUMMARY OF TRUSTED SOLARIS CHANGES

The -M option is added, and it requires privilege. The -b and -d options require privilege. See the OPTIONS definitions for details.

SEE ALSO

Trusted Solaris 7 Reference Manual

rpcbind(1M), rpc(3N)

SunOS 5.7 Reference Manual

netconfig(4), rpc(4), attributes(5)

Trusted Solaris 7  Last Revised 11 May 1998

NAME | SYNOPSIS | DESCRIPTION | OPTIONS | EXAMPLES | ATTRIBUTES | SUMMARY OF TRUSTED SOLARIS CHANGES | SEE ALSO