test

N1 Provisioning Server 3.1, Blades Edition, Installation Guide

Blade System Chassis Firmware Requirements

Blade System chassis firmware version requirements are listed in the following table.

Note –

This version of the N1 Provisioning Server, Blades Edition supports chassis firmware version 1.2 and version 4D.2.

Table 2–2 Blade System Chassis Firmware Requirements

Device 

Firmware 

Switch  

  • Loader version 0.0.6.7

  • Boot ROM version 1.0.0.9

  • Operation Code version 1.0.0.16

System controller 

  • SC version 1.2.7

  • SC Boot version 1.2.7

B10n Load Balancing Blade 

  • Blade Support Chip version 5.1.4

  • Firmware version 1.2.1

B100s SPARC Server Blade 

  • Blade Support Chip version 5.0.2

  • Open Boot Prom version 4.7.5

B100x Server Blade 

  • Blade Support Chip version 5.1.3

  • BIOS version 4.0 (R6.0)

B200x Server Blade 

  • Blade Support Chip version 5.1.8

  • BIOS version P1.1.27

Before installing N1 Provisioning Server software, make certain that the firmware versions for the blade system chassis and each server blade meet the firmware version requirements listed by the previous table. Procedures for determining firmware versions and upgrading firmware are provided in the administration guide for each server blade.