Sun Management Center 3.5 Installation and Configuration Guide

Supported Platforms

For the latest information on supported hardware platforms, refer to the Sun Management Center Web site at http://www.sun.com/sunmanagementcenter. The Config-Reader module is required for hardware configuration information.

The following table provides examples of supported platforms.

Table 2–2 Examples of Supported Platforms


Operating System	Sun Management Center Layers	Example Hardware
Solaris	Agent, console, add-ons Note – Some add-ons are platform-specific.	SPARCStation 1, 2, 5, 10, 20 Ultra 1, 2, 5, 10, 30, 60, 80, 450 100, 1000 T1 100, T1 105, T1 AC200, X1, T1 1120, T1 1125, T1 1400, T1 1405 Sun Enterprise 2, 150, 220R, 250, 420R, 450, 3000, 3500, E3500, 4000, 4500, E4500, 5000, 5500, E5500, 6000, 6500, E6500, 10000 Sun Ultra Enterprise 2, 5, 10, 150, 220R, 250, 420R, 450, 3000, 3500, E3500, 4000, 4500, 5000, 5500 Sun Fire 280R, V880, 3800, 4800, 4810, 6800, 15000 SPARCcenter® 2000, 2000E, 1000, 1000E
Solaris	Agent, console, server, add-ons Note – Some add-ons are platform-specific.	Small server: Up to 350 nodes under management. Netra X1, Netra T1, or Sun Blade 100 with a single 500 MHz UltraSPARC® IIe CPU or better Medium server: Up to 600 nodes under management. Sun Enterprise 420R or Ultra 60 with two 450 MHz UltraSPARC II CPUs or better Large server: Up to 750 nodes under management. Sun Fire 280R, Netra T4, or Sun Blade 1000 with two 750 MHz UltraSPARC III CPUs or better Extra-large server: Up to 1,000 nodes under management. Sun Fire 480R or equivalent with 4 900 Mhz UltraSPARC III CPUs or better.
Windows 98, Windows NT, and Windows 2000	Console layer and some add-ons	Pentium 233 MHz or better

The Config-Reader and the Dynamic Reconfiguration modules are not supported on all Sun hardware platforms. However, all other base Sun Management Center modules are supported on Sun hardware platforms.

For more information on base modules, refer to the Sun Management Center 3.5 User's Guide.