Configuring a Router for External Access to a Farm

After a farm is activated, you might want to configure an external router to enable external access to a farm and its components. Because the external router is considered external to the I-Fabric, you need to configure it manually.

After the farm is activated, execute the command fmrouter -i farm_ID to get the VLAN and IP address information for the farm. Three IP addresses are allocated for the external router configuration: one as the gateway IP address and the other two for up to two routers you can use. The VLAN for the farm on its external network is also displayed. For the farm to be accessible from an external network, enable a route to the gateway IP address on the specified VLAN.