Other Remotely-Managed Target Host Variables
The following table lists all component variables for the other remotely-managed target host. The Other component type uses these variables. Use the Other type for remotely-managed targets that do not fit any of the other categories. For those variables that have default values, the default is listed. For those variables that do not have default values, an example value is shown for illustration.
Note –
The Other component type has a long list of variables, some of which will not apply to your specific hardware type. If a variable does not apply, leave it blank.
Table A–7 Component Variables for Other Remotely-Managed Target Hosts
|
Variable Name |
Description |
Default Value (if supplied) |
|---|---|---|
|
installPath |
Physical host name for the target system |
sunfire-v60x-host (Example) |
|
target_host |
Virtual host name for the target system |
:[installPath]-target (Default) |
|
description |
(Optional) Description of the target |
test v60x (Example) |
|
ethernet_mac_address |
Mac address |
00:0E:0C:07:E9:31 (Example) |
|
ethernet_ip_address |
IP address |
10.42.42.77 (Example) |
|
ethernet_netmask |
Network mask |
255.255.255.0 (Default) |
|
architecture |
Target architecture (for example, sun4u, x86) |
x86 (Default) |
|
kernel_arch |
Kernel architecture (sun4u, i86pc) |
i86pc (Default) |
|
disk_size |
Size of disk |
20GB (Default) |
|
osp_control_service |
Whether to call the OSP Control Service, which automates power off, reboot, and power on functions (True, False) |
TRUE (Default) |
|
sps_ra_parent |
Name of parent for RA |
masterserver (Default) |
|
sps_ra_parent_type |
Whether RA parent is an MS or an LD |
MS (Default) |
|
sps_ra_host |
Name or IP address of RA host |
:[installPath] (Default) |
|
sps_ra_conn |
Type of RA connection (raw, ssl, ssh) |
raw (Default) |
|
sps_ra_ssl_auth |
Whether RA has SSL authorization (y,n) |
N (Default) |
|
sps_ra_port |
Port for RA |
1131 (Default) |
|
sps_ra_adv_parms |
Advanced parameters for RA | |
|
guid |
GUID of the target specified within {} |
{3AE45192 159D 11D8 AEF3 001083FDFE8A} (Example) |
|
disk_type |
Disk type (for example, SCSI, IDE) |
scsi (Default) |
|
netmgmt_type_1 |
Network management interface type (ipmi/alom/lom) | |
|
netmgmt_version_1 |
Network management version | |
|
netmgmt_hal_jar_1 |
Path to network management HAL JAR file |
file:///opt/n1osp/drivers/sun/ipmi.jar (Default) |
|
netmgmt_ip_address_1 |
Network management IP address |
|
|
netmgmt_protocol_1 |
Network management protocol (ipmi/telnet) |
telnet (Default) |
|
netmgmt_port_1 |
Network management port | |
|
power_service_true_false_1 |
Does the network management interface provide power on/off service? |
true (Default) |
|
boot_service_true_false_1 |
Does the network management interface provide boot service (disk, then network)? |
false (Default) |
|
console_service_true_false_1 |
Does the network management interface provide console service? |
false (Default) |
|
netmgmt_userid_1 |
User ID to access network management interface | |
|
netmgmt_password_1 |
Encrypted password to access network management interface | |
|
terminal_server_type_1 |
Terminal server type |
Cisco2621 (Default) |
|
terminal_server_version_1 |
Terminal server version | |
|
terminal_server_hal_jar_1 |
Path to terminal server HAL JAR file |
file:///opt/n1osp/drivers/cisco/c2621.jar (Default) |
|
terminal_server_ip_address_1 |
IP address of terminal server connected to this system |
10.5.133.135 (Example) |
|
terminal_server_protocol_1 |
Terminal server access protocol | |
|
terminal_server_port_1 |
Port of terminal server | |
|
terminal_server_access_userid_1 |
Terminal server user id | |
|
terminal_server_access_password_1 |
Encrypted password for terminal server | |
|
netmgmt_type_2 |
Network management interface type (ipmi/alom/lom) | |
|
netmgmt_version_2 |
Network management version | |
|
netmgmt_hal_jar_2 |
Path to network management HAL JAR file |
file:///opt/n1osp/drivers/sun/ipmi.jar (Default) |
|
netmgmt_ip_address_2 |
Network management IP address |
|
|
netmgmt_protocol_2 |
Network management protocol (ipmi/telnet) |
telnet (Default) |
|
netmgmt_port_2 |
Network management port | |
|
power_service_true_false_2 |
Does the network management interface provide power on/off service? |
true (Default) |
|
boot_service_true_false_2 |
Does the network management interface provide boot service (disk, then network)? |
false (Default) |
|
console_service_true_false_2 |
Does the network management interface provide console service? |
false (Default) |
|
netmgmt_userid_2 |
User ID to access network management interface | |
|
netmgmt_password_2 |
Encrypted password to access network management interface | |
|
terminal_server_type_2 |
Terminal server type |
Cisco2621 (Default) |
|
terminal_server_version_2 |
Terminal server version | |
|
terminal_server_hal_jar_2 |
Path to terminal server HAL JAR file |
file:///opt/n1osp/drivers/cisco/c2621.jar (Default) |
|
terminal_server_ip_address_2 |
IP address of terminal server connected to this system |
10.5.133.135 (Example) |
|
terminal_server_protocol_2 |
Terminal server access protocol | |
|
terminal_server_port_2 |
Port of terminal server | |
|
terminal_server_access_userid_2 |
Terminal server user id | |
|
terminal_server_access_password_2 |
Encrypted password for terminal server |
- © 2010, Oracle Corporation and/or its affiliates