To Add Server Blades and Switch and System Controllers (N1 Provisioning Server 3.1, Blades Edition, System Administration Guide)

N1 Provisioning Server 3.1, Blades Edition, System Administration Guide

To Add Server Blades and Switch and System Controllers

Steps

Begin synchronization of the CPDB with the discovery of the chassis's physical state by entering the server blade's IP address or device ID when prompted to do so.
1. At the prompt, type your system controller username.
2. At the prompt, type your system controller password.
  
  You are asked whether the system controller user name and password are the same as the switch user name and password.
3. Indicate whether the user names and passwords are the same.
  - If the user names and passwords are different, type no and provide the switch login information.
    - If the user names and passwords are the same, type yes.
  When the discovery process has completed successfully, the actual synchronization process begins.

When prompted to either type q for exiting or the line number for the recommended action, enter the line number.

When asked whether to add the device, type y

When all recommended actions are completed or you do not want to complete the remaining recommended actions, type q to exit.

When prompted to either resynchronize the shelf with its saved state, to synchronize another chassis, or to exit, make the appropriate selection for synchronizing all the chassis you want to have synchronized.

Type 3 at the prompt to exit.

Example 2–2 Sample Actions for Adding Server Blades and SSCs

/opt/terraspring/sbin/shelfsync
Begining synchronization of the I-Fabric's database with an SFB1600's
physical state.

Enter SFB1600 management IP address or the device ID: 10.5.132.65
Database query in progress. Please wait.
Found: ipaddr="10.5.132.65" shelfid="50200" powerid="50260"
Checking network connectivity to 10.5.132.65....Done. Network connectivity:
OK


Attempting discovery of the specified SFB1600 device.
Management interface user name: admin
Password: 
Are the switch user name and password the same as the management user name
and password? [yY/nN]y

Is there any new switch added to the shelf that you want to bench
configure? [yY/nN]n
Device discovery for 10.5.132.65 in progress. Please wait.

Writing WML output to /var/tmp/deviceWML.29789
Device discovery succeeded.
Fetching database state.....Please Wait.....Done!!

Recommended actions: 
                Recommended
#  Cause        Action     Identification               Conflicting IDs
-- -----------  ------- ----------------------- ---------------
 0 Discovered    ADD    50211 00:03:BA:26:91:AD 
 1 Discovered    ADD    50251 sw_50251_SSC1 
* = action has been run, entering -y will suppress acknowledgement prompts
Enter line number(s) from above or q for quit: 1
ADD device 50251 (Identification: sw_50251_SSC1)? [y/n] y
Adding device 50251 by running /var/tmp/add.withtype.50251:

<segment>
<device-type name="sun-b1600-shelf" parent="bls" desc="Sun B1600 Shelf"> 
   </device-type>

...
Processing WML file /var/tmp/add.withtype.50251 ...
**WARNING** Skipping device type 'sun-b1600-shelf'. It is already defined.
**WARNING** Updating device '50001'. It is already defined.
File '/var/tmp/add.withtype.50251' processed successfully
Password set : 50251

Recommended actions: 
                Recommended
#  Cause        Action     Identification               Conflicting IDs
-- -----------  ------- ----------------------- ---------------
 0 Discovered    ADD    50250 sw_50250_SSC0 
 1 Discovered   *ADD    50251 sw_50251_SSC1 
* = action has been run, entering -y will suppress acknowledgement prompts
Enter line number(s) from above or q for quit: 0
ADD device 50211 (Identification: 00:03:BA:26:91:AD? [y/n] y
Adding device 50211 by running /var/tmp/add.withtype.50211:

<segment>


<device-type name="sun-b1600-shelf" parent="bls" desc="Sun B1600 Shelf"> 
</device-type> ...
Processing WML file /var/tmp/add.withtype.50211 ...
**WARNING** Skipping device type 'sun-b1600-shelf'. It is already defined.
File '/var/tmp/add.withtype.50211' processed successfully

Recommended actions: 
                Recommended
#  Cause        Action     Identification               Conflicting IDs
-- -----------  ------- ----------------------- ---------------
 0 Discovered   *ADD    50211 00:03:BA:26:91:AD 
 1 Discovered   *ADD    50251 sw_50251_SSC1 
* = action has been run, entering -y will suppress acknowledgement prompts
Enter line number(s) from above or q for quit: q
What do you want to do next:
#1. Re-sync the current SFB1600 device with its saved state.
#2. Synchronize another SFB1600 device with its saved state.
#3. Exit.
Make selection (1-3): 3
bash-2.03#